References
- Ajayi, J. O. (1992). Effects of fabric structure on frictional properties. Textile Research Journal, 62(2), 87–93.
- Alirezazadeh, A., Zarrebini, M., Ghane, M., & Soltani, P. (2018). Fiber-on-fiber friction measurement using hanging fiber method. Journal of the Textile Institute., 109(5), 636–646.
- Allaoui, S., Hivet, G., Wendling, A., Ouagne, P., & Soulat, D. (2012). Influence of the dry woven fabrics meso-structure on fabric/fabric contact behavior. Journal of Composite Materials, 46(6), 627–639.
- Arshi, A., Jeddi, A. A., & Moghadam, M. B. (2012). Modeling and optimizing the frictional behavior of woven fabrics in climatic conditions using response surface methodology. Journal of the Textile Institute, 103(4), 356–369.
- Benediktsson, J. A., Pesaresi, M., & Arnason, K. (2003). Classification and feature extraction for remote sensing images from urban areas based on morphological transformations. IEEE Transactions on Geoscience and Remote Sensing, 41, 1940–1949.
- Bilisik, K. (2012). Multiaxis three-dimensional weaving for composites: A review. Textile Research Journal, 82(7), 725–743.
- Boisse, P., Zouari, B., & Gasser, A. (2005). A mesoscopic approach for the simulation of woven fibre composite forming. Composites Science and Technology, 65(3-4), 429–436.
- Briscoe, B. J., & Kremnitzer, S. L. (1979). A study of the friction and adhesion of polyethylene-terephthalate monofilaments. Journal of Physics D: Applied Physics, 12(4), 505–516.
- Chakladar, N. D., Mandal, P., & Potluri, P. (2014). Effects of inter-tow angle and tow size on carbon fibre friction. Composites Part A: Applied Science and Manufacturing, 65, 115–124.
- Cornelissen, B., de Rooji, M. B., Rietman, B., & Akkerman, R. (2014). Frictional behavior of carbon fiber tows: A contact mechanics model of tow-tow friction. Textile Research Journal, 84(14), 1476–1488.
- Cornelissen, B., Rietman, B., & Akkerman, R. (2013). Frictional behaviour of high performance fibrous tows: Friction experiments. Composites Part A: Applied Science and Manufacturing, 44, 95–104.
- Gupta, B. S., & El, M. Y. E. (1991). Friction in fibrous materials: Part I: Structural model. Textile Research Journa., 61(9), 547–555.
- Haleem, N., & Wang, X. (2015). Recent research and developments on yarn hairiness. Textile Research Journal, 85(2), 211–224.
- Hivet, G., Allaoui, S., Cam, B. T., Ouagne, P., & Soulat, D. (2012). Design and potentiality of an apparatus for measuring yarn/yarn and fabric/fabric friction. Experimental Mechanics, 52(8), 1123–1136.
- Howell, H. G. (2013). 27—Inter-fibre friction. Journal of the Textile Institute, 42(12), T521–T533.
- Ismail, N., de Rooij, M. B., de Vries, E. G., Hilwa Mohd Zini, N., & Schipper, D. J. (2019). Friction between single aramid fibres under pre-tension load. Tribology International, 137, 236–245.
- Kang, H. R., Shan, Z. D., Zang, Y., & Liu, F. (2016). Progressive damage analysis and strength properties of fiber-bar composites reinforced by three-dimensional weaving under uniaxial tension. Composite Structures, 141, 264–281.
- Lee, B., Leong, K. H., & Herszberg, I. (2001). Effect of weaving on the tensile properties of carbon fibre tows and woven composites. Journal of Reinforced Plastics and Composites, 20(8), 652–670
- Lee, L., Rudov-Clark, S., Mouritz, A. P., Bannister, M. K., & Herszberg, I. (2002). Effect of weaving damage on the tensile properties of three-dimensional woven composites. Composite Structures., 57(14), 405–413.
- Lefebvre, M., Boussu, F., & Coutellier, D. (2013). Influence of high-performance yarns degredation inside three-dimensional warp interlock fabric. Journal of Industrial Textiles, 42(4), 475–488.
- Montero, L., Allaoui, S., & Hivet, G. (2017). Characterisation of the mesoscopic and macroscopic friction behaviours of glass plain weave reinforcement. Composites Part A: Applied Science and Manufacturing, 95, 257–266.
- Mulvihill, D. M., Smerdova, O., & Sutcliffe, M. P. F. (2017). Friction of carbon fibre tows. Composites Part A: Applied Science and Manufacturing, 93, 185–198.
- Otsu, N. (2007). A threshold selection method from gray-level histograms. IEEE Transactions on Systems, Man, and Cybernetics, 9(1), 62–66.
- Pascoe, M. W., Tabor, D. (1956). The friction and deformation of polymers. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 210–224.
- Roselman, I. C., & Tabor, D. (1977). The friction and wear of individual carbon fibres. Journal of Physics D: Applied Physics, 10, 1181–1194.
- Rudov-Clark, S., Mouritz, A. P., Lee, L., & Bannister, M. K. (2003). Fibre damage in the manufacture of advanced three-dimensional woven composites. Composites Part A: Applied Science and Manufacturing, 34(10), 963–970.
- Shan, Z. D., Chen, S. S., Zhang, Q., Qiao, J. J., Wu, X. C., & Zhan, L. (2015). Three-dimensional woven forming technology and equipment. Journal of Composite Materials, 50(12), 1587–1594.
- Tourlonias, M., & Bueno, M. A. (2016). Experimental simulation of friction and wear of carbon yarns during the weaving process. Composites Part A: Applied Science and Manufacturing, 80, 228–236.
- Tourlonias, M., Bueno, M. A., & Poquillon, D. (2017). Friction of carbon tows and fine single fibres. Composites Part A: Applied Science and Manufacturing, 98, 116–123.
- Tourlonias, M., Bueno, M. A., Jordan, C., & Poquillon, D. (2018). Influence of wear on the sizing layer and desizing of single carbon fibre-to-fibre friction. Wear, 402, 64–70.