Development and characterization of hybrid polymer composite materials with reinforcement of glass/carbon fibers for enhanced mechanical properties: an experimental and numerical approach

References

• Alves, M., Junior, C. C., & Ha, S. K. (2021). Fiber waviness and its effect on the mechanical performance of fiber reinforced polymer composites: An enhanced review. Composites A, 149, 106526. https://doi.org/10.1016/j.compositesa.2021.106526
   Web of Science ®Google Scholar
• Bhagwat, P., Ramachandran, M., & Raichurkar, P. (2017). Mechanical properties of hybrid glass/carbon fiber reinforced epoxy composites. Materials Today Proceedings, 4(8), 7375–7380. https://doi.org/10.1016/j.matpr.2017.07.067
   Google Scholar
• Cavatorta, M. (2007). A comparative study of the fatigue and post-fatigue behavior of carbon–glass/epoxy hybrid RTM and hand lay-up composites. Journal of Materials Science, 42(20), 8636–8644. https://doi.org/10.1007/s10853-007-1847-8
   Web of Science ®Google Scholar
• Chaudhary, S., Singh, K., & Venugopal, R. (2018). Experimental and numerical analysis of flexural test of unfilled glass fiber reinforced polymer composite laminate. Materials Today, 5(1), 184–192. https://doi.org/10.1016/j.matpr.2017.11.070
   Google Scholar
• Das, S. (2001). The cost of automotive polymer composites: A review and assessment of DOE's lightweight materials composites research. Vol. 47. Oak Ridge National Laboratory Oak Ridge.
   Google Scholar
• Gr, A., Sanjay, M., & Yogesha, B. (2014). Review on comparative evaluation of fiber reinforced polymer matrix composites. Carbon, 4000, 30.
   Google Scholar
• Gururaja, M., & Rao, A. H. (2012). A review on recent applications and future prospectus of hybrid composites. International Journal of Soft Computing and Engineering, 1(6), 352–355.
   Google Scholar
• Hosur, M., Adbullah, M., & Jeelani, S. (2005). Studies on the low-velocity impact response of woven hybrid composites. Composite Structures, 67(3), 253–262. https://doi.org/10.1016/j.compstruct.2004.07.024
   Web of Science ®Google Scholar
• Hwang, S.-F., & Mao, C.-P. (2001). Failure of delaminated interply hybrid composite plates under compression. Composites Science and Technology, 61(11), 1513–1527. https://doi.org/10.1016/S0266-3538(01)00048-3
   Web of Science ®Google Scholar
• Jagannatha, T., & Harish, G. (2015). Influence of carbon & glass fiber reinforcements on flexural strength of epoxy matrix polymer hybrid composites. International Journal of Engineering Research and Applications, 5(4), 109–112.
   Google Scholar
• Jagannatha, T., & Harish, G. (2015). Mechanical properties of carbon/glass fiber reinforced epoxy hybrid polymer composites. International Journal of Mechanical Engineering and Robotics Research, 4(2), 131–137.
   Google Scholar
• Jesthi, D. K., & Nayak, R. K. (2019a). Evaluation of mechanical properties and morphology of seawater aged carbon and glass fiber reinforced polymer hybrid composites. Composites Part B: Engineering, 174, 106980. https://doi.org/10.1016/j.compositesb.2019.106980
   Web of Science ®Google Scholar
• Jesthi, D. K., & Nayak, R. K. (2019b). Improvement of mechanical properties of hybrid composites through interply rearrangement of glass and carbon woven fabrics for marine application. Composites B, 168, 467–475. https://doi.org/10.1016/j.compositesb.2019.03.042
   Google Scholar
• Khalid, M. Y., Al Rashid, A., Arif, Z. U., Sheikh, M. F., Arshad, H., & Nasir, M. A. (2021). Tensile strength evaluation of glass/jute fibers reinforced composites: An experimental and numerical approach. Results in Engineering, 10, 100232. https://doi.org/10.1016/j.rineng.2021.100232
   Google Scholar
• Khalid, M. Y., Nasir, M. A., Ali, A., Al Rashid, A., & Khan, M. R. (2020). Experimental and numerical characterization of tensile property of jute/carbon fabric reinforced epoxy hybrid composites. SN Applied Sciences, 2(4), 577. https://doi.org/10.1007/s42452-020-2403-2
   Web of Science ®Google Scholar
• Mahdi, E., Hamouda, A. M. S., Sahari, B. B., & Khalid, Y. A. (2003). Effect of hybridisation on crushing behaviour of carbon/glass fibre/epoxy circular–cylindrical shells. Journal of Materials Processing Technology, 132(1-3), 49–57. https://doi.org/10.1016/S0924-0136(02)00260-1
   Web of Science ®Google Scholar
• Naresh, K., Shankar, K., Rao, B. S., & Velmurugan, R. (2016). Effect of high strain rate on glass/carbon/hybrid fiber reinforced epoxy laminated composites. Composites B, 100, 125–135. https://doi.org/10.1016/j.compositesb.2016.06.007
   Google Scholar
• Nirbhay, M., Dixit, A., Misra, R. K., & Mali, H. S. (2014). Tensile test simulation of CFRP test specimen using finite elements. Procedia Materials Science, 5, 267–273. https://doi.org/10.1016/j.mspro.2014.07.266
   Google Scholar
• Nordin, H., & Täljsten, B. (2004). Testing of hybrid FRP composite beams in bending. Composites Part B: Engineering, 35(1), 27–33. https://doi.org/10.1016/j.compositesb.2003.08.010
   Web of Science ®Google Scholar
• Rafiquzzaman, M., Islam, M., Rahman, H., Talukdar, S., & Hasan, N. (2016). Mechanical property evaluation of glass–jute fiber reinforced polymer composites. Polymers for Advanced Technologies, 27(10), 1308–1316. https://doi.org/10.1002/pat.3798
   Web of Science ®Google Scholar
• Singh, M., Dodla, S., & Gautam, R. (2024). Mechanical and tribological properties of CNTs coated aramid fiber-reinforced epoxy composites. Composites A, 179, 108061. https://doi.org/10.1016/j.compositesa.2024.108061
   Web of Science ®Google Scholar
• Tsai, C-h., Zhang, C., Jack, D. A., Liang, R., & Wang, B. (2011). The effect of inclusion waviness and waviness distribution on elastic properties of fiber-reinforced composites. Composites B, 42(1), 62–70. https://doi.org/10.1016/j.compositesb.2010.09.004
   Google Scholar
• Venkateshaiah, A., Padil, V. V. T., Nagalakshmaiah, M., Waclawek, S., Černík, M., & Varma, R. S. (2020). Microscopic techniques for the analysis of micro and nanostructures of biopolymers and their derivatives. Polymers, 12(3), 512. https://doi.org/10.3390/polym12030512
   PubMed Web of Science ®Google Scholar
• Yadav, R., Singh, M., Shekhawat, D., Lee, S.-Y., & Park, S.-J. (2023). The role of fillers to enhance the mechanical, thermal, and wear characteristics of polymer composite materials: A review. Composites A, 175, 107775. https://doi.org/10.1016/j.compositesa.2023.107775
   Web of Science ®Google Scholar
• Zhang, J., Chaisombat, K., He, S., & Wang, C. H. (2012). Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures. Materials & Design, 36, 75–80. https://doi.org/10.1016/j.matdes.2011.11.006
   Web of Science ®Google Scholar
• Zhang, J., Lin, G., Vaidya, U., & Wang, H. (2022). Past, present and future prospective of global carbon fibre composite developments and applications. Composites B, 250, 110463. https://doi.org/10.1016/j.compositesb.2022.110463
   Google Scholar