References
- Kim SH, Kim H, Kim NJ. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility. Nature. 2015;518:77–79. doi:10.1038/nature14144
- Rahnama A, Kotadia H, Sridhar S. Effect of Ni alloying on the microstructural evolution and mechanical properties of two duplex light-weight steels during different annealing temperatures: experiment and phase-field simulation. Acta Mater. 2017;132:627–643. doi:10.1016/j.actamat.2017.03.043
- Gutierrez-Urrutia I, Raabe D. Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels. Scr Mater. 2013;68:343–347. doi:10.1016/j.scriptamat.2012.08.038
- Wu ZQ, Ding H, An XH, et al. Influence of Al content on the strain-hardening behavior of aged low density Fe-Mn-Al-C steels with high Al content. Mater Sci Eng A. 2015;639:187–191. doi:10.1016/j.msea.2015.05.002
- Chen PC, Chao CG, Liu TF. A novel high-strength, high-ductility and high-corrosion-resistance FeAlMnC low-density alloy. Scr Mater. 2013;68:380–383. doi:10.1016/j.scriptamat.2012.10.034
- Yao MJ, Welsch E, Ponge D, et al. Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel. Acta Mater. 2017;140:258–273. doi:10.1016/j.actamat.2017.08.049
- Kim H, Suh DW, Kim NJ. Fe-Al-Mn-C lightweight structural alloys: A review on the microstructures and mechanical properties. Sci Technol Adv Mater. 2013;14:014205. doi:10.1088/1468-6996/14/1/014205
- Park G, Nam CH, Zargaran A, et al. Effect of B2 morphology on the mechanical properties of B2-strengthened lightweight steels. Scr Mater. 2019;165:68–72. doi:10.1016/j.scriptamat.2019.02.013
- Hwang JH, Trang TTT, Lee O, et al. Improvement of strength – ductility balance of B2-strengthened lightweight steel. Acta Mater. 2020;191:1–12. doi:10.1016/j.actamat.2020.03.022
- Sutou Y, Kamiya N, Umino R, et al. High-strength Fe-2OMn-Al-C-based alloys with low density. ISIJ Int. 2010;50:893–899. doi:10.2355/isijinternational.50.893
- Fayazfar H, Salarian M, Rogalsky A, et al. A critical review of powder-based additive manufacturing of ferrous alloys: process parameters, microstructure and mechanical properties. Mater Des. 2018;144:98–128. doi:10.1016/j.matdes.2018.02.018
- Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting – microstructural and mechanical properties. Mater Des. 2017;133:136–142. doi:10.1016/j.matdes.2017.07.046
- Saeidi K, Gao X, Lofaj F, et al. Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting. J Alloys Compd. 2015;633:463–469. doi:10.1016/j.jallcom.2015.01.249
- Rafi HK, Pal D, Patil N, et al. Microstructure and mechanical behavior of 17-4 precipitation hardenable steel processed by selective laser melting. J Mater Eng Perform. 2014;23:4421–4428. doi:10.1007/s11665-014-1226-y
- Bajaj P, Hariharan A, Kini A, et al. Steels in additive manufacturing: a review of their microstructure and properties. Mater Sci Eng A. 2020;772:138633. doi:10.1016/j.msea.2019.138633
- Kempen K, Vrancken B, Buls S, et al. Selective laser melting of crack-free high density M2 high speed steel parts by baseplate preheating. J Manuf Sci Eng Trans ASME. 2014;136:1–6. doi:10.1115/1.4028513
- Sun Y, Hebert RJ, Aindow M. Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel. Mater Des. 2018;156:429–440. doi:10.1016/j.matdes.2018.07.015
- Frazier WE. Metal additive manufacturing: a review. J Mater Eng Perform. 2014;23:1917–1928. doi:10.1007/s11665-014-0958-z
- DebRoy T, Wei HL, Zuback JS, et al. Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci. 2018;92:112–224. doi:10.1016/j.pmatsci.2017.10.001
- Davidson K, Singamneni S. Selective laser melting of duplex stainless steel powders: an investigation. Mater Manuf Process. 2016;31:1543–1555. doi:10.1080/10426914.2015.1090605
- Casati R, Lemke J, Tuissi A, et al. Aging behaviour and mechanical performance of 18-Ni 300 steel processed by selective laser melting. Metals (Basel). 2016;6:218, doi:10.3390/met6090218
- Gorsse S, Hutchinson C, Gouné M, et al. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys. Sci Technol Adv Mater. 2017;18:584–610. doi:10.1080/14686996.2017.1361305
- Acselrad O, De Souza AR, Kalashnikov IS, et al. A first evaluation of the abrasive wear of an austenitic FeMnAlC steel. Wear. 2004;257:999–1005. doi:10.1016/j.wear.2004.07.004
- Guang Peng S, Bo Song R, Sun T, et al. Wear behavior and hardening mechanism of novel lightweight Fe–25.1Mn–6.6Al–1.3C steel under impact abrasion conditions. Tribol Lett. 2016;64:1–10. doi:10.1007/s11249-016-0751-2
- Karakulak E, Yamanoǧlu R, Erten U, et al. Investigation of corrosion and mechanical properties of Al-Cu-SiC-xNi composite alloys. Mater Des. 2014;59:33–37. doi:10.1016/j.matdes.2014.02.039