References
- Cotton JD, Briggs RD, Boyer RR, et al. State of the art in beta titanium alloys for airframe applications. JOM. 2015;67:1281–1303. doi:10.1007/s11837-015-1442-4
- Boyer RR, Briggs RD. The use of β titanium alloys in the aerospace industry. J Mater Eng Perform 2013;22:2916–2920. doi:10.1007/s11665-013-0728-3
- Zhao Q, Sun Q, Xin S, et al. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process. Mater Sci Eng A. 2022;845:143260, doi:10.1016/J.MSEA.2022.143260
- Qin D, Zhao F, Li Y. The conflicts between strength and ductility of bimodal Ti-5553 alloy with fine equiaxial prior β grains. Mater Sci Eng A. 2022;841:143074, doi:10.1016/j.msea.2022.143074
- Kar SK, Ghosh A, Fulzele N, et al. Quantitative microstructural characterization of a near beta Ti alloy, Ti-5553 under different processing conditions. Mater Charact 2013;81:37–48. doi:10.1016/j.matchar.2013.03.016
- Opini VC, Salvador CAF, Campo KN, et al. Α phase precipitation and mechanical properties of Nb-modified Ti-5553 alloy. Mater Sci Eng A. 2016;670:112–121. doi:10.1016/j.msea.2016.06.001
- Campo KN, Andrade DR, Opini VC, et al. On the hardenability of Nb-modified metastable beta Ti-5553 alloy. J Alloys Compd 2016;667:211–218. doi:10.1016/j.jallcom.2016.01.142
- Zhao Q, Yang F, Torrens R, et al. PM versus IM Ti-5Al-5V-5Mo-3Cr alloy in mechanical properties and fracture behaviour. Mater Res. 2019;22; doi:10.1590/1980-5373-MR-2018-0739
- Zhao Q, Yang F, Torrens R, et al. Allotropic phase transformation and high-temperature tensile deformation behaviour of powder metallurgy Ti-5553 alloy. Int J Refract Met Hard Mater 2020;90:105235. doi:10.1016/j.ijrmhm.2020.105235
- Yang F, Gabbitas B, Raynova S, et al. Preparation of Ti-5553 alloy by different extrusion processes from elemental powder mixtures. Key Eng Mater. 2018;770:31–38. doi:10.4028/www.scientific.net/KEM.770.31
- Zyguła K, Wojtaszek M. The design of Ti-5Al-5Mo-5V-3Cr elemental powders mixture processing. Arch Metall Mater 2020;65:283–289. doi:10.24425/amm.2020.131728
- Raynova S, Imam MA, Yang F, et al. Hybrid microwave sintering of blended elemental Ti alloys. J Manuf Process 2019;39:52–57. doi:10.1016/j.jmapro.2019.02.002
- Soyama J, Oehring M, Limberg W, et al. Sintering behaviour of Ti-45Al-5Nb-0.2B-0.2C alloy modifications by additions of elemental titanium and aluminium. Powder Metall 2015;58:369–375. doi:10.1179/1743290115Y.0000000017
- ASTM International. ASTM B962-17 - standard test methods for density of compacted or Sintered powder metallurgy (PM) products using Archimedes’ principle. 2017 [cited 2022 Jan 26]. Available from: https://www.astm.org/b0962-17.html.
- Steedman G, Corbin SF, O’Flynn J. Distinguishing the influence of aluminium and vanadium additions on microstructural evolution and densification behaviour during the sintering of Ti6Al, Ti4V and Ti6Al4V. Powder Metall 2018;61:301–312. doi:10.1080/00325899.2018.1501946
- Bolzoni L, Ruiz-Navas EM, Gordo E. Quantifying the properties of low-cost powder metallurgy titanium alloys. Mater Sci Eng A. 2017;687:47–53. doi:10.1016/j.msea.2017.01.049
- Fanning JC. Properties of TIMETAL 555 (Ti-5Al-5Mo-5V-3Cr-0.6Fe). J Mater Eng Perform 2005;14:788–791. doi:10.1361/105994905X75628
- Markovsky PE, Bondarchuk VI, Herasymchuk OM. Influence of grain size, aging conditions and tension rate on the mechanical behavior of titanium low-cost metastable beta-alloy in thermally hardened condition. Mater Sci Eng A. 2015;645:150–162. doi:10.1016/j.msea.2015.08.009