References
- Martin CL, Bouvard D, Shima S. Study of particle rearrangement during powder compaction by the discrete element method. J Mech Phys Solids. 2003;51:667–693.
- Bouvard D, Cizeron G. Recherche (Paris, 1970). 1994;270:1144.
- German, Randall M. Met Powder Ind Fed. 1984;08540:279.
- Olsson E, Larsson PL. A numerical analysis of cold powder compaction based on micromechanical experiments. Powder Technol. 2013;243:71–78.
- Brown S, Abou-Chedid G. Yield behavior of metal powder assemblages. J Mech Phys Solids. 1994;42:383–399.
- Martin CL. Elasticity, fracture and yielding of cold compacted metal powders. J Mech Phys Solids. 2004;52:1691–1717.
- Fleck NA. On the cold compaction of powders. J Mech Phys Solids. 1995;43:1409–1431.
- Kano J, Kasai E, Saito F, et al. Numerical simulation model for granulation kinetics of iron ores. ISIJ Int. 2005;45:500–505.
- Stewart RL, Bridgwater J, Zhou YC, et al. Simulated and measured flow of granules in a bladed mixer—a detailed comparison. Chem Eng Sci. 2001;56:5457–5471.
- Di Maio FP, Di Renzo A, Trevisan D. Comparison of heat transfer models in DEM-CFD simulations of fluidized beds with an immersed probe. Powder Technol. 2009;193:257–265.
- Kaneko Y, Shiojima T, Horio M. DEM simulation of fluidized beds for gas-phase olefin polymerization. Chem Eng Sci. 1999;54:5809–5821.
- Sheng Y, Lawrence CJ, Briscoe BJ, et al. Numerical studies of uniaxial powder compaction process by 3D DEM. Eng Comput (Swansea). 2004;21:304–317.
- Jeong JH, Ryu SK, Park SJ, et al. Analysis of iron powder design for compaction process. Comput Mater Sci. 2015;100:21–30.
- Jeong JH, Choi J. A study on graphite powder compaction behaviors using the discrete element method. J. Korean Powder Metall Inst. 2021;28:1–6.
- Di Renzo A, Di Maio FP. An improved integral non-linear model for the contact of particles in distinct element simulations. Chem Eng Sci. 2005;60:1303–1312.
- Mindlin RD. Compliance of elastic bodies in contact. J Appl Mech. 1949;16:259–268.
- Jerier JF, Hathong B, Richefeu V, et al. Study of cold powder compaction by using the discrete element method. Powder Technol. 2011;208:537–541.
- Yang HY, Kim JH, Kim YW, et al. A study on wear properties of solid lubricating graphite materials. J Korean Soc Propuls Eng. 2013;17:95–100.
- Furlan KP, Goncalves PC, Consoni DR, et al. Metallurgical aspects of self-lubricating composites containing graphite and MoS2. J Mater Eng Perform. 2017;26:1135–1145.
- Binder C, Hammes G, Schroeder R, et al. ‘Fine tuned’ steels point the way to a focused future. Met Powder Rep. 2010;65:29–37.
- Rosato A, Strandburg KJ, Prinz F, et al. Why the Brazil nuts are on top: size segregation of particulate matter by shaking. Phys Rev Lett. 1987;58:1038–1040.
- Lammens RF, Liem TB, De Blaey CJ. Evaluation of force–displacement measurements during one-sided powder compaction in a die – the influence of friction with the die wall and of the diameter of punches and die on upper and lower punch pressure. Powder Technol. 1980;26:169–185.
- Choi JL, Gethin DT. Model Simul. 2009;17:22.