References
- Krauss G. Steels. Heat treatment and processing principles. ASM International, USA. 1989: 454.
- Krauss G. Steels. Heat treatment and processing principles. ASM International, USA. 1989: 22.
- Bhadeshia HKDH. Bainite in steels. Transformation, microstructure and properties. 2nd ed. London: The Institute of Materials; 2001. p. 2
- Bhadeshia HKDH. The bainite transformation: unresolved issues. Mater Sci Eng A. 1999;273–275:58–66. doi: 10.1016/S0921-5093(99)00289-0
- Alta Auctoritas Communitatis Europeae Carbonis Ferrique, De Ferri Metallographia I. S.C. Bruxelles: Presses Académiques Européennes; 1966, p. 353.
- Alta Auctoritas Communitatis Europeae Carbonis Ferrique, De Ferri Metallographia I. S.C. Bruxelles: Presses Académiques Européennes; 1966, p. 351 and 357.
- Lindskog P. The history of distaloy. Powder Metall. 56(5):351–361. doi: 10.1179/1743290113Y.0000000077
- Bocchini GF. “Temprabilità degli acciai sinterizzati”, (Hardenability of P/M steels), XXIX Convegno Nazionale Trattamenti Termici, Associazione Italiana di Metallurgia, Piacenza, Italy, X 2013.
- Bocchini GF, Parodi A, Pinasco MR, et al. Influence of sintering conditions on properties of P/M steels based on Cr-prealloyed powders. European PM Conference; 2005 October 2–5; Prague.
- Danninger H, Gierl C. New alloying systems for ferrous powder metallurgy precision parts. Sci Sinter. 2008;40:33–46. doi: 10.2298/SOS0801033D
- Fuentes-Pacheco L, Campos M. Bonding evolution with sintering temperature in low alloyed steels with chromium. Sci Sinter. 2009;41:161–173. doi: 10.2298/SOS0902161F
- Höganäs AB. Metallography, Höganäs handbook for sintered components. Höganäs; 2005. p. 215
- Lindskog P, Thornblad O. Ways to improve the strength of sintered components made from partially prealloyed steel powders. P/M 78, Symposium on Powder Metallurgy, Stockholm, June, 1978.
- Höganäs AB. Höganäs handbook for sintered components. Vol. 6: Metallography. Höganäs; 1999.
- James WB. Microstructure development. EPMA Summer School; 2008 June 21–29; Acqui Terme, Italy.
- Bocchini GF. Tecniche di formazione di lega in metallurgia delle polveri [Alloying techniques in powder metallurgy]. La Metallurgia Italiana. 2002;9: 43–57.
- Rosin P, Rammler E. The laws governing the fineness of powdered coal. J Inst Fuel. 1933;7: 29–36.
- Batel W. Einfuehrung in die Koerngrossenmesstechnik [Introduction to the technique of particle size measurement]. Berlin: Dritte Auflage, Springer-Verlag; 1971.
- Pinasco MR, Pellati G. Caratterizzazione microstrutturale degli acciai sinterizzati [Microstructural characterization of sintered steels]. La Metallurgia Italiana. 2010;6:19–31.
- Bocchini GF. The influences of porosity on the characteristics of sintered materials. SAE Technical Paper 860148, SAE Int. Congress and Exposition; 1986 February 24–28; Detroit, MI.
- Saaritas S, Doherty RD, Lawley A. Effect of porosity of the hardenability of PM steels. Int J Powder Metall. 2002;38(1):31–40.
- Bocchini GF, Baggioli A, Rivolta B, et al. Influence of density and surface/volume ratio on the cooling speed of sinter-hardening materials. Part one: numerical analysis of parallelepipeds. PM World Congress, MPIF-APMI; 2002; Orlando (USA).
- Bocchini GF, Rivolta B, Silva G, et al. Influence of density and surface/volume ratio on the cooling speed of sinter-hardening materials: microstructure and micro-hardness distribution inside parallelepipeds. PM World Congress, MPIF-APMI; 2002; Orlando (USA).
- Bocchini GF, Baggioli A, Gerosa R, et al. Cooling rates of P/M steels. APMI-MPIF. Int J Powder Metall. Sept/Oct 2004;40(5):57–65.
- Bocchini GF. Sinterhardening. In: Colás R, Totten GE, editors. Encyclopedia of iron, steel, and their alloys, five-volume set. Taylor & Francis; 2016.
- Bocchini GF, Ienco MG, Pellati G, et al. Confronto tra caratteristiche di acciai da polveri nominalmente equivalenti sinterizzate alla temperatura di 1125 °C [Comparison between characteristics of steels sintered at 1125°C, based on nominally equivalent powders]. La Metallurgia Italiana. April 2007;4:21–26.
- Bocchini GF, Ienco MG, Pinasco MR, et al. Nominally equivalent powders for P/M steels: analysis of response to sintering and differences at various C content. Mater Sci Forum. 2007;534-536:701–704. doi: 10.4028/www.scientific.net/MSF.534-536.701