References
- Cavallaro, S., Colligiani, A., & Cum, G. (1992). Oxidative chemical polymerization of pyrrole. Journal of Thermal Analysis, 38, 2649–2655.10.1007/BF01979741
- Cosnier, S., & Innocent, C. (1992). A novel biosensor elaboration by electropolymerization of an adsorbed amphiphilic pyrrole-tyrosinase enzyme layer. Journal of Electroanalytical Chemistry, 328, 361–366.10.1016/0022-0728(92)80195-A
- Das, D., Sen, K., & Maity, S. (2013). Studies on electro-conductive fabrics prepared by in-situ chemical polymerization of mixtures of pyrrole and thiophene. Fibers and Polymers, 14, 345–351.10.1007/s12221-013-0345-7
- Das, D., Sen, K., Saraogi, A., & Maiti, S. (2010). Experimental studies on electro-conductive fabric prepared by in situ polymerization of thiophene onto polyester. Journal of Applied Polymer Science, 116, 3555–3561.
- Diaz, A. F., & Bargon, J. (1986). Handbook of conducting polymers. New York, NY: Marcel Dekker.
- Frank, A. J., & Honda, K. (1985). Polymer-modified electrodes, catalysis and water-splitting reactions. Journal of Photochemistry, 29, 195–204.10.1016/0047-2670(85)87071-4
- Freund, M. S., & Lewis, N. S. (1995). A chemically diverse conducting polymer-based ‘electronic nose’. Proceedings of the National Academy of Sciences, 92, 2652–2656.10.1073/pnas.92.7.2652
- Gardner, J. W., & Bartlett, P. N. (1993). Design of conducting polymer gas sensors: Modelling and experiment. Synthetic Metals, 57, 3665–3670.10.1016/0379-6779(93)90494-H
- Garfias-García, E., Romero-Romo, M., Ramírez-Silva, M. T., Morales, J., & Palomar-Pardavé, M. (2008). Mechanism and kinetics of the electrochemical formation of polypyrrole under forced convection conditions. Journal of Electroanalytical Chemistry, 613, 67–79.10.1016/j.jelechem.2007.10.013
- Gill, M. T., Chapman, S. E., DeArmitt, C. L., Baines, F. L., Dadswell, C. M., Stamper, J. G., … Armes, S. P. (1998). A study of the kinetics of polymerization of aniline using proton NMR spectroscopy. Synthetic Metals, 93, 227–233.10.1016/S0379-6779(98)00016-2
- Guo, B., Glavas, L., & Albertsson, A.-C. (2013). Biodegradable and electrically conducting polymers for biomedical applications. Progress in Polymer Science, 38, 1263–1286.10.1016/j.progpolymsci.2013.06.003
- Kakuda, S., Momma, T., Osaka, T., Appetecchi, G. B., & Scrosati, B. (1995). Ambient-temperature, rechargeable, all-solid lithium/polypyrrole polymer battery. Journal of the Electrochemical Society, 142, L1–L2.10.1149/1.2043977
- Koshida, N., Mizuno, H., Koyama, H., & Collins, G. J. (1994). Visible electroluminescence from porous silicon diodes with immersed conducting polymer contacts. Japan. Journal of Applied Physics Part, 2(34), 92–94.
- Kricheldorf, H. R., Nuyken, O., & Swift, G. (2005). Handbook of polymer synthesis. New York, NY: Marcel Dekker.
- Kudoh, Y., Fukuyama, M., Kojima, T., Nanai, N., & Yoshimura, S. (1993). A highly thermostable aluminimum solid electrolyte capacitor with an electroconducting polymer electrolyte. In M. Aldissi (Ed.), Intrinsically conducting polymers: An emerging technology (pp. 191–207). Burlington, VT: Springer Science and Business Media, B. V..10.1007/978-94-017-1952-0
- Kuhn, H. H. (1993). Characterization and application of polypyrrole-coated textiles. In M. Aldissi (Ed.), Intrinsically conducting polymers: An emerging technology (pp. 25–34). Burlington, VT: Springer Science and Business Media, B. V..10.1007/978-94-017-1952-0
- Kurachi, K., & Kise, H. (1994). Preparation of polypyrrole/polyethylene composite films by the vapor-phase oxidative polymerization of pyrrole. Polymer Journal, 26, 1325–1331.10.1295/polymj.26.1325
- Kurachi, K., & Kise, H. (1995). Anisotropy in electrical conduction of polypyrrole/polyethylene composite films by drawing. Macromolecular Chemistry and Physics, 196, 929–936.10.1002/macp.1995.021960320
- Maiti, S., Das, D., & Sen, K. (2012a). Studies on electro-conductive yarns prepared by in-situ chemical and electrochemical polymerization of pyrrole. Journal of Applied Polymer Science, 123, 455–462.10.1002/app.34299
- Maiti, S., Das, D., & Sen, K. (2012b). Electrochemical polymerization of pyrrole: Key process control parameters. Journal of the Electrochemical Society, 159, E154–E158.10.1149/2.050209jes
- Maiti, S., Das, D., & Sen, K. (2014). Characterization of electro-conductive fabrics prepared by in situ chemical and electrochemical polymerizations of pyrrole onto polyester fabric. Materials Science and Engineering: B, 96–101.10.1016/j.mseb.2014.05.003
- Maiti, S., Das, D., & Sen, K. (2017). Flexible non-metallic electro-conductive textiles. Textile Progress, 49, 1–52.10.1080/00405167.2017.1278875
- Naoi, K., Ishijima, A., & Osaka, T. (1987). An improvement of battery performance of lithium batteries assembled with a polypyrrole cathode formed electrochemically with the aid of a nitrile rubber insulating film. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, 217, 203–207.10.1016/0022-0728(87)85074-X
- Nigorikawa, K., Kunugi, Y., Harima, Y., & Yamashita, K. (1995). A selective gas sensor using a polypyrrole thin film as a sensitive matrix on a piezoelectric crystal. Journal of Electroanalytical Chemistry, 396, 563–567.10.1016/0022-0728(95)04241-F
- Nishio, K., Fujimoto, M., Yoshinaga, N., Furukawa, N., Ando, O., Ono, H., & Suzuki, T. (1991). Characteristics of a lithium secondary battery using chemically-synthesized conductive polymers. Journal of Power Sources, 34, 153–160.10.1016/0378-7753(91)85035-U
- Noufi, R., Tench, D., & Warren, L. F. (1981). Protection of semiconductor photoanodes with photoelectrochemically generated polypyrrole films. Journal of the Electrochemical Society, 128, 2596–2599.10.1149/1.2127298
- Pei, Q., & Inganäs, O. (1993). Electrochemical muscles: Bending strips built from conjugated polymers. Synthetic Metals, 57, 3718–3723.10.1016/0379-6779(93)90503-O
- Sadki, S., Schottland, P., Brodie, N., & Sabouraud, G. (2000). The mechanisms of pyrrole electropolymerization. Chemical Society Reviews, 29, 283–293.
- Shin, M.-C., & Kim, H.-S. (1995). Effects of enzyme concentration and film thickness on the analytical performance of a polypyrrole/glucose oxidase biosensor. Analytical Letters, 28, 1017–1031.10.1080/00032719508002676
- Skotheim, T. A., Feldberg, S. W., & Armand, M. B. (1983). Polypyrrole electrodes, charge transfer to aqueous and solid polymer electrolytes. Journal de Physique Colloques, 44, C3 615–C3 620.
- Vernitskaya, T. V., & Efimov, O. N. (1997). Polypyrrole: A conducting polymer; its synthesis, properties and applications. Russian Chemical reviews, 66, 443–457.10.1070/RC1997v066n05ABEH000261
- Wrighton, M. S. (1986). Surface functionalization of electrodes with molecular reagents. Science, 231, 32–37.10.1126/science.231.4733.32
- Yakubu, I. S., Ahmed, S., & Saidu, U. (2016). Humidity sensing study of pyrrole/copper oxide nano composites. International Journal of Scientific Research and Engineering Studies, 9, 1–5.
- Yoshino, K., Tabata, M., Kaneto, K., & Ohsawa, T. (1985). Application and characteristics of conducting polymer as radiation shielding material. Japanese Journal of Applied Physics Part 2, 24, L693–L695.10.1143/JJAP.24.L693
- Yoshida, S., Kanno, H., & Watanabe, T. (1995). Glutamate sensors carrying glutamate oxidase/peroxidase bienzyme system on tin oxide electrode. Analytical Sciences, 11, 251–256.10.2116/analsci.11.251