References
- Boussuge, M., & Munier, E. (1999). From the yarn to the bulk: A meso-macro approach of the mechanical behavior of 2D ceramic matrix composites. High Temperature Ceramic Matrix Composites III. Key Engineering Materials, 164-1, 261–264. doi:10.4028/www.scientific.net/KEM.164-165.261
- Dong, F., Hou, G., Cao, F., Yan, F., Liu, L., & Wang, J. (2016). The lubricity and reinforcement of carbon fibers in polyimide at high temperatures. Tribology International, 101, 291–300. doi:10.1016/j.triboint.2016.04.035
- Dong, K., Liu, K., Zhang, Q., Gu, B., & Sun, B. (2016). Experimental and numerical analyses on the thermal conductive behaviors of carbon fiber/epoxy plain woven composites. International Journal of Heat & Mass Transfer, 102, 501–517. doi:10.1016/j.ijheatmasstransfer.2016.06.035
- Du, B., Hong, C., Zhou, S., Liu, C., & Zhang, X. (2016). Multi-composition coating for oxidation protection of modified carbon-bonded carbon fiber composites. Journal of the European Ceramic Society, 36(14), 3303–3310. doi:10.1016/j.jeurceramsoc.2016.05.028
- Fu, Z., Liu, B., Deng, Y., Ma, J., Cao, C., Wang, J., … Zhang, H. (2016). The suitable itaconic acid content in polyacrylonitrile copolymers used for PAN-based carbon fibers. Journal of Applied Polymer Science, 133, 43919.
- Jiang, Y., & Wang, S. Y. (2007). Characterization and EIB testing of the bulking property of yarn. Journal of Donghua University, 33, 760–763.
- Kleinhans, H., & Salmén, L. (2016). Development of lignin carbon fibers: Evaluation of the carbonization process. Journal of Applied Polymer Science, 133, 43965.
- Li, S., Wang, Y., Wei, Y., Zeng, J., Shi, W., & Wang, Y. (2016). Preparation and adsorption performance of palm fiber-based nanoporous carbon materials with high specific surface area. Journal of Porous Materials, 23(4), 1059–1064.
- Liu, B., Wang, H., Chen, Y., Wang, J., Peng, L., & Li, L. (2016). Pt nanoparticles anchored on Nb2O5 and carbon fibers as an enhanced performance catalyst for methanol oxidation. Journal of Alloys & Compounds, 682, 584–589. doi:10.1016/j.jallcom.2016.04.291
- Liu, L., Tian, B., Sun, W. R., Zhen, H. L., & Shan, W. R. (2016). Bright-dark vector soliton solutions for a generalized coupled Hirota system in the optical glass fiber. Communications in Nonlinear Science & Numerical Simulation, 39, 545–555. doi:10.1016/j.cnsns.2016.04.001
- Liu, Y. J., Zhao, X., M., & Tuo, X. (2016). A discussion on the development and performance of the bulk yarn of glass fiber used as thermal insulation material. Materials Review, 30, 103–107.
- Liu, Y. J., Zhao, X. M., Li, W. B., Tuo, X., & Anja, H. (2015). A study on the performance of fancy bulk yarn of glass fiber. Journal of Silk, 52, 16–20.
- Mathivanan, N. R., Mahesh, B. S., & Shetty, H. A. (2016). An experimental investigation on the process parameters influencing machining forces during milling of carbon and glass fiber laminates. Measurement, 91, 39–45. doi:10.1016/j.measurement.2016.04.077
- Nakamura, K., Sato, Y., & Takase, T. (2016). Analysis of oxidation behavior of vapor-grown carbon fiber (VGCF) under dry air. Materials Letters, 180, 302–304. doi:10.1016/j.matlet.2016.05.184
- Okuda, H., Young, R. J., Tanaka, F., Watanabe, J., & Okabe, T. (2016). Tensile failure phenomena in carbon fibres. Carbon, 107, 474–481. doi:10.1016/j.carbon.2016.06.037
- Shaikhzadeh Najar, S., Etrati, S. M., Seyed-Esfahani, M. H., & Hadi, H. (2005). The effect of blend ratios of unrelaxed and relaxed acrylic fibres on physical properties of high-bulk worsted yarns. Journal of the Textile Institute, 96(5), 311–318. doi:10.1533/joti.2005.0015
- Sun, H., Memon, S. A., Gu, Y., Zhu, M., Zhu, G. H., & Xing, F. (2016). Degradation of carbon fiber reinforced polymer from cathodic protection process on exposure to NaOH and simulated pore water solutions. Materials & Structures, 49(12), 5273–5283. doi:10.1617/s11527-016-0859-8
- Tavanai, H., Morshed, M., & Hosseini, S. M. (2003). Effects of on-line melt blending of polypropylene with polyamide 6 on the bulk and strength of the resulting BCF yarn. Iranian Polymer Journal, 12, 421–430.
- Wang, R., Gao, Y. Y., Zong, Y. N., & Wang, S. Y. (2004). Testing and discussion on the morphology and bulk of the textured yarn by EIB. Journal of Donghua University: Natural Science Edition, 30, 65–68.
- Xia, L., Zhang, T., Chai, Z., Hu, X., Jin, F., & Wen, G. (2016). Effect of boron doping on fracture behavior of carbon fiber reinforced lithium aluminosilicate glass ceramics matrix composites. Journal of the European Ceramic Society, 36(14), 3513–3522. doi:10.1016/j.jeurceramsoc.2016.05.015
- Yang, S., Li, L., Xiao, T., Zheng, D., & Zhang, Y. (2016). Role of surface chemistry in modified ACF (activated carbon fiber)-catalyzed peroxymonosulfate oxidation. Applied Surface Science, 383, 142–150. doi:10.1016/j.apsusc.2016.04.163
- Yang, Y., Sun, W., Zhang, J., Yue, X., Wang, Z., & Sun, K. (2016). High rate and stable cycling of lithium-sulfur batteries with carbon fiber cloth interlayer. Electrochimica Acta, 209, 691–699. doi:10.1016/j.electacta.2016.05.092
- Zhao, X., M., Liu, G., Y., & Liu, Y. J. (2017). Production of carbon fibre bulked yarns by the airflow dispersion method. Fibres & Textiles in Eastern Europe, 25, 34–40. doi:10.5604/01.3001.0010.5366