Microstructure evolution and mechanical property of powder metallurgy Ti6Al4V alloy with high oxygen concentrations

References

• Sun B, Li S, Imai H, et al. Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods. Mater Sci Eng A. 2013;563:95–100.
   Web of Science ®Google Scholar
• Maseko SW, Popoola API, Fayomi OSI. Characterization of ceramic reinforced titanium matrix composites fabricated by spark plasma sintering for anti-ballistic applications. Def Technol. 2018;14:408–411.
   Web of Science ®Google Scholar
• Niu HZ, Zhang HR, Sun QQ, et al. Breaking through the strength-ductility trade-off dilemma in powder metallurgy Ti-6Al-4V titanium alloy. Mater Sci Eng A. 2019;754:361–369.
   Web of Science ®Google Scholar
• Hryha E, Shvab R, Bram M, et al. Surface chemical state of Ti powders and its alloys: effect of storage conditions and alloy composition. Appl Surf Sci. 2016;388:294–303.
   Web of Science ®Google Scholar
• Fang ZZ, Paramore JD, Sun P, et al. Powder metallurgy of titanium–past, present, and future. Int Mater Rev. 2018;63:1–53.
   Web of Science ®Google Scholar
• Kumar P, Chandran KSR. Strength-ductility property maps of powder metallurgy (PM) Ti-6Al-4V alloy: a critical review of processing-structure-property relationships. Metall Mater Trans A. 2017;48:2301–2319.
   Google Scholar
• Duz V, Matviychuk M, Klevtsov A, et al. Industrial application of titanium hydride powder. Met Powder Rep. 2017;72:30–38.
   Google Scholar
• Paramore JD, Fang ZZ, Sun P, et al. A powder metallurgy method for manufacturing Ti-6Al-4V with wrought-like microstructures and mechanical properties via hydrogen sintering and phase transformation (HSPT). Scripta Mater. 2015;107:103–106.
   Web of Science ®Google Scholar
• Yan M, Dargusch MS, Ebel T, et al. A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti-6Al-4V and their impacts on ductility. Acta Mater. 2014;68:196–206.
   Web of Science ®Google Scholar
• Okabe TH, Zheng C, Taninouchi Y. Thermodynamic considerations of direct oxygen removal from titanium by utilizing the deoxidation capability of rare earth metals. Metall Mater Trans B. 2018;49:1056–1066.
   Web of Science ®Google Scholar
• Yang YF, Li SF, Qian M, et al. Enabling the development of ductile powder metallurgy titanium alloys by a unique scavenger of oxygen and chlorine. J Alloy Compd. 2018;764:467–475.
   Web of Science ®Google Scholar
• Yan M, Liu Y, Liu YB, et al. Simultaneous gettering of oxygen and chlorine and homogenization of the β phase by rare earth hydride additions to a powder metallurgy Ti-2.25Mo-1.5Fe alloy. Scripta Mater. 2012;67:491–494.
   Web of Science ®Google Scholar
• Baril E, Lefebvre LP, Thomas Y. Interstitial elements in titanium powder metallurgy: sources and control. Powder Metall. 2011;54:183–187.
   Web of Science ®Google Scholar
• Chen B, Shen J, Ye X, et al. Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration. J Mater Res. 2017;32:3769–3776.
   Google Scholar
• Soba R, Tanabe Y, Yonezawa T, et al. Microstructures and mechanical properties of shape memory alloy using pre-mixed tini powders with TiO2 particles. Mater Trans. 2018;59:117–122.
   Web of Science ®Google Scholar
• Ye XX, Chen B, Shen JH, et al. Microstructure and strengthening mechanism of ultrastrong and ductile Ti-xSn alloy processed by powder metallurgy. J Alloy Compd. 2017;709:381–393.
   Web of Science ®Google Scholar
• Tabrizi S G, Babakhani A, Sajjadi SA, et al. Microstructural aspects of in-situ TiB reinforced Ti-6Al-4V composite processed by spark plasma sintering. T Nonferr Metal Soc. 2015;25:1460–1467.
   Web of Science ®Google Scholar
• Obadele BA, Ige OO, Olubambi PA. Fabrication and characterization of titanium-nickel-zirconia matrix composites prepared by spark plasma sintering. J Alloy Compd. 2017;710:825–830.
   Web of Science ®Google Scholar
• Murray JL. The Ti-Zr (titanium-zirconium) system. Bull Alloy Phase Diagrams. 1981;2:197–201.
   Google Scholar
• Xia C, Zhang Z, Feng Z, et al. Effect of zirconium content on the microstructure and corrosion behavior of Ti-6Al-4V-xZr alloys. Corros Sci. 2016;112:687–695.
   Web of Science ®Google Scholar
• Correa DRN, Vicente FB, Donato TAG, et al. The effect of the solute on the structure, selected mechanical properties, and biocompatibility of Ti-Zr system alloys for dental applications. Mater Sci Eng C. 2014;34:354–359.
   PubMed Web of Science ®Google Scholar
• Han MK, Hwang MJ, Yang MS, et al. Effect of zirconium content on the microstructure, physical properties and corrosion behavior of Ti alloys. Mater Sci Eng A. 2014;616:268–274.
   Web of Science ®Google Scholar
• Kondoh K, Fukuo M, Kariya S, et al. Quantitative strengthening evaluation of powder metallurgy Ti-Zr binary alloys with high strength and ductility. J Alloy Compd. 2021;852:156954.
   Web of Science ®Google Scholar
• Jiang S, An Q, Cui X, et al. Fabrication and mechanical properties of the titanium matrix composites based on Ti6Al4V-ZrB2-(Si) system. Mater Sci Eng A. 2021;819:141488.
   Web of Science ®Google Scholar
• Liang S, Zhou Y, Yin L. Strengthening/weakening action of Zr on stabilizers of Ti alloys and its effect on phase transition. J Mater Eng Perform. 2021;30:876–884.
   Web of Science ®Google Scholar
• Zhou Y, Yang F, Chen C, et al. Mechanical property enhancement of high-plasticity powder metallurgy titanium with a high oxygen concentration. J Alloy Compd. 2021;885:161006.
   Web of Science ®Google Scholar
• Ivasishin OM, Savvakin DG, Gumenyak MM, et al. Role of surface contamination in titanium PM. Key Eng Mater. 2012;520:121–132.
   Google Scholar
• Zhang C, Yang F, Chen C, et al. The microstructure and mechanical properties of extra low interstitials (ELI) Ti-6Al-4V alloys manufactured from hydride–dehydride (HDH) powder. J Alloy Compd. 2021;873:159757.
   Web of Science ®Google Scholar
• Burgers WG. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium. Physica. 1934;1:561–586.
   Google Scholar
• Atapour M, Pilchak A, Frankel GS, et al. Corrosion behavior of Ti-6Al-4V with different thermomechanical treatments and microstructures. Corrosion. 2010;66:065004–065004–9.
   Web of Science ®Google Scholar
• Huang LJ, Geng L, Xu HY, et al. In situ TiC particles reinforced Ti6Al4V matrix composite with a network reinforcement architecture. Mater Sci Eng A. 2011;528:2859–2862.
   Web of Science ®Google Scholar
• Fukuo M, Kariya S, Umeda J, et al. Strengthening mechanisms of powder metallurgy extruded CP titanium materials with zirconium and oxygen solid solution via decomposition of ZrO2 additives in sintering. Mater Trans. 2019;60:1881–1889.
   Web of Science ®Google Scholar
• Dercz G, Matula I, Gurdziel W, et al. Microstructure evolution of Ti/ZrO2 and Ti/Al2O3 composites prepared by powder metallurgy method. Arch Matall Mater. 2019;64:443–450.
   Web of Science ®Google Scholar
• Kamiyama K, Kariya S, Fukuo M, et al. Ductility improvement mechanism of Ti-6Al-4V + O sintered material. Mater Trans. 2020;61:430–437.
   Web of Science ®Google Scholar
• Nayak SK, Hung CJ, Sharma V, et al. Insight into point defects and impurities in titanium from first principles. NPJ Comput Mater. 2018;4:1–10.
   Web of Science ®Google Scholar
• Ho W, Chen W, Wu S, et al. Structure, mechanical properties, and grindability of dental Ti-Zr alloys. J Mater Sci Mater Med. 2008;19:3179–3186.
   PubMed Web of Science ®Google Scholar
• Alhazaa A, Hezam M, Shar MA, et al. Effect of sintering temperature on the microstructure and mechanical properties of the Ti-2.5Zr alloy. Mater Res Express. 2021;8:016522.
   Google Scholar
• Shen J, Chen B, Umeda J, et al. Microstructure and mechanical properties of CP-Ti fabricated via powder metallurgy with non-uniformly dispersed impurity solutes. Mater Sci Eng A. 2018;716:1–10.
   Web of Science ®Google Scholar