Preparation of 24CrNiMoY alloy steel with high strength and toughness by selective laser melting

Reference

• Read N, Wang W, Essa K, et al. Selective laser melting of AlSi10Mg alloy: process optimization and mechanical properties development. Mater Des. 2015;65:417–424.
   Web of Science ®Google Scholar
• Li XP, Roberts M, Liu YJ, et al. Effect of substrate temperature on the interface bond between support and substrate during selective laser melting of Al–Ni–Y–Co–La metallic glass. Mater Des. 2015;65:1–6.
   Web of Science ®Google Scholar
• LeBrun T, Nakamoto T, Horikawa K, et al. Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17-4 PH stainless steel. Mater Des. 2015;81:44–53.
   Web of Science ®Google Scholar
• Sander J, Hufenbach J, Bleckmann M, et al. Selective laser melting of ultrahigh-strength TRIP steel: processing, microstructure, and properties. J Mater Sci. 2017;52:4944–4956.
   Web of Science ®Google Scholar
• Yan JJ, Zheng DL, Li HX, et al. Selective laser melting of H13: microstructure and residual stress. J Mater Sci. 2017;52:12476–12485.
   Web of Science ®Google Scholar
• Wei MW, Chen SY, Xi LY, et al. Selective laser melting of 24CrNiMo steel for brake disc: fabrication efficiency, microstructure evolution, and properties. Opt Laser Technol. 2018;107:99–109.
   Web of Science ®Google Scholar
• Cao L, Chen SY, Wei MW, et al. Effect of laser energy density on defects behavior of direct laser depositing 24CrNiMo alloy steel. Opt Laser Technol. 2019;111:541–553.
   Web of Science ®Google Scholar
• Wei MW, Chen SY, Sun M, et al. Preparation of TA15 powder reinforced 45CrNiMoY alloy steel with high mechanical property by prelaid laser cladding technology. Mater Charact. 2020;160:110097.
   Web of Science ®Google Scholar
• Han YR, Zhang CH, Cui X, et al. The formability and microstructure evolution of 24CrNiMo alloy steel fabricated by selective laser melting. Vacuum. 2020;175:109297.
   Web of Science ®Google Scholar
• Liu YD, Zhang M, Shi WT, et al. Study on performance optimization of 316 L stainless steel parts by high-efficiency selective laser melting. Opt Laser Technol. 2021;138:106872.
   Web of Science ®Google Scholar
• Wang Q, Zhang ZH, Tong X, et al. Effects of process parameters on the microstructure and mechanical properties of 24CrNiMo steel fabricated by selective laser melting. Opt Laser Technol. 2020;128:106262.
   Web of Science ®Google Scholar
• Larimian T, Kannan M, Grzesiak D, et al. Effect of energy density and scanning strategy on densification, microstructure and mechanical properties of 316 L stainless steel processed via selective laser melting. Mater Sci Eng A. 2020;770:138455.
   Web of Science ®Google Scholar
• Liverani E, Toschi S, Ceschini L, et al. Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316 L austenitic stainless steel. J Mater Process Technol. 2017;249:255–263.
   Web of Science ®Google Scholar
• Dong DD, Chang C, Wang H, et al. Selective laser melting (SLM) of CX stainless steel: theoretical calculation, process optimization and strengthening mec hanism. J Mater Sci Technol. 2021;73:151–164.
   Web of Science ®Google Scholar
• Tang X, Zhang S, Zhang CH, et al. Optimization of laser energy density and scanning strategy on the forming quality of 24CrNiMo low alloy steel manufactured by SLM. Mater Charact. 2020;170:110718.
   Web of Science ®Google Scholar
• Rombouts M, Kruth JP, Froyen L, et al. Fundamentals of selective laser melting of alloyed steel powders. CIRP Ann. 2006;55:187–192.
   Web of Science ®Google Scholar
• Massimo P, Bandar A, Matteo B, et al. Effects of building direction and defect sensitivity on the fatigue behavior of additively manufactured H13 tool steel. Theor Appl Fract Mech. 2020;108:0167–8442.
   Web of Science ®Google Scholar
• Tsopanos S, Mines RAW, McKown S, et al. The influence of processing parameters on the mechanical properties of selectively laser melted stainless steel microlattice structures. J Manuf Sci Eng. 2010;132(4):041011.
   Web of Science ®Google Scholar
• Qiu C, Kindi MA, Aladawi AS, et al. A comprehensive study on microstructure and tensile behaviour of a selectively laser melted stainless steel. Sci Rep. 2018;8(1):7785.
   PubMedGoogle Scholar
• AlMangour B, Yang JM. Understanding the deformation behavior of 17-4 precipitate hardenable stainless steel produced by direct metal laser sintering using micropillar compression and TEM. Int J Adv Manuf Technol. 2017;90(1–4):119–126.
   Web of Science ®Google Scholar
• Starr TL, Rafi K, Stucker B, et al. Controlling phase composition in selective laser melted stainless steels. 2012 International Solid Freeform Fabrication Symposium. University of Texas at Austin, 2012.
   Google Scholar
• Sun M, Chen SY, Wei MW, et al. Microstructure and properties of high power-SLM 24CrNiMoY alloy steel at different laser energy density and tempering temperature. Powder Metall. 2021;64:23–34.
   Web of Science ®Google Scholar
• Zhu HH, Lu L, Fuh JYH. Influence of binder’s liquid volume fraction on direct laser sintering of metallic powder. Mater Sci Eng A. 2004;371:170–177.
   Web of Science ®Google Scholar
• Gu DD, Shen YF. Effects of processing parameters on consolidation and microstructure of W-Cu components by DMLS. J Alloys Compd. 2009;473:107–115.
   Web of Science ®Google Scholar
• Simchi A, Pohl H. Effects of laser sintering processing parameters on the microstructure and densification of iron powder. Mater Sci Eng A. 2003;359:119–128.
   Web of Science ®Google Scholar
• Wang D, Song C, Yang Y, et al. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316 L stainless steel parts. Mater Des. 2016;100:291–299.
   Web of Science ®Google Scholar