The effect of electrospinning parameters on morphology and diameter of polyethylene terephthalate (PET) and recycled polyethylene terephthalate (r-PET) nanofibers

References

• Abbas, J. A., Said, I. A., Mohamed, M. A., Yasin, S. A., Ali, Z. A., & Ahmed, I. H. (2018). Electrospinning of polyethylene terephthalate (PET) nanofibers: Optimization study using Taguchi design of experiment. IOP Conference Series: Materials Science & Engineering, 454, 12130. https://doi.org/10.1088/1757-899X/454/1/012130
   Google Scholar
• Abunahel, B. M., Zahirah, N., Azman, N., & Jamil, M. (2018). Effect of needle diameter on the morphological structure of electrospun n-Bi2O3epoxy–PVA nanofiber mats. International Journal of Chemical & Materials Engineering, 12(6), 296–299. https://doi.org/10.5281/zenodo.1340577
   Google Scholar
• Adomavičiūtė, E., & Milašius, R. (2007). The ınfluence of applied voltage on poly(vinyl alcohol) (PVA) nanofibre diameter. Fibres & Textiles in Eastern Europe, 15(5), 69–72.
   Web of Science ®Google Scholar
• Ahmadian, A., Shafiee, A., Aliahmad, N., & Agarwal, M. (2021). Overview of nano-fiber mats fabrication via electrospinning and morphology analysis. Textiles, 1(2), 206–226. https://doi.org/10.3390/textiles1020010
   Google Scholar
• Al-Hazeem, N. Z. A. (2020). Effect of the distance between the needle tip and the collector on nanofibers morphology. Nanomedicine & Nanotechnology, 5(3), 1–5. https://doi.org/10.23880/nnoa-16000195
   Google Scholar
• Al-Hazeem, N. Z., Ahmed, N. M., Mat Jafri, M. Z., & Ramizy, A. (2021). The effect of deposition angle on morphology and diameter of electrospun TiO2/PVP nanofibers. Nanocomposites, 7(1), 70–78. https://doi.org/10.1080/20550324.2021.1917836
   Web of Science ®Google Scholar
• Bakar, S., Mun Foong, K., Abdul Halif, N. A., Hu, X., Tang, X., Han, N. S., Bakar, S. S., Fong, K. C., Eleyas, A., M., & Nazeri, M. F. (2018). Effect of voltage and flow rate electrospinning parameters on polyacrylonitrile electrospun fibers [Paper presentation]. IOP Conf. Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899X/318/1/012076
   Google Scholar
• Barua, B., & Saha, M. C. (2018). Influence of humidity, temperature, and annealing on microstructure and tensile properties of electrospun polyacrylonitrile nanofibers. Polymer Engineering & Science, 58(6), 998–1009. https://doi.org/10.1002/pen.24657
   Web of Science ®Google Scholar
• Begum, H. A., & Khan, K. R. (2017). Study on the various types of needle based and needleless electrospinning system for nanofiber production. International Journal of Textile Science, 6(4), 110–117. https://doi.org/10.5923/j.textile.20170604.03
   Google Scholar
• Bohaczuk Venturelli, R., S., Immich, A. P., M. A., Guelli, U., de Souza, S., & Antônio, A. A. (2021). Recycled polyester nanofiber as a reservoir for essential oil release. Journal of Applied Polymer Science, 138(16), 50258. https://doi.org/10.1002/app.50258
   Web of Science ®Google Scholar
• Bonfim, D. P. F., Cruz, F. G. S., Guerra, V. G., & Aguiar, M. L. (2021). Development of filter media by electrospinning for air filtration of nanoparticles from pet bottles. Membranes, 11(4), 293. https://doi.org/10.3390/membranes11040293
   PubMed Web of Science ®Google Scholar
• Cai, H., Tong, X., Chen, K., Shen, Y., Wu, J., Xiang, Y., Wang, Z., & Li, J. (2018). Electrospun polyethylene terephthalate nonwoven reinforced polypropylene separator: Scalable synthesis and its lithium ion battery performance. Polymers, 10(6), 574. https://doi.org/10.3390/polym10060574
   PubMed Web of Science ®Google Scholar
• Colmenares-Roldán, G. J., Quintero-Martínez, Y., Agudelo-Gómez, L. M., Rodríguez- Vinasco, L. F., & Hoyos-Palacio, L. M. (2017). Influence of the molecular weight of polymer, solvents and operational condition in the electrospinning of polycaprolactone. Revista Facultad de Ingenieria, (84), 35–45. https://doi.org/10.17533/udea.redin.n84a05
   Google Scholar
• Cramariuc, B., Cramariuc, R., Scarlet, R., Manea, L. R., Lupu, I. G., & Cramariuc, O. (2013). Fiber diameter in electrospinning process. Journal of Electrostatics, 71(3), 189–198. https://doi.org/10.1016/j.elstat.2012.12.018
   Web of Science ®Google Scholar
• Doğan, Y. K., Demirural, A., & Baykara, T. (2019). Single-needle electrospinning of PVA hollow nanofibers for core–shell structures. SN Applied Sciences, 1(5), 1–7. https://doi.org/10.1007/s42452-019-0446-z
   Web of Science ®Google Scholar
• Duan, Y., Kalluri, L., Satpathy, M., & Duan, Y. (2021). Effect of electrospinning parameters on the fiber diameter and morphology of PLGA nanofibers. Dental Oral Biology & Craniofacial Research, 4(2), 1–7. https://doi.org/10.31487/j.DOBCR.2021.02.04
   Google Scholar
• Düzyer, Ş. (2017). Fabrication of electrospun poly (ethylene terephthalate) scaffolds: Characterization and their potential on cell proliferation in vitro. Textile & Apparel, 27(4), 334–341.
   Google Scholar
• Düzyer, Ş. (2009). Nanoliflerin Yüzey Özellliklerinin İncelenmesi [Postgraduate dissertation]. Uludağ University, Bursa.
   Google Scholar
• Düzyer, Ş. (2014). Investigation of medical applications of polyester nanofibers produced by electrospinning [Doctoral dissertation]. Uludağ University.
   Google Scholar
• Düzyer, Ş., Koral Koç, S., Hockenberger, A., Evke, E., Kahveci, Z., & Uguz, A. (2013). Effects of different sterilization methods on polyester surfaces. Textile & Apparel, 23(4), 319–324.
   Google Scholar
• Gomes, S. S., Oliveira, A. M., Maia, A., & Zanin, M. H. A. (2016). Recycled PET nanofibers produced by electrospinning technique. Advanced Materials: TechConnect Briefs, 1, 335–338.
   Google Scholar
• Guo, Y., He, W., & Liu, J. (2019). Preparation and characterization of polyethylene terephthalate nanofiber membrane/polyester needle felt composite filters. Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 36(3), 572–577. https://doi.org/10.13801/j.cnki.fhclxb.20180704.002
   Google Scholar
• Guo, Y., He, W., & Liu, J. (2020). Electrospinning polyethylene terephthalate/SiO2 nanofiber composite needle felt for enhanced filtration performance. Journal of Applied Polymer Science, 137(2), 48282. https://doi.org/10.1002/app.48282
   Web of Science ®Google Scholar
• Hadjizadeh, A., Ajji, A., & Bureau, M. N. (2011). Nano/micro electro-spun polyethylene terephthalate fibrous mat preparation and characterization. Journal of the Mechanical Behavior of Biomedical Materials, 4(3), 340–351. https://doi.org/10.1016/j.jmbbm.2010.10.014
   PubMed Web of Science ®Google Scholar
• Hao, J., Lei, G., Li, Z., Wu, L., Xiao, Q., & Wang, L. (2013). A novel polyethylene terephthalate nonwoven separator based on electrospinning technique for lithium ion battery. Journal of Membrane Science, 428, 11–16. https://doi.org/10.1016/j.memsci.2012.09.058
   Web of Science ®Google Scholar
• Hasanzadeh, M., Hadavi Moghadam, B., Moghadam Abatari, M. H., & Haghi, A. K. (2013). On the production optimization of polyacrylonitrile electrospun nanofiber. Bulgarian Chemical Communications, 45(2), 178–190.
   Google Scholar
• Hwa Hong, K., & Jin Kang, T. (2006). Hydraulic permeabilities of PET and nylon 6 electrospun fiber webs. Journal of Applied Polymer Science, 100(1), 167–177. https://doi.org/10.1002/app.22651
   Web of Science ®Google Scholar
• Ibrahim, H. M., & Klingner, A. (2020). A review on electrospun polymeric nanofibers: Production parameters and potential applications. Polymer Testing, 90(May), 106647. https://doi.org/10.1016/j.polymertesting.2020.106647
   Google Scholar
• İçoğlu, H. İ. (2019). Effect of needle diameter and flow rate on electrospun polyacrylonitrile nanofiber morphology. Çukurova University Journal of the Faculty of Engineering & Architecture, 34(December), 163–170. https://doi.org/10.21605/cukurovaummfd.704171
   Google Scholar
• Islam, M. S., Ang, B. C., Andriyana, A., & Afifi, A. M. (2019). A review on fabrication of nanofibers via electrospinning and their applications. SN Applied Sciences, 1(10), 1–16. https://doi.org/10.1007/s42452-019-1288-4
   Web of Science ®Google Scholar
• Jabur, A., Abbas, L. K., & Muhi, S. M. (2017). Effects of ambient temperature and needle to collector distance on PVA. Engineering & Technology Journal, 35(4), 340–347.
   Google Scholar
• Jabur, A. R., Abbas, L. K., & Aldain, S. M. M. (2015). The effects of operating parameters on the morphology of electrospun polyvinyl alcohol nanofibres [Paper presentation]. The International 3rd. Scientific Conference of the College of Science, 35–46.
   Google Scholar
• Javazmi, L., Epaarachchi, J., & Hosseini Ravandi, S. A. (2013). Investigation of mechanical and physical properties of PET nanofiber hollow yarn. Journal of Multifunctional Composites, 1(2), 123–126. https://doi.org/10.12783/issn.2168-4286/1.2/Javazmi
   Google Scholar
• Javazmi, L., Ravandi, S. A. H., & Ghareaghaji, A. A. (2014). Fabrication and characterization of PET nanofiber hollow yarn. Fibers & Polymers, 15(5), 954–960. https://doi.org/10.1007/s12221-014-0954-9
   Web of Science ®Google Scholar
• Kenwright, A. M., Peace, S. K., Richards, R. W., Bunn, A., & MacDonald, W. A. (1999). End group modification in poly(ethylene terephthalate). Polymer, 40(8), 2035–2040. https://doi.org/10.1016/S0032-3861(98)00433-9
   Web of Science ®Google Scholar
• Kuchi, C., Harish, G. S., & Reddy, P. S. (2018). Effect of polymer concentration, needle diameter and annealing temperature on TiO2–PVP composite nanofibers synthesized by electrospinning technique. Ceramics International, 44(5), 5266–5272. https://doi.org/10.1016/j.ceramint.2017.12.138
   Web of Science ®Google Scholar
• Liu, Z., Ju, K., Wang, Z., Li, W., Ke, H., & He, J. (2019). Electrospun jets number and nanofiber morphology effected by voltage value: Numerical simulation and experimental verification. Nanoscale Research Letters, 14(1), 1–9. https://doi.org/10.1186/s11671-019-3148-y
   Google Scholar
• Liu, S., White, K. L., & Reneker, D. H. (2019). Electrospinning polymer nanofibers with controlled diameters. IEEE Transactions on Industry Applications, 55(5), 5239–5243. https://doi.org/10.1109/TIA.2019.2920811
   Web of Science ®Google Scholar
• Li, Z., & Wang, C. (2013). One dimensional nanostructures electrospinning technique and unique nanofibers. One-dimensional nanostructures. SpringerBriefs in Materials. https://doi.org/10.1007/978-3-642-36427-3
   Google Scholar
• Li, Y., Zhu, J., Cheng, H., Li, G., Cho, H., Jiang, M., Gao, Q., & Zhang, X. (2021). Developments of advanced electrospinning techniques: A critical review. Advanced Materials Technologies, 6(11), 2100410–2100429. https://doi.org/10.1002/admt.202100410
   Web of Science ®Google Scholar
• Mahar, F. K., Mehdi, M., Qureshi, U. A., Brohi, K. M., Zahid, B., Ahmed, F., & Khatri, Z. (2017). Dyeability of recycled electrospun polyethylene terephthalate (PET) nanofibers: Kinetics and thermodynamic study. Journal of Molecular Liquids, 248, 911–919. https://doi.org/10.1016/j.molliq.2017.10.116
   Web of Science ®Google Scholar
• Mahdavi, H., & Moslehi, M. (2016). A new thin film composite nanofiltration membrane based on PET nanofiber support and polyamide top layer: Preparation and characterization. Journal of Polymer Research, 23(12), 1–9. https://doi.org/10.1007/s10965-016-1157-4
   Web of Science ®Google Scholar
• Martín, D. M., Ahmed, M. M., Rodríguez, M., García, M. A., & Faccini, M. (2017). Aminated polyethylene terephthalate (PET) nanofibers for the selective removal of Pb(II) from polluted water. Materials, 10(12), 1352. https://doi.org/10.3390/ma10121352
   Web of Science ®Google Scholar
• Mirjalili, M., & Zohoori, S. (2016). Review for application of electrospinning and electrospun nanofibers technology in textile industry. Journal of Nanostructure in Chemistry, 6(3), 207–213. https://doi.org/10.1007/s40097-016-0189-y
   Web of Science ®Google Scholar
• Naksuwan, P., Sasithorn, N., Komárek, M., Salačová, J., & Militký, J. (2015). Recycled poly (ethylene terephthalate) fibers from PET bottle via electro spinning. Workshop Svetlanka, September
   Google Scholar
• Opálková Šišková, A., Frajová, J., & Nosko, M. (2020). Recycling of poly(ethylene terephthalate) by electrospinning to enhanced the filtration efficiency. Materials Letters, 278, 128426. https://doi.org/10.1016/j.matlet.2020.128426
   Web of Science ®Google Scholar
• Pise, D. D., Ahuja, B. B., & Shendokar, S. M. (2013). Study of process parameters affecting the diameter and morphology of electrospun polyvinylidene fluoride (PVDF) nanofibers. International Journal of Science & Research (IJSR), 4(6), 155–160.
   Google Scholar
• Rabbi, A.,Bahrambeygi, H.,Nasouri, K.,Shoushtari, A. M., &Babaei, M. R. (2014). Manufacturing of PAN or PU nanofiber layers/PET nonwoven composite as highly effective sound absorbers. Advances in Polymer Technology, 33(4), 1–8. https://doi.org/10.1002/adv.21425.
   Web of Science ®Google Scholar
• Rodoplu, D., & Mutlu, M. (2012). Effects of electrospinning setup and process parameters on nanofiber morphology intended for the modification of quartz crystal microbalance surfaces. Journal of Engineered Fibers & Fabrics, 7(2), 155892501200700–155892501200123. https://doi.org/10.1177/155892501200700217
   Web of Science ®Google Scholar
• Shahabadi, S. M. S., Kheradmand, A., Montazeri, V., & Ziaee, H. (2015). Effects of process and ambient parameters on diameter and morphology of electrospun polyacrylonitrile nanofibers. Polymer Science Series A, 57(2), 155–167. https://doi.org/10.1134/S0965545X15020157
   Web of Science ®Google Scholar
• Sirin, Ş., Çetiner, S., & Saraç, A. S. (2013). Polymer nanofibers via electrospinning: Factors affecting nanofiber quality. KSU: Journal of Engineering Sciences, 16(2), 1–12.
   Google Scholar
• Son, W. K., Ho Youk, J., Seung Lee, T., & Park, W. H. (2005). Effect of pH on electrospinning of poly(vinyl alcohol). Materials Letters, 59(12), 1571–1575. https://doi.org/10.1016/j.matlet.2005.01.025
   Web of Science ®Google Scholar
• Strain, I. N., Wu, Q., Pourrahimi, A. M., Hedenqvist, M. S., Olsson, R. T., & Andersson, R. L. (2015). Electrospinning of recycled PET to generate tough mesomorphic fibre membranes for smoke filtration. Journal of Materials Chemistry A, 3(4), 1632–1640. https://doi.org/10.1039/C4TA06191H
   Web of Science ®Google Scholar
• Vaz, B., da, S., Costa, J. A. V., & de Morais, M. G. (2017). Production of polymeric nanofibers with different conditions of the electrospinning process. Revista Materia, 22(2), 11–15. https://doi.org/10.1590/s1517-707620170002.0180
   Google Scholar
• Veleirinho, B., Rei, M. F., & Lopes-Da-Silva, J. A. (2008). Solvent and concentration effects on the properties of electrospun poly(ethylene terephthalate) nanofiber mats. Journal of Polymer Science Part B: Polymer Physics, 46(5), 460–471. https://doi.org/10.1002/polb
   Web of Science ®Google Scholar
• Yan, J. K., Liu, Y. B., Zhang, Z. H., Ma, Y., Song, X. L., & Chen, G. G. (2013). Preparation of electrospun PET nanofiber membrane and characterization of its waterproof and vapor permissible. Journal of Tianjin Polytechnic University, 32(6), 14–18.
   Google Scholar
• Yasin, S. A., Abbas, J. A., Ali, M. M., Saeed, I. A., & Ahmed, I. H. (2020). Methylene blue photocatalytic degradation by TiO2 nanoparticles supported on PET nanofibres. Materials Today: Proceedings, 20, 482–487.10.1016/j.matpr.2019.09.174.
   Google Scholar
• Zander, N. E., Gillan, M., & Sweetser, D. (2016). Recycled PET nanofibers for water filtration applications. Materials, 9(4), 247–210. 10.3390/ma9040247
   PubMed Web of Science ®Google Scholar
• Zargham, S., Bazgir, S., Tavakoli, A., Rashidi, A. S., & Damerchely, R. (2012). The effect of flow rate on morphology and deposition area of electrospun nylon 6 nanofiber. Journal of Engineered Fibers & Fabrics, 7(4), . 5892501200700–155892501200749 10.1177/155892501200700414.[Mismatch]
   Web of Science ®Google Scholar
• Zhu, G., Zhao, L. Y., Zhu, L. T., Deng, X. Y., & Chen, W. L. (2017). Effect of experimental parameters on nanofiber diameter from electrospinning with wire electrodes. IOP Conference Series: Materials Science & Engineering, 230(1), 12043. https://doi.org/10.1088/1757-899X/230/1/012043
   Google Scholar