References
- Ahmad, F., Choi, H. S., & Park, M. K. (2015). A review: Natural fiber composites election in view of mechanical, light weight and economic properties. Macromolecular Materials and Engineering, 300(1), 10–24. https://doi.org/https://doi.org/10.1002/mame.201400089
- Bakare, I. O., Okieimen, F. E., Pavithran, C., Khalil, H. P. S. A., & Brahmakumar, M. (2010). Mechanical and thermal properties of sisal fiber-reinforced rubber seed oil-based polyurethane composites. Materials & Design, 31(9), 4274–4280.
- Bar, M., Alagirusamy, R., & Das, A. (2019). Development of flax-PP based twist-less thermally bonded roving for thermoplastic composite reinforcement. The Journal of the Textile Institute, 110(10), 1369–1379. https://doi.org/https://doi.org/10.1080/00405000.2019.1610997
- Boujmal, R., Kakou, C. A., Nekhlaoui, S., Essabir, H., Bensalah, M.-O., Rodrigue, D., Qaiss, A., & el, k. (2018). Alfa fibers/clay hybrid composites based on polypropylene: Mechanical, thermal and structural properties. Journal of Thermoplastic Composite Materials, 31(7), 974–991. https://doi.org/https://doi.org/10.1177/0892705717729197
- Chan, M.-L., Lau, K.-T., Wong, T.-T., Ho, M.-P., & Hui, D. (2011). Mechanism of reinforcement in a nanoclay/polymer composite. Composites Part B: Engineering, 42(6), 1708–1712. https://doi.org/https://doi.org/10.1016/j.compositesb.2011.03.011
- Chen, S., Cheng, L., Huang, H., Zou, F., & Zhao, H. P. (2017). Fabrication and properties of poly(butylene succinate) biocomposites reinforced by waste silkworm silk fabric. Composites Part A: Applied Science and Manufacturing, 95, 125–131. https://doi.org/https://doi.org/10.1016/j.compositesa.2017.01.004
- Das, S. (2017). Mechanical properties of waste paper/jute fabric reinforced polyester resin matrix hybrid composites. Carbohydrate Polymers, 172, 60–67. https://doi.org/https://doi.org/10.1016/j.carbpol.2017.05.036
- Furtado, S. C. R., Araújo, A. L., Silva, A., Alves, C., & Ribeiro, A. M. R. (2014). Natural fibre-reinforced composite parts for automotive applications. International Journal of Automotive Composites, 1(1), 18–38. https://doi.org/https://doi.org/10.1504/IJAUTOC.2014.064112
- Goertzen, W. K., & Kessler, M. R. (2008). Dynamic mechanical analysis of fumed silica/cyanate ester nanocomposites. Composites Part A: Applied Science and Manufacturing, 39(5), 761–768. https://doi.org/https://doi.org/10.1016/j.compositesa.2008.02.006
- Gupta, M. K. (2018). Thermal and dynamic mechanical analysis of hybrid jute/sisal fibre reinforced epoxy composite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(9), 743–748. https://doi.org/https://doi.org/10.1177/1464420716646398
- Hakamy, A., Shaikh, F. U. A., & Low, I. M. (2014). Thermal and mechanical properties of hemp fabric-reinforced nanoclay–cement nanocomposites. Journal of Materials Science, 49(4), 1684–1694. https://doi.org/https://doi.org/10.1007/s10853-013-7853-0
- Karus, M., & Kaup, M. (2002). Natural fibres in the European automotive industry. Journal of Industrial Hemp, 7(1), 119–131. https://doi.org/https://doi.org/10.1300/J237v07n01_10
- Khalil, H. P. S. A., Firoozian, P., Bakare, I. O., Akil, H. M., & Noor, A. M. (2010). Exploring biomass based carbon black as filler in epoxy composites: Flexural and thermal properties. Materials & Design, 31(7), 3419–3425.
- Kini, U. A., Nayak, S. Y., Heckadka, S. S., Thomas, L. G., Adarsh, S. P., & Gupta, S. (2018). Borassus and tamarind fruit fibers as reinforcement in cashew nut shell liquid-epoxy composites. Journal of Natural Fibers, 15(2), 204–218. https://doi.org/https://doi.org/10.1080/15440478.2017.1323697
- Mahadevaswamy, H. S., & Suresha, B. (2019). Role of nano-CaCO3 on mechanical and thermal characteristics of pineapple fibre reinforced epoxy composites. Materials Today-Proceedings. https://doi.org/https://doi.org/10.1016/j.matpr.2019.08.211
- Pandian, C. K. A., & Jailani, H. S. (2018). Investigation of viscoelastic attributes and vibrational characteristics of natural fabrics-incorporated hybrid laminate beams. Polymer Bulletin, 75, 1997–2014.
- Pandian, C. K. A., & Jailani, H. S. (2019). Dynamic and vibrational characterization of natural fabrics incorporated hybrid composites using industrial waste silica fumes. International Journal of Polymer Analysis and Characterization, 24(8), 721–730.
- Pandian, C. K. A., & Jailani, H. S. (2020). Linen fabric–jute fabric–fumed silica–epoxy sandwich laminate: AWJ machining and multi-response optimisation. Silicon. https://doi.org/https://doi.org/10.1007/s12633-020-00515-0
- Pandian, C. K. A., Jailani, H. S., & Rajadurai, A. (2017). Natural fabric sandwich laminate composites: Development and investigation. Bulletin of Materials Science, 40(1), 139–146. https://doi.org/https://doi.org/10.1007/s12034-016-1356-y
- Prabhakaran, S., Krishnaraj, V., Shankar, K., Senthilkumar, M., & Zitoune, R. (2020). Experimental investigation on impact, sound, and vibration response of natural-based composite sandwich made of flax and agglomerated cork. Journal of Composite Materials, 54(5), 669–680. https://doi.org/https://doi.org/10.1177/0021998319871354
- Prabu, V. A., Uthayakumar, M., Manikandan, V., Rajini, N., & Jeyaraj, P. (2014). Influence of redmud on the mechanical, damping and chemical resistance properties of banana/polyester hybrid composites. Materials & Design, 64, 270–279.
- Puglia, D., Santulli, C., Sarasini, F., Kenny, J., & Valente, T. (2014). Thermal and mechanical characterisation of Phormium tenax-reinforced polypropylene composites. Journal of Thermoplastic Composite Materials, 27(11), 1493–1503. https://doi.org/https://doi.org/10.1177/0892705712473629
- Rajesh, M., Jeyaraj, P., & Rajini, N. (2016). Mechanical, dynamic mechanical and vibration behavior of nanoclay dispersed natural fiber hybrid intra-ply woven fabric composite. In M. Jawaid, A. Qaiss, & R. Bouhfid (Eds.), Nanoclay reinforced polymer composites. Engineering materials (pp. 281–296). Springer.
- Rajini, N., Jappes, J. W., Rajakarunakaran, S., & Jeyaraj, P. (2012). Mechanical and free vibration properties of montmorillonite clay dispersed with naturally woven coconut sheath composite. Journal of Reinforced Plastics and Composites, 31(20), 1364–1376. https://doi.org/https://doi.org/10.1177/0731684412455259
- Rajini, N., Jappes, J. T. W., Rajakarunakaran, S., & Jeyaraj, P. (2013). Dynamic mechanical analysis and free vibration behavior in chemical modifications of coconut sheath/nano-clay reinforced hybrid polyester composite. Journal of Composite Materials, 47(24), 3105–3121. https://doi.org/https://doi.org/10.1177/0021998312462618
- Ramesh, P., Prasad, B. D., & Narayana, K. L. (2020). Effect of MMT clay on mechanical, thermal and barrier properties of treated aloevera fiber/pla-hybrid biocomposites. Silicon, 12(7), 1751–1760. https://doi.org/https://doi.org/10.1007/s12633-019-00275-6
- Rashid, E. S. A., Ariffin, K., Kooi, C. C., & Akil, H. M. (2009). Preparation and properties of POSS/epoxy composites for electronic packaging applications. Materials & Design, 30(1), 1–8. https://doi.org/https://doi.org/10.1016/j.matdes.2008.04.065
- Rastogi, S., & Kandasubramanian, B. (2020). Processing trends of silk fibers: Silk degumming, regeneration and physical functionalization. The Journal of the Textile Institute, 111(12), 1794–1810. https://doi.org/https://doi.org/10.1080/00405000.2020.1727269
- Razali, N., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Lazim, Y. (2016). Mechanical and thermal properties of roselle fibre reinforced vinyl ester composites. BioResources, 11(4), 9325–9339. https://doi.org/https://doi.org/10.15376/biores.11.4.9325-9339
- Sastra, H. Y., Siregar, J. P., Sapuan, S. M., & Hamdan, M. M. (2006). Tensile properties of arenga pinnata fiber-reinforced epoxy composites. Polymer–Plastics Technology and Engineering, 45(1), 149–155. https://doi.org/https://doi.org/10.1080/03602550500374038
- Tarrío-Saavedra, J., López-Beceiro, J., Naya, S., & Artiaga, R. (2008). Effect of silica content on thermal stability of fumed silica/epoxy composites. Polymer Degradation and Stability, 93(12), 2133–2137. https://doi.org/https://doi.org/10.1016/j.polymdegradstab.2008.08.006