References
- Salak A. Ferrous powder metallurgy. Riecansky V, editor. Cambridge: Cambridge International Science; 1995.
- Oro R, Campos M, Gierl-Mayer C, et al. New alloying systems for sintered steels: critical aspects of sintering behavior. Metall Mater Trans A. 2015;46(3):1349–1359.
- Hryha E, Dudrova E, Nyborg L. Critical aspects of alloying of sintered steels with manganese. Metall Mater Trans A. 2010;41(11):2880–2897.
- Sainz S, Veiga A, Castro FR. Sintered Mn-containing steels for high-performance applications. Int J Powder Metall. 2016;52(2):47–55.
- German RM, Suri P, Park SJ. Review: liquid phase sintering. J Mater Sci. 2009;44(1):1–39.
- Liu J, Cardamone A, Potter T, et al. Liquid phase sintering of iron–carbon alloys with boron additions. Powder Metall. 2000;43(1):57–61.
- Xiu Z, Salwén A, Qin X, et al. Sintering behaviour of iron-molybdenum steels with the addition of Fe-B-C master alloy powders. Powder Metall. 2003;46(2):171–174.
- Wu M-W. The influences of carbon and molybdenum on the progress of liquid phase sintering and the microstructure of boron-containing powder metallurgy steel. Metall Mater Trans A. 2015;46(1):467–475.
- Danninger H, Vassileva V, Gierl-Mayer C. Embrittling components in sintered steels: comparison of phosphorus and boron. Powder Metall Prog. 2017;17(1):47–64.
- Sundaram MV, Surreddi KB, Hryha E, et al. Enhanced densification of PM steels by liquid phase sintering with boron-containing master alloy. Metall Mater Trans A. 2018;49(1):255–263.
- Gierl-Mayer C, Zbiral J, Danninger H. Enhanced sintering of PM steels by addition of Fe-Ni-B masteralloy. Euro PM2014; 2014 Sep 21–24; Salzburg, Austria. EPMA; 2014.
- Veiga A, Bilbao C, Sainz S, et al. Controlled shrinkage of low alloy PM steels during LPS. In: Bingert SR, Luk SH, editors. International Conference on Powder Metallurgy & Particulate Materials; 2015 May 17–20; San Diego, CA. MPIF; 2015.
- Karwan-Baczewska J. Processing and properties of distaloy Sa sintered alloys with boron and carbon. Arch Metall Mater. 2015;60(1):41–45.
- Marucci M, Lawley A, Causton R, et al. Effect of small additions of boron on the mechanical properties and hardenability of sintered P/M steels. Powder Metall. 2011;46(2):171–174.
- Gélinas S, Rousseau J-N, Blais C. Solidification structures in low-alloyed powder metallurgy steels obtained through permanent liquid phase sintering using a master alloy containing boron. Mater Perform Charact. 2020;9(4):452–469.
- Skałoń M, Hebda M, Sulikowska K, et al. Influence of FeNiMnSiB master alloy on the structure and mechanical properties of P/M AISI 316L. Mater Design. 2016;108:462–469.
- Castro F, Sainz S, Veiga A, et al. The master alloy concept and its consequences. In: Donaldson I, Mares NT, editors. International Conference on Powder Metallurgy & Particulate Materials; 2012 Jun 10–13; Nashville, TN. MPIF; 2012.
- German RM. Sintering: from empirical observations to scientific principles. Oxford (UK): Butterworth-Heinemann Elsevier; 2014.
- MPIF. Standard test methods for metal powders & powder metallurgy (PM) products. Princeton (NJ): Metal Powder Industries Federation.
- Sarasola M, Tojal C, Castro F. Study of boron behaviour during sintering of FeMo/B/C alloys to near full density. Euro PM2004; 2004 Oct 17–21; Vienna. EPMA; 2004.
- Sarasola M, Gómez-Acebo T, Castro F. Liquid generation during sintering of Fe–3.5%Mo powder compacts with elemental boron additions. Acta Mater. 2004;52(15):4615–4622.
- Sarasola M, Gómez-Acebo T, Castro F. Microstructural development during liquid phase sintering of Fe and Fe–Mo alloys containing elemental boron additions. Powder Metall. 2005;48(1):59–67.
- Gélinas S, Laramée G, Blais C. Artificial intelligence applied to the development and characterization of PM components. Int J Powder Metall. 2021;57(4):37–52.
- Castro F, Sainz S, Martinez V, et al. Sinterability, hardenabilility and mechanical properties of Mn-containing PM steels through the Use of a specially designed Fe-Mn-C master alloy. In: Gasbarre WR, von Arx JW, editors. International Conference on Powder Metallurgy & Particulate Materials; 2006 Jun 18–21; San Diego, CA. MPIF; 2006.
- Rogl P. Boron – carbon – iron. In: Effenberg G, Ilyenko S, editors. Landolt-Börnstein – group IV physical chemistry 11D1 – iron systems, part 1. Berlin: Springer; 2008. p. 349–378.
- Momeni M, Gierl C, Danninger H, et al. Thermoanalytical sintering studies of Fe–C admixed with ferroboron performed in different atmospheres. Powder Metall. 2012;55(1):54–64.
- Wu M-W, Fan Y-C, Huang H-Y, et al. Liquid phase sintering of boron-containing powder metallurgy steel with chromium and carbon. Metall Mater Trans A. 2015;46(11):5285–5295.
- Molinari A, Gialanella S, Straffelini G, et al. Dilatometry study of the sintering behavior of boron-alloyed Fe-1.5 pct Mo powder. Metall Mater Trans A. 2000;31(6):1497–1506.