Influence of initial defect density on mechanical properties of AISI H13 hot-work tool steel produced by laser powder bed fusion and hot isostatic pressing

References

• Yap CY, Chua CK, Dong ZL, et al. Review of selective laser melting: materials and applications. Appl Phys Rev. 2015;2:041101.
   Web of Science ®Google Scholar
• Baumers M, Dickens P, Tuck C, et al. The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technol Forecast Soc Change. 2016;102:193–201.
   Web of Science ®Google Scholar
• Makoana N, Yadroitsava I, Möller H, et al. Characterization of 17-4PH single tracks produced at different parametric conditions towards increased productivity of LPBF systems – the effect of laser power and spot size upscaling. Metals (Basel). 2018;8:475.
   Web of Science ®Google Scholar
• Casalino G, Campanelli SL, Contuzzi N, et al. Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel. Opt Laser Technol. 2015;65:151–158.
   Web of Science ®Google Scholar
• Yadroitsev I, Krakhmalev P, Yadroitsava I. Hierarchical design principles of selective laser melting for high quality metallic objects. Addit Manufact. 2015;7:45–56.
   Web of Science ®Google Scholar
• Stoffregen HA, Butterweck K, Abele E. Fatigue analysis in selective laser melting. Review and investigation of thin-walled actuator housings solid freeform fabrication symposium. p. 635–650.
   Google Scholar
• Molaei R, Fatemi A. Fatigue design with additive manufactured metals: issues to consider and perspective for future research. Procedia Eng. 2018;213:5–16.
   Google Scholar
• Sames WJ, List FA, Pannala S, et al. The metallurgy and processing science of metal additive manufacturing. Int Mater Rev. 2016;61:315–360.
   Web of Science ®Google Scholar
• Yadollahi A, Shamsaei N. Additive manufacturing of fatigue resistant materials: challenges and opportunities. Int J Fatigue. 2017;98:14–31.
   Web of Science ®Google Scholar
• Gerling R, Leitgeb R, Schimansky F-P. Porosity and argon concentration in gas atomized γ-TiAl powder and hot isostatically pressed compacts. Mater Sci Eng A. 1998;252:239–247.
   Web of Science ®Google Scholar
• Atkinson HV, Davies S. Fundamental aspects of hot isostatic pressing: An overview. Metall Mater Trans A. 2000; 31:2981–3000.
   Web of Science ®Google Scholar
• Vilaro T, Colin C, Bartout JD. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. Mat Trans A. 2011;42:3190–3199.
   Web of Science ®Google Scholar
• Schulze G. Die Metallurgie des Schweissens: Eisenwerkstoffe - Nichteisenmetallische Werkstoffe (VDI-Buch). 4th ed. Berlin: Springer-Verlag Berlin Heidelberg; 2010.
   Google Scholar
• Over C. Generative Fertigung von Bauteilen aus Werkzeugstahl X38CrMoV5-1 und Titan TiAl6V4 mit ‘Selective Laser Melting’ (Berichte aus der Lasertechnik). Aachen: Shaker; 2003.
   Google Scholar
• Sames WJ, Medina FR, Peter WH, et al. Effect of process control and powder quality on Inconel 718 produced using electron beam melting.
   Google Scholar
• Zhang B, Li Y, Bai Q. Defect formation mechanisms in selective laser melting: a review chin. J Mech Eng. 2017;30:515–527.
   Web of Science ®Google Scholar
• Åsberg M, Fredriksson G, Hatami S, et al. Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel. Mater Sci Eng A. 2019;742:584–589.
   Web of Science ®Google Scholar
• Qiu C, Adkins NJE, Attallah MM. Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V. Mater Sci Eng A. 2013;578:230–239.
   Web of Science ®Google Scholar
• Yali L, Hai Q, Huipeng H, et al. Effects of Hot isostatic pressing on microstructure and mechanical properties of hastelloy×samples produced by selective laser melting. Adv Eng Res (AER). 2017;102:31–40.
   Google Scholar
• Tillmann W, Schaak C, Nellesen J, et al. Hot isostatic pressing of IN718 components manufactured by selective laser melting. Addit Manufact. 2017;13:93–102.
   Web of Science ®Google Scholar
• Tammas-Williams S, Withers PJ, Todd I, et al. Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components. Scr Mater. 2016;122:72–76.
   Web of Science ®Google Scholar
• Cunningham R, Nicolas A, Madsen J, et al. Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V. Mater Res Lett. 2017;5:516–525.
   Web of Science ®Google Scholar
• Broeckmann C. Toughness of duplex steel produced by PM-HIP. 2019. 169–181.
   Google Scholar
• Swedish standards institute (SS118000:2018). Powder metallurgy – hot isostatic pressing – argon detection using gas chromtagraphy and mass spectrometry techniques. 2018
   Google Scholar
• Mellin P, Östlund M, Fredriksson W, et al. Detecting argon trapped in reference samples made by hot isostratic. Pressing Proceedings of WorldPM; 2018.
   Google Scholar
• Hofer B, Volker K-U, Bigolin F. Effect of argon on HIP parts, permissible values and concentration determination. Powder Metall. 2012;55:329–332.
   Web of Science ®Google Scholar
• Hellman P. High speed steels by powder metallurgy. Scand J Metall. 1998;27:44–52.
   Google Scholar
• Suryawanshi J, Prashanth KG, Ramamurty U. Mechanical behavior of selective laser melted 316L stainless steel. Mater Sci Eng A. 2017;696:113–121.
   Web of Science ®Google Scholar
• Attar H, Calin M, Zhang LC, et al. Manufacture by selective laser melting and mechanical behavior of commercially pure titanium. Mater Sci Eng A. 2014;593:170–177.
   Web of Science ®Google Scholar
• Schindelin J, Arganda-Carreras I, Frise E, et al. Fiji: an open-source platform for biological-image analysis. Nat Methods. 2012;9:676–682.
   PubMed Web of Science ®Google Scholar
• DIN German Institute for Standardization DIN EN ISO 6507-1. Metallic materials- Vickers hardness test: Part 1: Test method (ISO 6507-1:2016). 2016
   Google Scholar
• Murakami Y. Metal fatigue: effects of small defects and nonmetallic inclusions. 1st ed. Amsterdam: Elsevier; 2002.
   Google Scholar
• Klubberg F, Hempen M, Beiss P. PC-Software SAFD, Statistical Analysis of Fatigue Data - Statistical Evaluation of Fatigue Tests. Materialprüfung; 41(9):362–367.
   Google Scholar
• Woo Y, Hwang T, Oh I, et al. Analysis on selective laser melting of WC-reinforced H13 steel composite powder by finite element method. Advances in Mechanical Engineering. 2019;11:168781401882220.
   Web of Science ®Google Scholar
• Shao S, Mahtabi MJ, Shamsaei N, et al. Solubility of argon in laser additive manufactured α-titanium under hot isostatic pressing condition. Comput Mater Sci. 2017;131:209–219.
   Web of Science ®Google Scholar
• Liljestrand F. Porosity closure during hot isostatic pressing of AM Ni-based IN718; 2019.
   Google Scholar
• Kosonen T, Kakko K, Raitanen N. Evaluation of pore re-opening after HIP in LPBF Ti-6Al-4V. Proceedings EuroPM, virtual congress; 2020.
   Google Scholar
• DIN EN ISO 4957. Werkzeugstähle. 2017.
   Google Scholar