References
- Carter FW. On the action of a locomotive driving wheel. Proc Roy Soc Ser A. 1926;112:151–157. doi: 10.1098/rspa.1926.0100
- Hertz H. Über die Berührung fester elastischer Körper [On the contact of elastic solids]. J Reine Angew Math. 1882;92:156–171 [German].
- Kalker JJ. Simplified theory of rolling contact. Delft Prog Rep Ser C. 1973;1:1–10.
- Kalker JJ. A fast algorithm for the simplified theory of rolling contact. Veh Syst Dyn. 1982;11:1–13. doi: 10.1080/00423118208968684
- Polach O. A fast wheel-rail forces calculation computer code. Proceedings of the 16th IAVSD symposium; 1999 August; Pretoria. Veh Syst Dyn Suppl. 1999;33:728–739.
- Polach O. Experience with use of a time saving method for wheel–rail forces calculation. Sci Pap Univ Pardubice Ser B. 1999;5:5–18.
- Vollebregt EAH. Refinement of Kalker's rolling contact model. Proceedings of the eighth international conference on contact mechanics and wear of rail/wheel systems; 2009 September; Florence. p. 149–156.
- Vollebregt EAH. 100-Fold speed-up of the normal contact problem and other recent developments in ‘CONTACT’. Proceedings of the ninth international conference on contact mechanics and wear of rail/wheel systems; 2012 August; Chengdu. p. 79–86.
- Kalker JJ. Three-dimensional elastic bodies in rolling contact. Dordrecht: Kluwer Academic; 1990.
- Kalker JJ. Wheel–rail rolling contact theory. Wear. 1991;144:243–261. doi: 10.1016/0043-1648(91)90018-P
- Iwnicki S, editor. Handbook of railway vehicle dynamics. Boca Raton, FL: CRC/Taylor & Francis; 2006
- Vollebregt EAH, Iwnicki SD, Xie G, Shackleton P. Assessing the accuracy of different simplified frictional rolling contact algorithms. Veh Syst Dyn. 2012;50(1):1–17. doi: 10.1080/00423114.2011.552618
- Yamashita M, Soeda T. Development of re-adhesion control method considering axle-weight transfer of electric locomotive. Q Rep Rail Teaching Res Inst. 2011;52(1):7–12.
- Lata M. The modern wheelset drive system and possibilities of modelling the torsion dynamics. Transport. 2008;23(2):172–181. doi: 10.3846/1648-4142.2008.23.172-181
- Ahmedov O, Zeman V, Byrtus M. Modelling of vibration and modal properties of electric locomotive drive. Eng Mech. 2012;19(2/3):165–176.
- Buscher M. Radschlupfregelung zur maximalen Kraftschlußausnutzung bei elektrischen Traktionsantrieben [Wheel slip control for maximum traction utilization with electric traction drives]. Aachen: Verlag Shaker; 1995 [German].
- Spiryagin M, Lee KS, Yoo HH. Control system for maximum use of adhesive forces of a railway vehicle in a tractive mode. Mech Syst Signal Process. 2008;22:709–720. doi: 10.1016/j.ymssp.2007.09.018
- Polach O. Influence of locomotive tractive effort on the forces between wheel and rail. Veh Syst Dyn Suppl. 2001;35:7–22.
- Polach O. Creep forces in simulations of traction vehicles running on adhesion limit. Wear. 2005;258:992–1000. doi: 10.1016/j.wear.2004.03.046
- Liu J, Zhao H, Zhai W. Mechanism of self-excited torsional vibration of locomotive driving system. Front Mech Eng China. 2010;5(4):465–469. doi: 10.1007/s11465-010-0115-9
- Voltr P, Lata M. Dynamical behaviour of a locomotive drive system at the adhesion limit – experiment and simulation. The 22nd international symposium on dynamics of vehicles on roads and tracks; 2011 August; Manchester.
- Fletcher DI, Lewis S. Creep curve measurement to support wear and adhesion modelling, using a continuously variable creep twin-disc machine. Wear. 2013;298–299:57–65. doi: 10.1016/j.wear.2012.11.065
- Bosso N, Zampieri N. Real-time implementation of a traction control algorithm on a scaled roller rig. Veh Syst Dyn. 2013;51(4):517–541. doi: 10.1080/00423114.2012.750001
- Zhang W, Chen J, Wu X, Jin X. Wheel/rail adhesion and analysis by using full scale roller rig. Wear. 2002;253:82–88. doi: 10.1016/S0043-1648(02)00086-8
- Harrison H, McCanney T, Cotter J. Recent developments in coefficient of friction measurement at the rail/wheel interface. Wear. 2002;253:114–123. doi: 10.1016/S0043-1648(02)00090-X
- Popovici R. Friction in wheel–rail contacts [Ph.D. dissertation]. Enschede: University of Twente; 2010.
- Fiehn H, Weinhardt M, Zeevenhooven N. Drehstromversuchsfahrzeug der Niederländischen Eisenbahnen – Adhäsionsmessungen [Three-phase experimental vehicle of the Dutch railways – Adhesion measurements]. Elektrische Bahnen. 1979;77(12):329–338 [German].
- Kalker JJ. Über die Mechanik des Kontaktes zwischen Rad und Schiene [On the mechanics of the contact of wheel and rail]. ZEV – Glasers Annalen. 1978;102(78):214–218 [German].
- Bucher F, Dmitriev AI, Ertz M, Knothe K, Popov VL, Psakhie SG, Shilko EV. Multiscale simulation of dry friction in wheel/rail contact. Wear. 2006;261:874–884. doi: 10.1016/j.wear.2006.01.046
- Tomberger C, Dietmaier P, Sextro W, Six K. Friction in wheel–rail contact: a model comprising interfacial fluids, surface roughness and temperature. Wear. 2011;271:2–12. doi: 10.1016/j.wear.2010.10.025
- Baek K-S, Kyogoku K, Nakahara T. An experimental study of transient traction characteristics between rail and wheel under low slip and low speed conditions. Wear. 2008;265:1417–1424. doi: 10.1016/j.wear.2008.02.044
- Gallardo-Hernandez EA, Lewis R. Twin disc assessment of wheel/rail adhesion. Wear. 2008;265:1309–1316. doi: 10.1016/j.wear.2008.03.020
- Li Z, Arias-Cuevas O, Lewis R, Gallardo-Hernandez EA. Rolling–sliding laboratory tests of friction modifiers in leaf contaminated wheel–rail contacts. Tribol Lett. 2009;33:97–109. doi: 10.1007/s11249-008-9393-3
- Savkoor AR, Ouwerkerk H. Tribological transitions due to heat dissipation during braking on contaminated rails. Wear. 1995;181–183:391–396. doi: 10.1016/0043-1648(95)90046-2
- Blau PJ. Embedding wear models into friction models. Tribol Lett. 2009;34:75–79. doi: 10.1007/s11249-008-9395-1
- Pugi L, Ridolfi A, Malvezzi M, Cangioli F, Rindi A. Three dimensional modelling of wheel–rail degraded adhesion conditions. The 22nd international symposium on dynamics of vehicles on roads and tracks; 2011 August; Manchester.
- Alotta B, Meli E, Ridolfi A, Rindi A. Development of an innovative wheel–rail contact model for the analysis of degraded adhesion in railway systems. Tribol Int. 2014;69:128–140. doi: 10.1016/j.triboint.2013.09.013
- Dellmann T, Viereck U. Dynamisches Kraftschluss-Schlupfmodell zur Beschreibung von Bremvorgängen [Dynamic model of slip-dependent frictional coefficient during braking], ZEVrail 132; 2008; Tagungsband SFT Graz 2008. p. 144–153 [German].
- Häse P, Menth S. Kraftschluß bei Triebfahrzeugen – Modellbildung und Verifikation an Meßdaten [Traction of powered vehicles – model development and verification against measured data]. Elektrische Bahnen. 1996;94(5):125–134. German.
- Voltr P, Lata M, Černý O. Measuring of wheel–rail adhesion characteristics at a test stand. The 18th international conference engineering mechanics 2012; 2012 May; Svratka. p. 1543–1553.
- Šimánek J, Novák J, Černý O, Doleček R. FOC and flux weakening for traction drive with permanent magnet synchronous motor. IEEE international symposium on industrial electronics ISIE 2008; 2008 June/July; Cambridge. p. 753–758.
- Ertz M, Bucher F. Improved creep force model for wheel/rail contact considering roughness and temperature. The 17th IAVSD symposium. Veh Syst Dyn Suppl. 2002;37:314–325.
- Ertz M. Kraftschluss und Materialbeanspruchung im Rad/Schiene-Kontakt aus heutiger Sicht [Creep forces and strain of the material in wheel/rail contact from today's point of view]. ZEVrail – Glasers Annalen. 2003;127(11–12):558–568 [German].