Coloration of polycaprolactone nanofibers by continuous and semicontinuous methods

References

• Ahmed, M. K., Menazea, A. A., & Abdelghany, A. M. (2020). Blend biopolymeric nanofibrous scaffolds of cellulose acetate/ε-polycaprolactone containing metallic nanoparticles prepared by laser ablation for wound disinfection applications. International Journal of Biological Macromolecules, 155, 636–644. https://doi.org/10.1016/j.ijbiomac.2020.03.257
   PubMed Web of Science ®Google Scholar
• Benhacine, F., Ouargli, A., & Hadj-Hamou, A. S. (2019). Preparation and characterization of novel food packaging materials based on biodegradable PCL/Ag-kaolinite nanocomposites with controlled release properties. Polymer-Plastics Technology and Materials, 58(3), 328–340. https://doi.org/10.1080/03602559.2018.1471714
   Web of Science ®Google Scholar
• Correa, A. C., Carmona, V. B., Simão, J. A., Capparelli Mattoso, L. H., & Marconcini, J. M. (2017). Biodegradable blends of urea plasticized thermoplastic starch (UTPS) and poly (ε-caprolactone) (PCL): Morphological, rheological, thermal and mechanical properties. Carbohydrate Polymers, 167, 177–184. https://doi.org/10.1016/j.carbpol.2017.03.051
   PubMed Web of Science ®Google Scholar
• Evlashin, S., Dyakonov, P., Tarkhov, M., Dagesyan, S., Rodionov, S., Shpichka, A., Kostenko, M., Konev, S., Sergeichev, I., Timashev, P., & Akhatov, I. (2019). Flexible polycaprolactone and polycaprolactone/graphene scaffolds for tissue engineering. Materials, 12(18), 2991. https://doi.org/10.3390/ma12182991
   PubMed Web of Science ®Google Scholar
• Fakhrali, A., Poursharifi, N., Nasari, M., Semnani, D., Salehi, H., Ghane, M., & Mohammadi, S. (2021). Fabrication and characterization of PCL/Gel nanofibrous scaffolds incorporated with graphene oxide applicable in cardiac tissue engineering. Polymer-Plastics Technology and Materials, 60(18), 2025–2041.
   Web of Science ®Google Scholar
• Fonseca, C. P., Cavalcante, F., Amaral, F. A., Souza, C. Z., & Neves, S. (2007). Thermal and conduction properties of a PCL-biodegradable gel polymer electrolyte with LiClO4, LiF3CSO3, and LiBF4 salts. International Journal of Electrochemical Science, 2(2007), 52.
   Google Scholar
• Gao, Y., Sim, K., Yan, X., Jiang, J., Xie, J., & Yu, C. (2017). Thermally triggered mechanically destructive electronics based on electrospun poly (ε-caprolactone) nanofibrous polymer films. Scientific Reports, 7(1), 1–8. https://doi.org/10.1038/s41598-017-01026-6
   PubMedGoogle Scholar
• Gong, C., Shi, S., Wu, L., Gou, M., Yin, Q., Guo, Q., Dong, P., Zhang, F., Luo, F., Zhao, X., Wei, Y., & Qian, Z. (2009). Biodegradable in situ gel-forming controlled drug delivery system based on thermosensitive PCL–PEG–PCL hydrogel. Part 2: Sol–gel–sol transition and drug delivery behavior. Acta Biomaterialia, 5(9), 3358–3370. https://doi.org/10.1016/j.actbio.2009.05.025
   PubMed Web of Science ®Google Scholar
• Gutiérrez, T. J., Mendieta, J. R., & Ortega-Toro, R. (2021). In-depth study from gluten/PCL-based food packaging films obtained under reactive extrusion conditions using chrome octanoate as a potential food grade catalyst. Food Hydrocolloids. 111, 106255. https://doi.org/10.1016/j.foodhyd.2020.106255
   Web of Science ®Google Scholar
• Habibi, S., Saket, M., Nazockdast, H., & Hajinasrollah, K. (2019). Fabrication and characterization of exfoliated chitosan–gelatin–montmorillonite nanocomposite nanofibers. Journal of the Textile Institute, 110(11), 1672–1677. https://doi.org/10.1080/00405000.2019.1613029
   Web of Science ®Google Scholar
• Hivechi, A., Bahrami, S. H., Siegel, R. A., B.Milan, P., & Amoupour, M. (2020). In vitro and in vivo studies of biaxially electrospun poly (caprolactone)/gelatin nanofibers, reinforced with cellulose nanocrystals, for wound healing applications. Cellulose, 27(9), 5179–5196. https://doi.org/10.1007/s10570-020-03106-9
   Web of Science ®Google Scholar
• Huang, X., Jiao, T., Liu, Q., Zhang, L., Zhou, J., Li, B., & Peng, Q. (2019). Hierarchical electrospun nanofibers treated by solvent vapor annealing as air filtration mat for high-efficiency PM2. 5 capture. Science China Materials, 62(3), 423–436. https://doi.org/10.1007/s40843-018-9320-4
   Web of Science ®Google Scholar
• Hwang, T. I., Kim, J. I., Joshi, M. K., Park, C. H., & Kim, C. S. (2019). Simultaneous regeneration of calcium lactate and cellulose into PCL nanofiber for biomedical application. Carbohydrate Polymers, 212, 21–29. https://doi.org/10.1016/j.carbpol.2019.01.085
   PubMed Web of Science ®Google Scholar
• Jatoi, A. W. (2021). Coloration of electrospun polystyrene (PS) microfibers by the continuous dyeing method. The Journal of the Textile Institute, 112(6), 864–869. https://doi.org/10.1080/00405000.2020.1783779
   Web of Science ®Google Scholar
• Jatoi, A. W., Gianchandani, P. K., Kim, I. S., & Ni, Q.-Q. (2019). Sonication induced effective approach for coloration of compact polyacrylonitrile (PAN) nanofibers. Ultrasonics Sonochemistry, 51, 399–405. https://doi.org/10.1016/j.ultsonch.2018.07.035
   PubMed Web of Science ®Google Scholar
• Jatoi, A. W., Kim, I. S., & Ni, Q.-Q. (2018). Ultrasonic energy-assisted coloration of polyurethane nanofibers. Applied Nanoscience, 8(6), 1505–1514. https://doi.org/10.1007/s13204-018-0823-8
   Web of Science ®Google Scholar
• Jatoi, A. W., Ogasawara, H., Kim, I. S., & Ni, Q.-Q. (2019). Dopa-based facile procedure to synthesize AgNP/cellulose nanofiber composite for antibacterial applications. Applied Nanoscience, 9(8), 1661–1670. https://doi.org/10.1007/s13204-019-00952-3
   Web of Science ®Google Scholar
• Jatoi, A. W., Ogasawara, H., Kim, I. S., & Ni, Q.-Q. (2020). Cellulose acetate/multi-wall carbon nanotube/Ag nanofiber composite for antibacterial applications. Materials Science & Engineering C, Materials for Biological Applications, 110, 110679.
   PubMed Web of Science ®Google Scholar
• Jing, L., Sun, M., Xu, P., Yao, K., Yang, J., Wang, X., Liu, H., Sun, M., Sun, Y., Ni, R., Sun, J., & Huang, D. (2021). Noninvasive in vivo imaging and monitoring of 3D-printed polycaprolactone scaffolds labeled with an NIR region II fluorescent dye. ACS Applied Bio Materials, 4(4), 3189–3202. https://doi.org/10.1021/acsabm.0c01587
   PubMedGoogle Scholar
• KarbalaeiMahdi, A., Shahrousvand, M., Javadi, H. R., Ghollasi, M., Norouz, F., Kamali, M., & Salimi, A. (2017). Neural differentiation of human induced pluripotent stem cells on polycaprolactone/gelatin bi-electrospun nanofibers. Materials Science & Engineering C, Materials for Biological Applications, 78, 1195–1202. https://doi.org/10.1016/j.msec.2017.04.083
   PubMed Web of Science ®Google Scholar
• Khatri, Z., Jatoi, A. W., Ahmed, F., & Kim, I.-S. (2016). Cell adhesion behavior of poly (ε-caprolactone)/poly (L-lactic acid) nanofibers scaffold. Materials Letters, 171, 178–181. https://doi.org/10.1016/j.matlet.2016.02.061
   Web of Science ®Google Scholar
• Kulkarni, A., Bambole, V. A., & Mahanwar, P. A. (2010). Electrospinning of polymers, their modeling and applications. Polymer-Plastics Technology and Engineering, 49(5), 427–441. https://doi.org/10.1080/03602550903414019
   Web of Science ®Google Scholar
• Krishna Kumar, G., Radhakrishnan, P., Anila, E. I., Sreelatha, K. S., & Sajeev, U. S. (2015). A study on the optical properties of dye doped polycaprolactone microstructures. Aquinas Journal of Multidisciplinary Research, 1(2015), 1–8.
   Google Scholar
• Kumar, N., Mahale, B., Muzata, T. S., & Ranjan, R. (2021). Energy harvesting with flexible piezocomposite fabricated from a biodegradable polymer. International Journal of Energy Research, 45(13), 19395–19404. https://doi.org/10.1002/er.7069
   Web of Science ®Google Scholar
• Low, K., Horner, C. B., Li, C., Ico, G., Bosze, W., Myung, N. V., & Nam, J. (2015). Composition-dependent sensing mechanism of electrospun conductive polymer composite nanofibers. Sensors and Actuators B: Chemical, 207, 235–242. https://doi.org/10.1016/j.snb.2014.09.121
   Web of Science ®Google Scholar
• Luo, L., Yan, L., Amirshaghaghi, A., Wei, Y., You, T., Singhal, S., Tsourkas, A., & Cheng, Z. (2020). Indocyanine green-coated polycaprolactone micelles for fluorescence imaging of tumors. ACS Applied Bio Materials, 3(4), 2344–2349. https://doi.org/10.1021/acsabm.0c00091
   PubMedGoogle Scholar
• Manjula, R., & Rajiv, S. (2017). Development and assessment of electrospun poly (ε-caprolactone)–poly (vinylalcohol) blend nanofibers for pest control in stored products. Polymer-Plastics Technology and Engineering, 56(18), 1949–1960. https://doi.org/10.1080/03602559.2017.1298794
   Web of Science ®Google Scholar
• Masoumi, S., Amiri, S., & Bahrami, S. H. (2018). PCL-based nanofibers loaded with ciprofloxacin/cyclodextrin containers. The Journal of the Textile Institute, 109(8), 1044–1053. https://doi.org/10.1080/00405000.2017.1398625
   Web of Science ®Google Scholar
• Mi, H.-Y., Jing, X., Peng, J., Salick, M. R., Peng, X.-F., & Turng, L.-S. (2014). Poly (ε-caprolactone)(PCL)/cellulose nano-crystal (CNC) nanocomposites and foams. Cellulose, 21(4), 2727–2741. https://doi.org/10.1007/s10570-014-0327-y
   Web of Science ®Google Scholar
• Nouri, M., Abbasi, M., Seraj, M., & Mehraz, L. (2021). Fabrication and characterization of drug-loaded wet spun polycaprolactone fibers. The Journal of the Textile Institute, 112(3), 462–469. https://doi.org/10.1080/00405000.2020.1764773
   Web of Science ®Google Scholar
• Prajongtat, P., Sriprachuabwong, C., Wongkanya, R., Dechtrirat, D., Sudchanham, J., Srisamran, N., Sangthong, W., Chuysinuan, P., Tuantranont, A., Hannongbua, S., & Chattham, N. (2019). Moisture-resistant electrospun polymer membranes for efficient and stable fully printable perovskite solar cells prepared in humid air. ACS Applied Materials & Interfaces, 11(31), 27677–27685. https://doi.org/10.1021/acsami.9b05032
   PubMed Web of Science ®Google Scholar
• Quan, L., Sun, T., Wei, Y., Lin, Y., Gong, T., Pan, C., Ding, H., Liu, W., & Xie, Z. (2019). Poly (ε-caprolactone) modified organic dyes nanoparticles for noninvasive long term fluorescence imaging. Colloids and Surfaces B, Biointerfaces, 173, 884–890. https://doi.org/10.1016/j.colsurfb.2018.10.065
   PubMed Web of Science ®Google Scholar
• Radwan, H. A., Ismail, R. A., Abdelaal, S. A., Al Jahdaly, B. A., Almahri, A., Ahmed, M. K., & Shoueir, K. (2022). Electrospun polycaprolactone nanofibrous webs containing Cu–Magnetite/Graphene Oxide for cell viability, antibacterial performance, and dye decolorization from aqueous solutions. Arabian Journal for Science and Engineering, 47(1), 303–318. https://doi.org/10.1007/s13369-021-05363-7
   Web of Science ®Google Scholar
• Song, J. H., Murphy, R. J., Narayan, R., & Davies, G. B. H. (2009). Biodegradable and compostable alternatives to conventional plastics. Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences, 364(1526), 2127–2139. https://doi.org/10.1098/rstb.2008.0289
   PubMed Web of Science ®Google Scholar
• Tol, S., Degertekin, F. L., & Erturk, A. (2016). Gradient-index phononic crystal lens-based enhancement of elastic wave energy harvesting. Applied Physics Letters, 109(6), 063902. https://doi.org/10.1063/1.4960792
   Web of Science ®Google Scholar
• Van der Schueren, L., De Meyer, T., Steyaert, I., Ceylan, Ö., Hemelsoet, K., Van Speybroeck, V., & De Clerck, K. (2013). Polycaprolactone and polycaprolactone/chitosan nanofibres functionalised with the pH-sensitive dye Nitrazine Yellow. Carbohydrate Polymers, 91(1), 284–293. https://doi.org/10.1016/j.carbpol.2012.08.003
   PubMed Web of Science ®Google Scholar
• Voniatis, C., Barczikai, D., Gyulai, G., & Jedlovszky-Hajdu, A. (2021). Fabrication and characterisation of electrospun polycaprolactone/polysuccinimide composite meshes. Journal of Molecular Liquids, 323, 115094. https://doi.org/10.1016/j.molliq.2020.115094
   Web of Science ®Google Scholar
• Wahab, J. A., & Mamun, S. A. (2020). Polyacrylonitrile nanofiber mats containing titania/AgNP composite nanoparticles for antibacterial applications. Materials Research Express, 7(1), 015416. https://doi.org/10.1088/2053-1591/ab6c26
   Web of Science ®Google Scholar
• Wan, L. Y. (2018). Nanofibers for smart textiles. Smart Textiles: Wearable Nanotechnology, 39–90.
   Google Scholar
• Wang, X., Hu, H., Yang, Z., He, L., Kong, Y., Fei, B., & Xin, J. H. (2014). Smart hydrogel-functionalized textile system with moisture management property for skin application. Smart Materials and Structures, 23(12), 125027. https://doi.org/10.1088/0964-1726/23/12/125027
   Web of Science ®Google Scholar
• Ye, D., Ding, Y., Duan, Y., Su, J., Yin, Z., & Huang, Y. A. (2018). Large‐scale direct‐writing of aligned nanofibers for flexible electronics. Small, 14(21), 1703521. https://doi.org/10.1002/smll.201703521
   Web of Science ®Google Scholar
• Zhang, Z., Gong, W., Bai, Z., Wang, D., Xu, Y., Li, Z., Guo, J., & Turng, L.-S. (2019). Oxygen-rich polymers as highly effective positive tribomaterials for mechanical energy harvesting. ACS Nano. 13(11), 12787–12797.
   PubMed Web of Science ®Google Scholar
• Zhang, Z., Jørgensen, M. L., Wang, Z., Amagat, J., Wang, Y., Li, Q., Dong, M., & Chen, M. (2020). 3D anisotropic photocatalytic architectures as bioactive nerve guidance conduits for peripheral neural regeneration. Biomaterials, 253, 120108. https://doi.org/10.1016/j.biomaterials.2020.120108
   PubMed Web of Science ®Google Scholar