The effects of hollow yarn and fabric structure on permeability and moisture management properties of woven fabrics

References

• Alasehirli, G. (2009). An investigation of hollow yarn manufacturing techniques on ring spinning machine and evaluation of yarn properties. Suleyman Demirel University, Institute of Natural and Applied Sciences.
   Google Scholar
• Aytac, I. (2016). Mechanical properties of hollow yarns and comfort properties of fabrics produced with these yarns. Namık Kemal University, Graduate School of Applied Sciences, Department of Textile Engineering.
   Google Scholar
• Aytac, I., & Gurkan Unal, P. (2018). The effect of core-sheath proportion on the characteristics of fabrics produced with hollow yarns: Part II comfort and mechanical properties. The Journal of the Textile Institute, 109(7), 975–982. https://doi.org/10.1080/00405000.2017.1394783
   Web of Science ®Google Scholar
• Baltušnikaitė, J., Abraitienė, A., Stygienė, L., Krauledas, S., Rubežienė, V., & Varnaitė-Žuravliova, S. (2014). Investigation of moisture transport properties of knitted materials intended for warm underwear. Fibres & Textiles in Eastern Europe, 22(4(106)), 93–100.
   Web of Science ®Google Scholar
• Celep, G. (2015). A novel study of developing models of comfort properties of textile products made of hollow yarns. Usak University, Graduate School of Natural and Applied Sciences.
   Google Scholar
• Celep, G., & Yuksekkaya, M. E. (2016). Comparison of thermal comfort properties of single jersey fabrics produced by hollow yarns with different hollowness ratio. The Journal of the Textile Institute, 108(2), 1–7. https://doi.org/10.1080/00405000.2016.1160763
   Web of Science ®Google Scholar
• Chandrasekaran, V., Senthilkumar, P., & Sakthivel, J. C. (2018). Study on moisture management properties of micro-pore ring-spun viscose yarn-plated knitted fabrics. The Journal of the Textile Institute, 109(11), 1458–1464. https://doi.org/10.1080/00405000.2018.1423884
   Web of Science ®Google Scholar
• Chen, Q., Tang, K. M., Ma, P., & Jiang, G. (2016). Evaluation of water absorption and transport properties of weft knitted polyester fabrics by spontaneous uptake water transport tester and conventional test methods. Fibers and Polymers, 17(8), 1287–1295. https://doi.org/10.1007/s12221-016-6454-3
   Web of Science ®Google Scholar
• Cruz, J., Leitão, A., Silveira, D., Pichandi, S., Pinto, M., & Fangueiro, R. (2017). Study of moisture absorption characteristics of cotton terry towel fabrics. Procedia Engineering, 200, 389–398. https://doi.org/10.1016/j.proeng.2017.07.055
   Google Scholar
• Das, B., Das, A., Kothari, V. K., Fanguiero, R., & Araújo, M. (2007). Moisture transmission through textiles. Part I: Processes involved in moisture transmission and the factors at play. AUTEX Research Journal, 7(2), 100–110.
   Google Scholar
• Eker, P. (2011). Bio-polishing on woven fabrics with lycra that contain different raw materials and effects of bio-polishing to fabric performance. The University of Cukurova, Institute of Natural and Applied Sciences.
   Google Scholar
• Fangueiro, R., Gonçalves, P., Sountinho, F., & Freitas, C. (2009). Moisture management performance of functional yarns based on wool fibres. Indian Journal of Fibre & Textile Research, 34, 315–320.
   Web of Science ®Google Scholar
• Gao, S., Cui, Y., Yao, W., Jing, M., Liu, L., & Zhang, R. (2022). Analysis of thermal and wet comfort properties of hygroscopic and exothermic knitted fabrics. Textile Research Journal, 92(13–14), 2327–2339. https://doi.org/10.1177/00405175221076030
   Web of Science ®Google Scholar
• Ishtiaque, S. M., Das, A., & Singh, R. P. (2008). Packing of micro-porous yarns: Part I. Optimization of yarn characteristics. Journal of the Textile Institute, 99(2), 147–155. https://doi.org/10.1080/00405000701559685
   Web of Science ®Google Scholar
• Legerská, J., Ondrušová, D., & Krmela, J. (2020). Evaluation of thermal insulation properties and dynamic moisture transfer of knitted fabrics. IOP Conference Series: Materials Science and Engineering, 776(1), 012100. https://doi.org/10.1088/1757-899X/776/1/012100
   Google Scholar
• Lolaki, A., Shanbeh, M., & Borhani, S. (2017). Effect of structural parameters of porous yarns and fabric on air permeability and moisture transfer of double-face woven fabrics. The Journal of the Textile Institute, 108(6), 992–1000. https://doi.org/10.1080/00405000.2016.1207270
   Web of Science ®Google Scholar
• Mukhopadhyay, A., Ishtiaque, S. M., & Uttam, D. (2011). Impact of structural variations in hollow yarn on heat and moisture transport properties of fabrics. Journal of the Textile Institute, 102(8), 700–712. https://doi.org/10.1080/00405000.2010.515104
   Web of Science ®Google Scholar
• Namligoz, E. S., Coban, S., & Bahtiyari, M. I. (2010). Comparison of moisture transport properties of the various woven fabrics. Textile and Apparel, 2, 93–100.
   Google Scholar
• Oner, E. (2008). A research about comfort properties of woven fabrics. Pamukkale University, Graduate School of Natural and Applied Science.
   Google Scholar
• Ozdil, N. (2007). A study on thermal comfort properties of socks. Textile and Apparel, 2, 154–158.
   Google Scholar
• Ozdil, N., Ozcelik, G., Supuren, G., & Pruchova, J. (2009). A study on the moisture transport properties of the cotton knitted fabrics in single jersey structure. Textile and Apparel, 3, 218–223.
   Google Scholar
• Ozdogan, E. (2006). The effect of plasma treatment over the adhesion property of polyamide 6 fabrics. Textile and Apparel, 16(2), 128–133.
   Google Scholar
• Ozgen, B., & Altas, S. (2014). The investigation of thermal comfort, moisture management and handle properties of knitted fabrics made of various fibres. Textile and Apparel, 24(3), 272–278.
   Google Scholar
• Perincek, S. D. (2006). An investigation on the applicability of ultrasound, ultraviolet, ozone and combination of these technologies as a pretreatment process. Ege University, Graduate School of Natural and Applied Science.
   Google Scholar
• Saricam, C., & Kalaoglu, F. (2014). Investigation of the wicking and drying behaviour of polyester woven fabrics. Fibres & Textiles in Eastern Europe, 22(3(105)), 73–78.
   Web of Science ®Google Scholar
• Sharma, N., Kumar, P., Bhatia, D., & Sinha, S. (2016). Moisture management behaviour of knitted fabric from structurally modified ring and vortex spun yarn. Journal of the Institution of Engineers (India): Series E, 97(2), 123–129. https://doi.org/10.1007/s40034-015-0075-z
   Google Scholar
• Supuren, G., Oglakcioglu, N., Ozdil, N., & Marmarali, A. (2011). Moisture management and thermal absorptivity properties of double-face knitted fabrics. Textile Research Journal, 81(13), 1320–1330. https://doi.org/10.1177/0040517511402122
   Web of Science ®Google Scholar
• Tang, K. M., Kan, C. W., & Fan, J. (2014). Evaluation of water absorption and transport property of fabrics. Textile Progress, 46(1), 1–132. https://doi.org/10.1080/00405167.2014.942582
   Google Scholar
• Unal, B. Z. (2007). Optimization of the production parameters and performance properties of woven towels. The University of Cukurova, Institute of Natural and Applied Sciences.
   Google Scholar
• Yuksel, H. G., & Okur, A. (2011). Relationships between subjective comfort evaluations and laboratory tests. Tekstil ve Muhendis, 18(84), 38–48. https://dergipark.org.tr/tr/pub/teksmuh/issue/12865/156017
   Google Scholar