References
- Aryanpour G, Farzaneh M. Application of a piston equation to describe die compaction of powders. Powd Metall. 2015;277:120–125.
- Montes JM, Cuevas FG, Cintas J, et al. On the compressibility of metal powders. Powd Metall. 2018;61(3):219–230.
- Cristofolini I, Molinari A, Zago M, et al. The analysis of the densification curve of metallic powders in uniaxial cold compaction. Adv Powd Metall Part Mater. 2019;1:30–41.
- Zago M, Cristofolini I, Molinari A. New interpretation for the origin of the anisotropic sintering shrinkage of AISI 316L rings based on the anisotropic stress field occurred on uniaxial cold compaction. Powd Metall. 2019;62(2):115–123.
- Baselli S, Molinari A. Sintering shrinkage of uniaxial cold compacted iron: a new shrinkage kinetic equation accounting for the microstructure of green parts. Powder Metall. 2019;62(1):1–7.
- Shima Y, Ishikawa Y, Nitta H, et al. Self-diffusion along dislocations in ultra high purity iron. Mater Trans. 2002;43(2):173–177.
- Baselli S, Torresani E, Zago M, et al. Sintering shrinkage of uniaxial cold compacted iron: influence of the microstructure on the anisothermal and isothermal shrinkage of uniaxial cold-compacted iron. Powder Metall. 2018;61(4):276–284.
- Torresani E, Giuntini D, Zhu C, et al. Anisotropy of mass transfer during sintering of powder materials with pore–particle structure orientation. Metall Mater Trans A. 2019;50:1033–1049.
- Wendel J, Manchili SK, Hryha E, et al. Sintering behaviour of compacted water-atomised iron powder: effect of initial state and processing conditions. Powder Metall. 2020;63(5):338–348.
- Friedrich E, Schatt W. Sintering of one-component model systems: nucleation and movement of dislocations in necks. Powd Metall. 1980;23:193–197.
- Friedrich E, Schatt W, Joensson D. Spannungsverteilung und Versetzungsvervielfachung in der Sinterkontaktregion. Acta Metall. 1983;31:121–128.
- Friedrich E, Schatt W. High temperature plasticity in solid phase sintering. Sci. Sinter. 1983;5:63–71.
- Lanyi P, Hermel W. Structural activity and shrinkage kinetics in early stages of sintering process. Powd Metall. 1981;24:93–100.
- Molinari A, Zago M, Amirabdollahian S, et al. Effect of geometry and green density on the anisotropic sintering shrinkage of axisymmetric iron parts. Powd Metall. 2018;61(4):267–275.
- Molinari A, Zago M, Amirabdollahian S, et al. Anisotropic sintering shrinkage of ring shaped iron parts: effect of geometry and green density and correlation to the stress field during uniaxial cold compaction). EuroPM2017 Proceedings; 2017 Oct 1–5; Milano, Italy, ed. EPMA (Shrewsbury), CD.
- Baselli S, Molinari A. A dilatometry study of the influence of green density on anisothermal and isothermal shrinkage of plain iron green parts. Powd Metall. 2020;63(3):155–162.
- Höganäs handbook for sintered components, ISBN 978-91-983614-0-7
- Brandes EA, Brook GB, Smithells CJ. Smithells metals reference book. London: Butterworth-Heinemann; 1998.
- Podder AS, Lonardelli I, Molinari A, et al. Thermal stability of retained austenite in bainitic steel: an in situ study. Proc R Soc A. 2011;467:3141–3156.
- Lame O, Bellet D, Di Michiel M, et al. Bulk observation of metal powder sintering by X-ray synchrotron microtomography. Acta Mater. 2004;52:977–984.
- Vagnon A, Lame O, Bouvard D, et al. Deformation of steel powder compacts during sintering: correlation between macroscopic measurement and in situ microtomography analysis. Acta Mater. 2006;54:513–522.