References
- Lu XF, Wang HM. Microstructural characterization and dry sliding wear resistance of MoO2-strengthened γ/NiMo alloys with different primary phases. Mater Charact. 2009;60:834–842. doi:https://doi.org/10.1016/j.matchar.2009.01.016.
- Lu XF, Wang HM. Effect of MoO2 on high-temperature wear resistance of a laser melting deposited γ/NiMo alloy. J Alloy Compd. 2009;469:472–477. doi:https://doi.org/10.1016/j.jallcom.2008.01.146.
- González G, Sagarzazu A, Villalba R, et al. Comparative study of NiW, NiMo and MoW prepared by mechanical alloying. J Alloy Compd. 2007;434–435:525–529.
- Moze O, Cable JW. Lattice distortions and atomic short range order in NiMo alloys. Phys B. 1989;156–157:724–726.
- Maleki K, Alemipour Z. Electrodeposition and characterization of NiCr alloy nanowires. Appl Phys A. 2017;123:397.
- Duan DZ, Li CS, Ding JJ, et al. Microstructure and performance of brazed diamond segments with NiCr-x (CuCe) composite alloys. Ceram Int. 2020;46:13180–13188. doi:https://doi.org/10.1016/j.ceramint.2020.02.092.
- Yin YR, Ren CL, Han H, et al. First-principle atomistic thermodynamic study on the early-stage corrosion of NiCr alloy under fluoride salt environment. Phys Chem Chem Phys. 2018;20:28832–28839. doi:https://doi.org/10.1039/C8CP05045G.
- Latu-Romain L, Mathieu S, Vilasi M, et al. The role of oxygen partial pressure on the nature of the oxide scale on a NiCr model alloy. Oxid Met. 2017;88:481–493. doi:https://doi.org/10.1007/s11085-016-9670-8.
- Kvackaj T, Zrnik J, Vrchovinsky V, et al. Influence of plastic deformation on creep behaviour of NiMoCr alloy. High Temp Mater Process. 2003;22:57–62. doi:https://doi.org/10.1515/HTMP.2003.22.1.57.
- Turchi PEA, Kaufman L, Liu ZK. Modeling of Ni-Cr-Mo based alloys: part I-phase stability. Calphad. 2006;30:70–87. doi:https://doi.org/10.1016/j.calphad.2005.10.003.
- Chang SH, Chang CY, Huang KT, et al. Effect of process parameters on the microstructure and mechanical properties of vacuum hot-press sintered Co-50 mass% Cr alloys. Powder Metall. 2018;61:323–333. doi:https://doi.org/10.1080/00325899.2018.1495884.
- Chang SH, Lin LY, Huang KT. In situ TEM observation of the microstructural characteristics and mechanical properties of vacuum hot-press sintered Co-30Cr-6Mo alloys. Vacuum. 2000;176:109333, doi:https://doi.org/10.1016/j.vacuum.2020.109333.
- Yan SR, Lyu Z, Foong LK. Effects of SiC amount and morphology on the properties of TiB2-based composites sintered by hot-pressing. Cerm Int. 2020;46:18813–18825. doi:https://doi.org/10.1016/j.ceramint.2020.04.199.
- Zhang S, Guo XP, Tang Y, et al. Microstructure and properties of Mn-Cu-based damping alloys prepared by ball milling and hot-press sintering. J Mater Eng Perform. 2019;28:2641–2648. doi:https://doi.org/10.1007/s11665-019-04043-w.
- Chang SH, Lin SS, Huang KT. Effect of CrSi/CrSi2 content on the microstructure and properties of vacuum hot-pressed Cr-50 wt% Si alloys. Vacuum. 2019;162:54–62. doi:https://doi.org/10.1016/j.vacuum.2019.01.023.
- Chang SH, Li CL, Huang KT, et al. Effect of vacuum hot-press process on the sintered characteristics and mechanical properties of a high-density Cr-31.2 mass% Ti alloy. Arch Metall Mater. 2018;63:1715–1723.
- Chang SH, Chuang CY, Huang KT. Mechanical properties and microstructures of Mo2Cstrengthened vanadis 4 extra alloy steel by powder metallurgy and heat treatments. ISIJ Int. 2019;59:1354–1361. doi:https://doi.org/10.2355/isijinternational.ISIJINT-2018-781.
- Mat Navi, NIMS Material. https://crystdb.nims.go.jp/crystdb/search-materials (accessed 2020-5-30).
- Gozlan E, Bamberger M, Dirnfeld SF, et al. Topologically close-packed precipitations and phase diagrams of Ni-Mo-Cr and Ni-Mo-Fe and of Ni-Mo-Fe with constant additions of chromium. Mater Sci Eng A. 1991;141:85–95. doi:https://doi.org/10.1016/0921-5093(91)90712-V.
- He YM, Yang JG, Fu W, et al. An analysis of formation mechanism and nano-scale hardness of thelaser-induced coating on Ni-17Mo-7Cr based superalloy. J Alloy Compd. 2016;673:8–16. doi:https://doi.org/10.1016/j.jallcom.2016.02.241.
- Dymek S, Dollar M, Farooqi M. Optimization of mechanical properties of a Ni-Mo-Cr alloy by structural modifications induced by changes in heat treatment. Mater Sci Eng A. 2001: 319–321. 284–289.
- Karaköse E, Keskin M. Effect of microstructural evolution and elevated temperature on the mechanical properties of Ni-Cr-Mo alloys. J Alloy Compd. 2015;619:82–90. doi:https://doi.org/10.1016/j.jallcom.2014.09.036.
- Hall EO. The deformation and ageing of mild steel: III discussion of results. Proc Phys Soc B. 1951;64:747–753. doi:https://doi.org/10.1088/0370-1301/64/9/303.
- Petch NJ. The cleavage strength of polycrystals. J Iron Steel Inst. 1953;174:25–28.