References
- Ahmad, A. L., Otitoju, T. A., & Ooi, B. S. (2019). Hollow fiber (HF) membrane fabrication: A review on the effects of solution spinning conditions on morphology and performance. Journal of Industrial and Engineering Chemistry, 70, 35–50. https://doi.org/https://doi.org/10.1016/j.jiec.2018.10.005
- Alsalhy, Q. F. (2007). Effect of ethanol concentrations in internal coagulant on the morphology and separation performance of polyethersulfone (PES) hollow fiber UF membranes prepared by PES/ethanol/NMP solution. Engineering and Technology Journal, 25(suppl. of No. 2), 253–265.
- Alsalhy, Q. F., Salih, H. A., Simone, S., Zablouk, M., Drioli, E., & Figoli, A. (2014). Poly (ether sulfone) (PES) hollow-fiber membranes prepared from various spinning parameters. Desalination, 345, 21–35. https://doi.org/https://doi.org/10.1016/j.desal.2014.04.029
- Buruga, K., Song, H., Shang, J., Bolan, N., Jagannathan, T. K., & Kim, K. H. (2019). A review on functional polymer-clay based nanocomposite membranes for treatment of water. Journal of Hazardous Materials, 379, 120584. https://doi.org/https://doi.org/10.1016/j.jhazmat.2019.04.067
- Cabasso, I., Klein, E., & Smith, J. K. (1976). Polysulfone hollow fibers. I. Spinning and properties. Journal of Applied Polymer Science, 20(9), 2377–2394. https://doi.org/https://doi.org/10.1002/app.1976.070200908
- Dlamini, D. S., Li, J., & Mamba, B. B. (2019). Critical review of montmorillonite/polymer mixed-matrix filtration membranes: Possibilities and challenges. Applied Clay Science, 168, 21–30. https://doi.org/https://doi.org/10.1016/j.clay.2018.10.016
- Foorginezhad, S., & Zerafat, M. M. (2017). Microfiltration of cationic dyes using nano-clay membranes. Ceramics International, 43(17), 15146–15159. https://doi.org/https://doi.org/10.1016/j.ceramint.2017.08.045
- Gopal, N., Asaithambi, M., Sivakumar, P., & Sivakumar, V. (2014). Adsorption studies of a direct dye using polyaniline coated activated carbon prepared from Prosopis juliflora. Journal of Water Process Engineering, 2, 87–95. https://doi.org/https://doi.org/10.1016/j.jwpe.2014.05.008
- Hamzeh, Y., Ashori, A., Azadeh, E., & Abdulkhani, A. (2012). Removal of acid orange 7 and remazol black 5 reactive dyes from aqueous solutions using a novel biosorbent. Materials Science and Engineering: C, 32(6), 1394–1400. https://doi.org/https://doi.org/10.1016/j.msec.2012.04.015
- Hosseini, S. A., Vossoughi, M., Mahmoodi, N. M., & Sadrzadeh, M. (2019). Clay-based electrospun nanofibrous membranes for colored wastewater treatment. Applied Clay Science, 168, 77–86. https://doi.org/https://doi.org/10.1016/j.clay.2018.11.003
- Hwang, H. Y., Deuk-Ju, K. I. M., Hyung-Jun, K. I. M., Young-Taik, H. O. N. G., & Sang-Yong, N. A. M. (2011). Effect of nanoclay on properties of porous PVdF membranes. Transactions of Nonferrous Metals Society of China, 21, s141–s147. https://doi.org/https://doi.org/10.1016/S1003-6326(11)61078-9
- Kausar, A., Iqbal, M., Javed, A., Aftab, K., Nazli, Z-i-H., Bhatti, H. N., & Nouren, S. (2018). Dyes adsorption using clay and modified clay: A review. Journal of Molecular Liquids, 256, 395–407. https://doi.org/https://doi.org/10.1016/j.molliq.2018.02.034
- Khayet, M. (2003). The effects of air gap length on the internal and external morphology of hollow fiber membranes. Chemical Engineering Science, 58(14), 3091–3104. https://doi.org/https://doi.org/10.1016/S0009-2509(03)00186-6
- Lai, C. Y., Groth, A., Gray, S., & Duke, M. (2014). Enhanced abrasion resistant PVDF/nanoclay hollow fibre composite membranes for water treatment. Journal of Membrane Science, 449, 146–157. https://doi.org/https://doi.org/10.1016/j.memsci.2013.07.062
- Liang, C. Z., Sun, S. P., Li, F. Y., Ong, Y. K., & Chung, T. S. (2014). Treatment of highly concentrated wastewater containing multiple synthetic dyes by a combined process of coagulation/flocculation and nanofiltration. Journal of Membrane Science, 469, 306–315. https://doi.org/https://doi.org/10.1016/j.memsci.2014.06.057
- Lin, Y.-T., Kao, F.-Y., Chen, S.-H., Wey, M.-Y., & Tseng, H.-H. (2020). A facile approach from waste to resource: Reclaimed rubber-derived membrane for dye removal. Journal of the Taiwan Institute of Chemical Engineers, 112, 286–295. https://doi.org/https://doi.org/10.1016/j.jtice.2020.06.004
- Mahmoodi, N. M., Salehi, R., & Arami, M. (2011). Binary system dye removal from colored textile wastewater using activated carbon: Kinetic and isotherm studies. Desalination, 272(1-3), 187–195. https://doi.org/https://doi.org/10.1016/j.desal.2011.01.023
- Mukhopadhyay, R., Bhaduri, D., Sarkar, B., Rusmin, R., Hou, D., Khanam, R., Sarkar, S., Kumar Biswas, J., Vithanage, M., Bhatnagar, A., & Ok, Y. S. (2020). Clay-polymer nanocomposites: Progress and challenges for use in sustainable water treatment. Journal of Hazardous Materials, 383, 121125. https://doi.org/https://doi.org/10.1016/j.jhazmat.2019.121125
- Ouaddari, H., Karim, A., Achiou, B., Saja, S., Aaddane, A., Bennazha, J., El Amrani El Hassani, I., Ouammou, M., & Albizane, A. (2019). New low-cost ultrafiltration membrane made from purified natural clays for direct Red 80 dye removal. Journal of Environmental Chemical Engineering, 7(4), 103268. https://doi.org/https://doi.org/10.1016/j.jece.2019.103268
- Peng, N., Widjojo, N., Sukitpaneenit, P., Teoh, M. M., Lipscomb, G. G., Chung, T. S., & Lai, J. Y. (2012). Evolution of polymeric hollow fibers as sustainable technologies: Past, present, and future. Progress in Polymer Science, 37(10), 1401–1424. https://doi.org/https://doi.org/10.1016/j.progpolymsci.2012.01.001
- Rodrigues, R., Mierzwa, J. C., & Vecitis, C. D. (2019). Mixed matrix polysulfone/clay nanoparticles ultrafiltration membranes for water treatment. Journal of Water Process Engineering, 31, 100788. https://doi.org/https://doi.org/10.1016/j.jwpe.2019.100788
- Saja, S., Bouazizi, A., Achiou, B., Ouaddari, H., Karim, A., Ouammou, M., Aaddane, A., Bennazha, J., & Alami Younssi, S. (2020). Fabrication of low-cost ceramic ultrafiltration membrane made from bentonite clay and its application for soluble dyes removal. Journal of the European Ceramic Society, 40(6), 2453–2462. https://doi.org/https://doi.org/10.1016/j.jeurceramsoc.2020.01.057
- Shi, L., Wang, R., Cao, Y., Liang, D. T., & Tay, J. H. (2008). Effect of additives on the fabrication of poly (vinylidene fluoride-co-hexafluropropylene) (PVDF-HFP) asymmetric microporous hollow fiber membranes. Journal of Membrane Science, 315(1-2), 195–204. https://doi.org/https://doi.org/10.1016/j.memsci.2008.02.035
- Simona, C., Raluca, I., Anita-Laura, R., Andrei, S., Raluca, S., Bogdan, T., Elvira, A., Catalin-Ilie, S., Radu Claudiu, F., Daniela, I.-E., Silviu, P., Leonard-Ionut, A., & Dan, D. (2017). Synthesis, characterization and efficiency of new organically modified montmorillonite polyethersulfone membranes for removal of zinc ions from wastewasters. Applied Clay Science, 137, 135–142. https://doi.org/https://doi.org/10.1016/j.clay.2016.12.013
- Uddin, M. K. (2017). A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade. Chemical Engineering Journal, 308, 438–462. https://doi.org/https://doi.org/10.1016/j.cej.2016.09.029
- Wang, Y. F., Gao, B. Y., Yue, Q. Y., Wang, Y., & Yang, Z. L. (2012). Removal of acid and direct dye by epichlorohydrin-dimethylamine: Flocculation performance and floc aggregation properties. Bioresource Technology, 113, 265–271. https://doi.org/https://doi.org/10.1016/j.biortech.2011.11.106
- Wen, Y., Li, H., Peng, G., Yang, Y., & Liu, L. (2010). HRTEM nanostructural evolution of onion-like spheres in polyacrylonitrile fibres during stabilization and carbonization. Materials Science-Poland, 28(2), 479–490.
- Yadav, V. B., Gadi, R., & Kalra, S. (2019). Clay based nanocomposites for removal of heavy metals from water: A review. Journal of Environmental Management, 232, 803–817. https://doi.org/https://doi.org/10.1016/j.jenvman.2018.11.120
- Yang, M. C., & Chou, M. T. (1996). Effect of post-drawing on the mechanical and mass transfer properties of polyacrylonitrile hollow fiber membranes. Journal of Membrane Science, 116(2), 279–291. https://doi.org/https://doi.org/10.1016/0376-7388(96)00055-5
- Yu, D. G., Chou, W. L., & Yang, M. C. (2006). Effect of bore liquid temperature and dope concentration on mechanical properties and permeation performance of polyacrylonitrile hollow fibers. Separation and Purification Technology, 51(1), 1–9. https://doi.org/https://doi.org/10.1016/j.seppur.2005.12.016
- Yu, S., Zheng, Y., Zhou, Q., Shuai, S., Lü, Z., & Gao, C. (2012). Facile modification of polypropylene hollow fiber microfiltration membranes for nanofiltration. Desalination, 298, 49–58. https://doi.org/https://doi.org/10.1016/j.desal.2012.04.027
- Zhang, S., Horrocks, A. R., Hull, R., & Kandola, B. K. (2006). Flammability, degradation and structural characterization of fibre-forming polypropylene containing nanoclay–flame retardant combinations. Polymer Degradation and Stability, 91(4), 719–725. https://doi.org/https://doi.org/10.1016/j.polymdegradstab.2005.05.023
- Zheng, Y., Yao, G., Cheng, Q., Yu, S., Liu, M., & Gao, C. (2013). Positively charged thin-film composite hollow fiber nanofiltration membrane for the removal of cationic dyes through submerged filtration. Desalination, 328, 42–50. https://doi.org/https://doi.org/10.1016/j.desal.2013.08.009