Characteristics and printability of K417G nickel-base alloy powder prepared by VIGA method

References

• Du BN, Yang JX, Cui CY, et al. Effects of grain refinement on the microstructure and tensile behavior of K417G superalloy. Mater Sci Eng A. 2015;623:59–67. doi: 10.1016/j.msea.2014.11.041
   Web of Science ®Google Scholar
• Maclachlan DW, Knowles DM. Modelling and prediction of the stress rupture behaviour of single crystal superalloys. Mater Sci Eng A. 2001;302(2):275–285. doi: 10.1016/s0921-5093(00)01829-3
   Web of Science ®Google Scholar
• Gong L, Chen B, Zhang L, et al. Effect of cooling rate on microstructure, microsegregation and mechanical properties of cast Ni-based superalloy K417G. J Mater Sci Technol. 2017;34(5):811–820. doi: 10.1016/j.jmst.2017.03.023
   Web of Science ®Google Scholar
• Lu ZL, Cao JW, Jing H, et al. Review of main manufacturing processes of complex hollow turbine blades. Virtual Phys Prototyp. 2013;8(2):87–95. doi: 10.1080/17452759.2013.790600
   Google Scholar
• Li J, Wang HM. Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene′41 by laser melting deposition manufacturing. Mater Sci Eng A. 2010;527(18–19):4823–4829. doi: 10.1016/j.msea.2010.04.062
   Web of Science ®Google Scholar
• Liang YJ, Li J, Li A, et al. Experimental optimization of laser additive manufacturing process of single-crystal nickel-base superalloys by a statistical experiment design method. J Alloy Compd. 2017;697:174–181. doi: 10.1016/j.jallcom.2016.12.109
   Web of Science ®Google Scholar
• Kapil S, Legesse F, Kumar R, et al. Hybrid layered manufacturing of turbine blades. Mater Today Proc. 2017;4(8):8837–8847. doi: 10.1016/j.matpr.2017.07.234
   Google Scholar
• Li Y, Chen K, Tamura N. Mechanism of heat affected zone cracking in Ni-based superalloy DZ125L fabricated by laser 3D printing technique. Mater Design. 2018;150:171–181. doi: 10.1016/j.matdes.2018.04.032
   Web of Science ®Google Scholar
• Cheng B, Shrestha S, Chou K. Stress and deformation evaluations of scanning strategy effect in selective laser melting. Addit Manuf. 2016;12:240–251. doi: 10.1016/j.addma.2016.05.007
   Web of Science ®Google Scholar
• Xu JJ, Lin X, Guo PF, et al. The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy. J Alloy Compd. 2018;749:859–870. doi: 10.1016/j.jallcom.2018.03.366
   Web of Science ®Google Scholar
• Barr C, Da Sun S, Easton M, et al. Influence of macrosegregation on solidification cracking in laser clad ultrahigh strength steels. Surf Coat Technol. 2018;340:126–136. doi: 10.1016/j.surfcoat.2018.02.052
   Web of Science ®Google Scholar
• Yang C, Zhu MD, Luo X, et al. Influence of powder properties on densification mechanism during spark plasma sintering. Scripta Mater. 2017;139:96–99. doi: 10.1016/j.scriptamat.2017.06.034
   Web of Science ®Google Scholar
• Li XX, Yang C, Chen T, et al. Determination of atomic diffusion coefficient via isochronal spark plasma sintering. Scripta Mater. 2018;151:47–52. doi: 10.1016/j.scriptamat.2018.03.033
   Web of Science ®Google Scholar
• Spierings AB, Herres N, Levy G. Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts. Rapid Prototyping J. 2011;17(3):195–202. doi: 10.1108/13552541111124770
   Web of Science ®Google Scholar
• Cacace S, Demir AG, Semeraro Q. Densification mechanism for different types of stainless steel powders in selective laser melting. Procedia Cirp. 2017;62:475–480. doi: 10.1016/j.procir.2016.06.010
   Google Scholar
• Kakinuma Y, Mori M, Oda Y, et al. Influence of metal powder characteristics on product quality with directed energy deposition of Inconel 625. CIRP Ann-Manuf Technol. 2016;65(1):209–212. doi: 10.1016/j.cirp.2016.04.058
   Web of Science ®Google Scholar
• Wei MW, Chen SY, Liang J, et al. Effect of atomization pressure on the breakup of TA15 titanium alloy powder prepared by EIGA method for laser 3D printing. Vacuum. 2017;143:185–194. doi: 10.1016/j.vacuum.2017.06.014
   Web of Science ®Google Scholar
• Shi CF, Chen SY, Xia Q, et al. Preparation and printability of 24CrNiMo alloy steel powder for selective laser melting fabricating brake disc. Powder Metall. 2017;61(1):1–8. doi: 10.1080/00325899.2017.1396019
   Web of Science ®Google Scholar
• ASTM B213-2013, Standard test methods for flow rate of metal powders using the hall flowmeter funnel.
   Google Scholar
• ASTM B212-2013, Standard test method for apparent density of free-flowing metal powders using the hall flowmeter funnel.
   Google Scholar
• Zheng MY, Zhang SM, Hu Q, et al. Microstructural characterisation of CuAgZr powder particles produced by argon gas atomisation. Powder Metall. 2018;61(3):231–240. doi: 10.1080/00325899.2018.1470288
   Web of Science ®Google Scholar
• German RM. Powder metallurgy science. Princeton: Metal Powder Industries Federation; 1984.
   Google Scholar
• Choi JP, Shin GH, Yang SS, et al. Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting. Powder Technol. 2017;310:60–66. doi: 10.1016/j.powtec.2017.01.030
   Web of Science ®Google Scholar
• Pleass C, Jothi S. Influence of powder characteristics and Additive manufacturing process parameters on the microstructure and mechanical behaviour of Inconel 625 fabricated by Selective Laser Melting, Addit Manuf (2018), doi:10.1016/j.addma.2018.09.023.
   Google Scholar
• Trosch T, Strößner J, Völkl R, et al. Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting. Mater Lett. 2016;164:428–431. doi: 10.1016/j.matlet.2015.10.136
   Web of Science ®Google Scholar
• Xu X, Mi GY, Chen L, et al. Research on microstructures and properties of Inconel 625 coatings obtained by laser cladding with wire. J Alloy Compd. 2017;715:362–373. doi: 10.1016/j.jallcom.2017.04.252
   Web of Science ®Google Scholar
• Srinivasan R, Eggeler GF, Mills MJ. γ′-cutting as rate-controlling recovery process during high-temperature and low-stress creep of superalloy single crystals[J]. Acta Mater. 2000;48(20):4867–4878. doi: 10.1016/S1359-6454(00)00292-5
   Web of Science ®Google Scholar