References
- Liu Y, Tang M, Hu Q, et al. Densification behavior, microstructural evolution, and mechanical properties of TiC/AISI420 stainless steel composites fabricated by selective laser melting. Mater Des. 2019;187:108381.
- Brnic J, Turkalj G, Canadija M, et al. Martensitic stainless steel AISI 420-mechanical properties, creep and fracture toughness. Mech Time-Depend Mater. 2011;15(4):341–352.
- Lenda OB, Tara A, Lazar F, et al. Structural and mechanical characteristics of AISI 420 stainless steel after annealing. Strength Mater. 2020;52(1):71–80.
- Barlow LD, Toit MD. Effect of austenitizing heat treatment on the microstructure and hardness of martensitic stainless steel AISI 420. J Mater Eng Perform. 2012;21(7):1327–1336.
- Sadhasivam M, Mohan N, Sankaranarayanan SR, et al. Investigation on mechanical and tribological behaviour of titanium diboride reinforced martensitic stainless steel. Mater Res Express. 2020;7(1):1–13.
- Yuan DW, Cui H, Kang YH, et al. [Study on NaCl electrolyte etching of 420 stainless steel]. Liaoning Chemical Industry. 2017;46(05):445–447. China.
- Zhang YJ, song B, Zhao X, et al. [Selective laser melting and subtractive hybrid manufacture AISI420 stainless steel: evolution on surface roughness and residual stress]. J Mech Eng. 2018;54(13):170–178. China.
- Krakhmalev P, Yadroitsava I, Fredriksson G, et al. In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels. Mater Des. 2015;87:380–385.
- Silverman DE, Chu B, Jacoby BE, et al. Evaluation of micro-drilling technologies for metal-injection-molded 420 stainless steel. Mach Sci Technol. 2016;20(3):368–385.
- Nath SD, Gupta G, Kearns M, et al. Effects of layer thickness in laser-powder bed fusion of 420 stainless steel. Rapid Prototyp J. 2020;26(7):1197–1208.
- Ghaffari M, Nemani AV, Nasiri A. Interfacial bonding between a wire arc additive manufactured 420 martensitic stainless steel part and its wrought base plate. Mater Chem Phys. 2020;251:123199.
- Lou J, Liu M, He H, et al. Investigation of decarburization behaviour during the sintering of metal injection moulded 420 stainless steel. Metals. 2020;10(2):1–10.
- Zhang Z, Yu T, Kovacevic R. Erosion and corrosion resistance of laser cladded AISI 420 stainless steel reinforced with VC. Appl Surf Sci. 2017;410:225–240.
- Jiang XQ, Li DX, Lu RW, et al. [Study on the preparation and application of plastic based feedstock for 420 stainless steel injection molding]. World Nonferrous Met. 2019;540(24):203–205. China.
- An CF, He H, Li YM, et al. [Effect of C and Nb on sintering densification and mechanical properties of MIM 420 stainless steel]. J Guangxi Univ Sci Technol. 2018;29(2):63–69 + 96. China.
- Wang JF, He H, Li YM, et al. [Effect of Nb addition on corrosion resistance of metal injection molding 420 stainless steel]. Guangdong Chem Ind. 2019;46(3):3–7. China.
- Wähling R, Beiss P, Huppmann WJ. Sintering behaviour and performance data of high speed steel components. Powder Metall. 2013;29(1):53–56.
- Yang T, Zheng JM, Liu XG, et al. [Influence of sintering temperature on microstructure and properties of 420 stainless steel PM sintered body]. Powder Metall Technol. 2016;34(5):373–379. China.
- Zhao M, Guo YK, Yu ZM, et al. [Influence of sintering temperature on densification and flexural strength of stainless steel (316L)]. J Harbin Univ Sci Technol. 2000;5(3):105–107. China.
- Ke MY. [Sintering behavior of 316L stainless steel powder]. Powder Metall Ind. 2012;22(5):29–32. China.
- Nath SD, Irrinki H, Gupta G, et al. Microstructure-property relationships of 420 stainless steel fabricated by laser-powder bed fusion. Powder Technol. 2019;343:738–746.
- Nath SD, Clinning E, Gupta G, et al. Effects of Nb and Mo on the microstructure and properties of 420 stainless steel processed by laser-powder bed fusion. Addit Manuf. 2019;28:682–691.
- Saeidi K, Zapata DL, Lofaj F, et al. Ultra-high strength martensitic 420 stainless steel with high ductility. Addit Manuf. 2019;29:100803.