References
- Vajpai SK, Ameyama K. A novel powder metallurgy processing approachto prepare fine–grained Ti-rich TiAl-based alloys from prealloyed powder. Intermetallics. 2013;42:146–155.
- Selva Kumar M, Chandrasekar P, Chandramohan P, et al. Characterization of titanium–titanium boride composites processed by powder metallurgy techniques. Mater Charact. 2012;73:43–51.
- Hsu H-C, Wu S-C, Hsu S-K, et al. Effect of ball milling on properties of porousTi-7.5Mo alloy for biomedical applications. J Alloys Compd. 2014;582:793–801.
- Daswa P, Gxowa Z, Monareng MJI, et al. Effect of milling speed on the formation of Ti-6Al-4V via mechanical alloying. Mat Sci Eng. 2018;430:012–030.
- Soufiani AM, Karimzadeh F, Enayati MH. Formation mechanism and characterization of nanostructured Ti6Al4V alloy prepared by mechanical alloying. Mater Des. 2012;37:152–160.
- Soufiani M, Enayati MH, Karimzadeh F. Fabrication and characterization of nanostructured Ti6Al4V powder from machining scraps. ADV Powder Technol. 2010;21:336–340.
- Chen ZP, Wen Z, Jiang Q. Phase stability of fccTi nanocrystals. Solid State Commun. 2004;132:747–750.
- Razavi M, Rahimpour MR, Rajabi-Zamani AH. Synthesis of nanocrystallineTiC powder from impure Ti chips via mechanical alloying. J Alloys Compd. 2007;436:142–145.
- Bolzoni L, Ruiz-Navas EM, Neubauer E, et al. Inductive hot-pressing of Titanium and Titanium alloy powders. Mater Chem Phys. 2012;131:672–679.
- Bolokang AS, Phasha MJ. Formation of titanium nitride produced from nanocrystalline titanium powder under nitrogen atmosphere. Int J Refract Met H. 2010;68:610–615.
- Suryanarayana C. Mechanical alloying and milling. Prog Mater Sci. 2001;46:1–184.
- Lu CJ, Zhang J, Li ZQ. Structural evolution of titanium powder during ball milling in different atmosphere. J Alloys Compd. 2004;309:278–283.
- Phasha MJ, Bolokang AS, Ngoepe PE. Solid state transformation in nanocrystallineTi induced by ball milling. Mater Lett. 2010;64:1215–1218.
- Sun F, Froes FH. Synthesis and characterization of mechanical alloyed Ti–x Mg alloys. J Alloys Compd. 2002;340:220–225.
- Zhou JB, Rao KP. Preparation of metastable precursors with different compositions of Ti-Al-Si by mechanical alloying. J Mater Process Technol. 2003;139:434–439.
- Forouzanmehr N, Karimzadeh F, Enayati MH. Synthesis and characterization of TiAl /α-Al2O3 nanocomposite by mechanical alloying. J Alloys Compd. 2009;478:257–259.
- Itsukaichi T, Masuyama K, Umemoto M, et al. Mechanical alloying of Al-Ti powder mixture and their subsequent consolidation. J Mater Res. 1993;8:1817–1828.
- Zhang F, Kaczmarek WA, Lua L, et al. Formation of titanium nitrides via wet reaction ball milling. J Alloys Compd. 2000;307:249–253.
- Suryanarayana C, Chen G, Abdulbaset F, et al. Structural evolution of mechanically alloyed Ti-Al alloys. Mater Sci Eng A. 1992;158:93–101.
- Long Y, Zhang H, Wang T, et al. High strength Ti-6Al-4V with ultrafine grained structure fabricated by high energy ball milling and spark plasma sintering. Mater Sci Eng. A. 2013;585:408–414.
- Williamson GK, Hall WH. X-ray line broadening from field aluminum and wolfram. Acta Metal. 1953;1:22–31.
- Soufiani M, Enayati MH, Karimzadeh F. Mechanical alloying behavior of Ti6Al4V residual scraps with addition of Al2O3 to produce nanostructured powder. Mater Design. 2010;31:3954–3959.
- Sivasankaran S, Sivaprasad K, Narayanasamy R, et al. X-ray peak broadening analysis of AA 6061100 −x−x wt.% Al2O3 nanocomposite prepared by mechanical alloying. Mater Charact. 2011;62(7):661–672.
- Sarwat SG. Contamination in wet-ball milling. Powder Metall. 2017;60(4):267–272.
- Hong S-M, Park J-J, Park E-K, et al. Fabrication of titanium carbide nano powders by a very high-speed planetary ball milling with a help of process control agents. Powder Technol. 2015;274:393–401.
- Neves F, Fernandes FMB, Martins I, et al. Parametric optimization of Ti–Ni powder mixtures produced by mechanical alloying. J Alloys Compd. 2011;509S:S271–S274.
- Dabhade VV, Rama Mohan TR, Ramakrishnan P. Nanocrystalline titanium powders by high energy attrition milling. Powder Technol. 2007;171:177–183.
- Sivasankaran S, Sivaprasad K, Narayanasamy R, et al. An investigation on flowability and compressibility of AA 6061-100−x-x wt.% TiO2 micro and nanocomposite powder prepared by blending and mechanical alloying. Powder Technol. 2010;201:70–82.
- Adamiak M. Mechanical alloying for fabrication of aluminium matrix composite powders with Ti-Al intermetallics reinforcement. J Achiev Mater Manuf Eng. 2008;31:191–196.
- Chao Q, Hodgson PD, Beladi H. Microstructure evolution of Martensitic Ti-6Al-4V alloy during warm deformation. Metall Mater Trans A. 2014;783:679–684.
- Falodun OE, Obadele BA, Oke SR, et al. Infuence of spark plasma sintering on microstructure and wear behaviour of Ti–6Al–4V reinforced with nanosizedTiN. Trans Nonferr Metals Soc China. 2018;28:47–54.
- Li-juan XU, Shu-long XIAO, Yu-yong CHEN, et al. Microstructure and mechanical properties of Ti43Al9V alloy fabricated by spark plasma sintering. Trans Nonferrous Met Soc China. 2012;22:768–772.
- Hussein MA, Suryanarayana C, Al-Aqeeli N. Fabrication of nano-grained Ti–Nb–Zr biomaterials using spark plasma sintering. Mater Des. 2015;87:693–700.
- Henriques VAR, Galvani ET, Petroni SLG, et al. Production of Ti–13Nb–13Zr alloy for surgical implants by powder metallurgy. J Mater Sci. 2010;45:5844–5850.