Magnetic performance and microstructure characterisation of powder metallurgy Fe–6.5 wt-% Si high-silicon steel

References

• Littmann MF. Iron and silicon-iron alloys. IEEE T Magn. 1971;7:48–60.
   Google Scholar
• Arai KI, Tsuya N, Ohmori K, et al. Rapidly quenched ribbon-form silicon-iron alloy with high silicon concentration. J Magn Magn Mater. 1980;15-18:1425–1426.
   Web of Science ®Google Scholar
• Krings A, Boglietti A, Cavagnino A, et al. Soft magnetic material status and trends in electric machines. IEEE T Ind Electron. 2017;64:2405–2414.
   Web of Science ®Google Scholar
• Ruiz D, Yanez TR, Cuello GJ, et al. Order in Fe-Si alloys: a neutron diffraction study. Phys B: Condens Matter. 2006;385-386:578–580.
   Google Scholar
• Zhang ZH, Wang WP, Fu HD, et al. Effect of quench cooling rate on residual stress, microstructure and mechanical property of an Fe-6.5 Si alloy. Mat Sci Eng A. 2011;530:519–524.
   Web of Science ®Google Scholar
• Fang XS, Lin JP, Liang YF, et al. Effect of annealing temperature on soft magnetic properties of cold rolled 0.30mm thick Fe-6.5wt. % Si foils. J Magn. 2011;16:177–180.
   Web of Science ®Google Scholar
• Takada Y, Abe M, Masuda S, et al. Commercial scale production of Fe-6.5wt. % Si sheet and its magnetic properties. J Appl Phys. 1988;64:5367–5369.
   Web of Science ®Google Scholar
• Masuda S, Fujita F, Murakami T, et al. Warm rolling method for high silicon steel strips. United States patent US 4938049 A. 1990.
   Google Scholar
• Jiao HT, Xu YB, Zhao LZ, et al. Microstructural evolution and magnetic properties in strip cast non-oriented silicon steel produced by warm rolling. Mater Charact. 2019;156:109876.
   Web of Science ®Google Scholar
• Zhang FQ, Luo ZH. Analysis of processing equipment for near-net shape manufacturing technology of materials. Adv Mater Res. 2012;572:390–399.
   Google Scholar
• Liu HT, Liu ZY, Sun Y, et al. Development of λ-fiber recrystallization texture and magnetic property in Fe-6.5wt % Si thin sheet produced by strip casting and warm rolling method. Mater Lett. 2013;91:150–153.
   Web of Science ®Google Scholar
• Tsuya N, Arai KI. Magnetostriction of ribbon-form amorphous and crystalline ferromagnetic alloys. J Appl Phys. 1979;50:1658–1663.
   Web of Science ®Google Scholar
• Ouyang G, Jensen B, Wei T, et al. Effect of wheel speed on magnetic and mechanical properties of melt spun Fe-6.5 wt.% Si high silicon steel. AIP Adv. 2018;8:056111.
   Google Scholar
• Ouyang G, Chen X, Liang Y, et al. Review of Fe-6.5wt % Si high silicon steel -A promising soft magnetic material for sub-kHz application. J Magn Magn Mater. 2019;481:234–250.
   Web of Science ®Google Scholar
• Yamaji T, Abe M, Takada Y, et al. Magnetic properties and workability of 6.5% silicon steel sheet manufactured in continuous CVD siliconizing line. J Magn Magn Mater. 1994;133:187–189.
   Web of Science ®Google Scholar
• Klam C, Millet JP, Mazille H, et al. Chemical vapour deposition of silicon onto iron: influence of silicon vapour phase source on the composition and nature of the coating. J Mater Sci. 1991;26:4945–4952.
   Web of Science ®Google Scholar
• Okada K, Yamaji T, Kasai K. Basic investigation of CVD method for manufacturing 6.5% Si steel sheet. ISIJ Int. 1996;36:706–713.
   Web of Science ®Google Scholar
• Sakai T, Suzuki Y, Shimosato S, et al. Magnetic properties of Fe-Si alloys by powder metallurgy. IEEE T Magn. 1977;13:1445–1447.
   Web of Science ®Google Scholar
• Kusaka K, Imaoka T, Kondo T. Relationships between magnetic properties and Si-contents/sintering conditions of Fe-Si type magnetic alloys. J Jpn Soc Powder Powder Metall. 2000;47:195–202.
   Google Scholar
• Yuan WJ, Li JG, Shen Q, et al. A study on magnetic properties of high Si steel obtained through powder rolling processing. J Magn Magn Mater. 2008;320:76–80.
   Web of Science ®Google Scholar
• Tangudu J, Ouyang G, Cui J. Trade studies for a manganese bismuth based surface permanent magnet machine. In: IEEE Transportation Electrification Conference and Expo; 2018. p. 600–605.
   Google Scholar
• Narita K, Teshima N, Mori Y, et al. Recent researches on high silicon-iron alloys. IEEE T Magn. 1981;17:2857–2862.
   Web of Science ®Google Scholar
• Narita K, Enokizono M. Effect of nickel and manganese addition on ductility and magnetic properties of 6.5% silicon-iron alloy. IEEE T Magn. 1978;14:258–262.
   Web of Science ®Google Scholar
• Kim KN, Pan LM, Lin JP, et al. The effect of boron content on the processing for Fe–6.5wt % Si electrical steel sheets. J Magn Magn Mater. 2004;277:331–336.
   Web of Science ®Google Scholar
• Glezer AM, Maleeva IV, Zakharov AI. Influence of alloy elements on the plasticity of high-silicon iron. Met Sci Heat Treat+. 1985;27:908–912.
   Web of Science ®Google Scholar
• Shimanaka H, Ito Y, Matsumara K, et al. Recent development of non-oriented electrical steel sheets. J Magn Magn Mater. 1982;26:57–64.
   Web of Science ®Google Scholar
• Narita K, Enokizono M. Effect of ordering on magnetic properties of 6.5-percent silicon-iron alloy. IEEE T Magn. 1979;15:911–915.
   Web of Science ®Google Scholar
• Li CS, Yang CL, Cai GJ, et al. Ordered phases and microhardness of Fe-6.5 % Si steel sheet after hot rolling and annealing. Mat Sci Eng A. 2016;650:84–92.
   Web of Science ®Google Scholar
• Jing Q, Ping Y, Mao W, et al. Effect of texture and grain size on the magnetic flux density and core loss of cold-rolled high silicon steel sheets. J Magn Magn Mater. 2015;393:537–543.
   Web of Science ®Google Scholar
• Haiji H, Okada K, Hiratani T, et al. Magnetic properties and workability of 6.5% Si steel sheet. J Magn Magn Mater. 1996;160:109–114.
   Web of Science ®Google Scholar
• Li R, Shen Q, Zhang L, et al. Magnetic properties of high silicon iron sheet fabricated by direct powder rolling. J Magn Magn Mater. 2004;281:135–139.
   Web of Science ®Google Scholar