Preparation of TiC reinforced CrMo steel by 3D gel-printing

References

• Song SH, Faulkner RG, Flewitt PEJ, et al. Temper embrittlement of a CrMo low-alloy steel evaluated by means of small punch testing. Mater Sci Eng A. 2000;281(1–2):75–81.
   Web of Science ®Google Scholar
• Pekovi M, Vrtáek J, Janda T, et al. Induction hardening of steels with use of the device for incremental forming of round bars HDQT-R 30-12. IOP Conf Ser: Mater Sci Eng. 2020;723(1): 012025(7pp).
   Google Scholar
• Li D, Zhu Z, Xiao S, et al. Plastic flow behavior based on thermal activation and dynamic constitutive equation of 25CrMo4 steel during impact compression. Mater Sci Eng A. 2017;707:459–465.
   Web of Science ®Google Scholar
• Xie B-S, Cai Q-W, Yu W, et al. Prediction for flow stress of 95CrMo hollow steel during hot compression. Acta Metall Sin. 2017;30(3):250–260.
   Web of Science ®Google Scholar
• Lin YC, Chen M-S, Zhong J. Constitutive modeling for elevated temperature flow behavior of 42CrMo steel. Comput Mater Sci. 2008;42(3):470–477.
   Web of Science ®Google Scholar
• Peral LB, Zafra A, Blasón S, et al. Effect of hydrogen on the fatigue crack growth rate of quenched and tempered CrMo and CrMoV steels. Int J Fatigue. 2019;120:201–214.
   Web of Science ®Google Scholar
• Ijiri M, Yoshimura T. Surface modification of Cr-Mo steel by new technology using high speed jet in water under ultrasonic irradiation. MATEC Web Conf. 2018;207: 03023(5pp).
   Google Scholar
• Abdollah-Zadeh A, Salemi A, Assadi H. Mechanical behavior of CrMo steel with tempered martensite and ferrite-bainite-martensite microstructure. Mater Sci Eng A. 2006;483:325–328.
   Web of Science ®Google Scholar
• Li Z, Xiao N, Li D, et al. Effect of microstructure evolution on strength and impact toughness of G18CrMo2-6 heat-resistant steel during tempering. Mater Sci Eng A. 2014;604:103–110.
   Web of Science ®Google Scholar
• Huang L, Deng X, Wang Q, et al. Microstructure, mechanical properties and wear resistance of low alloy abrasion resistant martensitic steel reinforced with TiC particles: mechanical properties. ISIJ Int. 2020;60(11):2586–2595.
   Web of Science ®Google Scholar
• Xing ZG, Lu ZL, Zhou YX, et al. An investigation on erosion wear characteristics of SiC particle reinforced steel matrix surface composite. Mater Sci Forum. 2009;620–622:323–326.
   Google Scholar
• Rokanopoulou A, Skarvelis P, Papadimitriou GD. Microstructure and wear properties of the surface of 2205 duplex stainless steel reinforced with Al2O3 particles by the plasma transferred arc technique. Surf Coat Technol. 2014;254:376–381.
   Web of Science ®Google Scholar
• Kan WH, Proust G, Bhatia V, et al. Slurry erosion, sliding wear and corrosion behavior of martensitic stainless steel composites reinforced in-situ with NbC particles. Wear. 2019; 420–421:149–162.
   Web of Science ®Google Scholar
• Pan Y, Liu A, Huang L, et al. Effects of metal binder content and carbide grain size on the microstructure and properties of SPS manufactured WC-Fe composites. J Alloys Compd. 2019;784:519–526.
   Web of Science ®Google Scholar
• Zhang W, Zhang X, Wang J, et al. Effect of Fe on the phases and microstructure of TiC-Fe cermets by combustion synthesis/quasi-isostatic pressing. Mater Sci Eng A. 2004;381(1–2):92–97.
   Web of Science ®Google Scholar
• Zheng Y, Zhou Y, Feng Y, et al. Synthesis and mechanical properties of TiC-Fe interpenetrating phase composites fabricated by infiltration process. Ceram Int. 2018;44(17):21742–21749.
   Web of Science ®Google Scholar
• Sheikhzadeh M, Sanjabi S. Structural characterization of stainless steel/TiC nanocomposites produced by high-energy ball-milling method at different milling times. Mater Des. 2012;39:366–372.
   Web of Science ®Google Scholar
• Akhtar F. Microstructure evolution and wear properties of in situ synthesized TiB2 and TiC reinforced steel matrix composites. J Alloys Compd. 2007;459(1):491–497.
   Web of Science ®Google Scholar
• Wang Z, Lin T, He X, et al. Fabrication and properties of the TiC reinforced high-strength steel matrix composite. Int J Refract Met Hard Mater. 2016;58:14–21.
   Web of Science ®Google Scholar
• Lin T, Guo Y, Wang Z, et al. Effects of chromium and carbon content on microstructure and properties of TiC-steel composites. Int J Refract Met Hard Mater. 2018;72:228–235.
   Web of Science ®Google Scholar
• Lee Y-H, Kim N, Lee S-B, et al. Microstructure and mechanical properties of lightweight TiC-steel composite prepared by liquid pressing infiltration process. Mater Charact. 2020;162: 110202.
   Web of Science ®Google Scholar
• Dai H, Li J, Zhai F, et al. Effect of molybdenum on the microstructure and mechanical properties of TiC-Fe cermets. Adv Mat Res. 2012;557–559(1):205–208.
   Google Scholar
• Aramian A, Razavi SMJ, Sadeghian Z, et al. A review of additive manufacturing of cermets. Addit Manuf. 2020;33:101130.
   Web of Science ®Google Scholar
• Behera MP, Dougherty T, Singamneni S. Conventional and additive manufacturing with metal matrix composites: a perspective. Procedia Manuf. 2019;30:159–166.
   Google Scholar
• Padmakumar M. Additive manufacturing of tungsten carbide hardmetal parts by selective laser melting (SLM), selective laser sintering (SLS) and binder jet 3D printing (BJ3DP) techniques. Lasers Manuf Mater Process. 2020;7(3):338–371.
   Google Scholar
• Dadbakhsh S, Mertens R, Hao L, et al. Selective laser melting to manufacture “In situ” metal matrix composites: a review. Adv Eng Mater. 2019;21(3): 1801244.
   Web of Science ®Google Scholar
• Bandyopadhyay A, Zhang Y, Bose S. Recent developments in metal additive manufacturing. Curr Opin Chem Eng. 2020;28:96–104.
   PubMed Web of Science ®Google Scholar
• Shi J, Wang Y. Development of metal matrix composites by laser-assisted additive manufacturing technologies: a review. J Mater Sci. 2020;55(23):9883–9917.
   Web of Science ®Google Scholar
• Vaezi M, Drescher P, Seitz H. Beamless metal additive manufacturing. Materials. 2020;13(4):922–957.
   PubMed Web of Science ®Google Scholar
• Frazier WE. Metal additive manufacturing: a review. J Mater Eng Perform. 2014;23(6):1917–1928.
   Web of Science ®Google Scholar
• Yang F, Zhang X, Guo Z, et al. 3D gel-printing of Sr ferrite parts. Ceram Int. 2018;44(18):22370–22377.
   Web of Science ®Google Scholar
• Ren X, Shao H, Lin T, et al. 3D gel-printing-an additive manufacturing method for producing complex shape parts. Mater Des. 2016;101:80–87.
   Web of Science ®Google Scholar
• Zhang Z, Lin T, Shao H, et al. Preparation of 3DGP dense zirconia parts by two-step method: staggered stacking method and printing wire deformation. Ceram Int. 2020;46(5):6491–6496.
   Web of Science ®Google Scholar
• Qin Q, Yang F, Zhang X, et al. 3D printing of tantalum parts based on low molecular mass organic gel system. Int J Refract Met Hard Mater. 2019;84:105014.
   Web of Science ®Google Scholar
• Zhang X, Guo Z, Chen C, et al. Additive manufacturing of WC-20Co components by 3D gel-printing. Int J Refract Met Hard Mater. 2018;70:215–223.
   Web of Science ®Google Scholar
• Zhang X, Guo L, Yang F, et al. 3D gel printing of graded TiC-high manganese steel cermet. J Mater Sci. 2019;54(3):2122–2132.
   Web of Science ®Google Scholar
• Ji Z, Zhao D, Hao J, et al. 3D gel-printing of TiC-reinforced 316L stainless steel: influence of the printing parameters. J Mater Eng Perform. 2018;27(10):5500–5510.
   Web of Science ®Google Scholar
• Shao H, He J, Lin T, et al. 3D gel-printing of hydroxyapatite scaffold for bone tissue engineering. Ceram Int. 2019;45(1):1163–1170.
   Web of Science ®Google Scholar
• Zhang Z, Lin T, Shao H, et al. Effect of different dopants on porous calcium silicate composite bone scaffolds by 3D gel-printing. Ceram Int. 2020;46(1):325–330.
   Web of Science ®Google Scholar
• Xing H, Zou B, Liu X, et al. Effect of particle size distribution on the preparation of ZTA ceramic paste applying for stereolithography 3D printing. Powder Technol. 2020;359:314–322.
   Web of Science ®Google Scholar
• Bae C-J, Halloran JW. Concentrated suspension-based additive manufacturing-viscosity, packing density, and segregation. J Eur Ceram Soc. 2019;39(14):4299–4306.
   Web of Science ®Google Scholar
• Krieger IM, Dougherty TJ. A mechanism for non-Newtonian flow in suspensions of rigid spheres. Trans Soc Rheol. 1959;3(1):137–152.
   Web of Science ®Google Scholar
• Zhang K, He R, Xie C, et al. Photosensitive ZrO2 suspensions for stereolithography. Ceram Int. 2019;45(9):12189–12195.
   Web of Science ®Google Scholar
• Richardson JF, Zaki WN. Sedimentation and fluidization: part I. Trans Inst Chem Eng. 1954;32:35–53.
   Google Scholar
• Sun J, Binner J, Bai J. 3D printing of zirconia via digital light processing: optimization of slurry and debinding process. J Eur Ceram Soc. 2020;40(15):5837–5844.
   Web of Science ®Google Scholar
• Li K, Zhao Z. The effect of the surfactants on the formulation of UV-curable SLA alumina suspension. Ceram Int. 2017;43(6):4761–4767.
   Web of Science ®Google Scholar
• Feng C, Zhang K, He R, et al. Additive manufacturing of hydroxyapatite bioceramic scaffolds: dispersion, digital light processing, sintering, mechanical properties, and biocompatibility. J Adv Ceram. 2020;9(3):360–373.
   Web of Science ®Google Scholar
• Tjong S C. Novel nanoparticle-reinforced metal matrix composites with enhanced mechanical properties. Adv Eng Mater. 2007;9(8):639–652.
   Web of Science ®Google Scholar
• AlMangour B, Grzesiak D, Yang J-M. Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: influence of starting TiC particle size and volume content. Mater Des. 2016;104:141–151.
   Web of Science ®Google Scholar
• Website https://www.dew-stahl.com/en/products/special-materials/ferro-titanit.
   Google Scholar