Axle box bearings on the high-Speed train: vibration characteristics analysis in the context of multi-source faults

References

• Ren ZS. An investigation on wheel/rail impact dynamics with a three-dimensional flat model. Veh Syst Dyn. 2019;57(3):369–388. doi:10.1080/00423114.2018.1469774
   Web of Science ®Google Scholar
• Wang C, Wang X, Luo SH, et al. Influences of high speed vehicle wheel flat on bogie’s vibration characteristics. China Mech Eng. 2017;28(02):246–251.
   Google Scholar
• Liu GY, Zeng J, Wu PB. Vibration characteristic analysis of vehicle systems due to wheel flat. J Mech Eng. 2020;58(8):182–189.
   Google Scholar
• Wu TX, Thompson DJ. A hybrid model for the noise generation due to railway wheel flats. J Sound Vib. 2002;251(1):115–139. doi:10.1006/jsvi.2001.3980
   Web of Science ®Google Scholar
• Yang JE, Thompson DJ. Time-domain prediction of impact noise from wheel flats based on measured profiles. J Sound Vib. 2014;333(17):3981–3995. doi:10.1016/j.jsv.2014.04.026
   Web of Science ®Google Scholar
• Bogdevicius M, Zygiene R, Bureika G, et al. An analytical mathematical method for calculation of the dynamic wheel–rail impact force caused by wheel flat. Veh Syst Dyn. 2016;54(5):689–705. doi:10.1080/00423114.2016.1153114
   Web of Science ®Google Scholar
• Bian J, Gu YT, Murray MH. A dynamic wheel–rail impact analysis of railway track under wheel flat by finite element analysis. Veh Syst Dyn. 2013;51(6):784–797. doi:10.1080/00423114.2013.774031
   Web of Science ®Google Scholar
• Bian J, Gu YT, Murray M. Numerical study of impact forces on railway sleepers under wheel flat. Adv Struct Eng. 2013;16(1):127–134. doi:10.1260/1369-4332.16.1.127
   Web of Science ®Google Scholar
• Bosso N, Gugliotta A, Zampieri N. Wheel flat detection algorithm for onboard diagnostic. Measurement. 2018;123:193–202. doi:10.1016/j.measurement.2018.03.072
   Web of Science ®Google Scholar
• Uzzal RUA, Ahmed AKW, Bhat RB. Modelling, validation and analysis of a three-dimensional railway vehicle–track system model with linear and nonlinear track properties in the presence of wheel flats. Veh Syst Dyn. 2013;51(11):1695–1721. doi:10.1080/00423114.2013.822987
   Web of Science ®Google Scholar
• Chen SQ, Wang KY, Chang C, et al. A two-level adaptive chirp mode decomposition method for the railway wheel flat detection under variable-speed conditions. J Sound Vib. 2021;498:115963. doi:10.1016/j.jsv.2021.115963
   Web of Science ®Google Scholar
• Song ZY, Xu HF, Song DL, et al. Effect analysis of wheel flat on dynamic performance and vibration transmission of railway freight cars. Railway Locomotive Car. 2022;42(04):1–8. (In Chinese).
   Google Scholar
• Xu JM, Ma QT, Zhao SQ, et al. Effect of wheel flat on dynamic wheel-rail impact in railway turnouts. Veh Syst Dyn. 2022;60(6):1829–1848. doi:10.1080/00423114.2021.1876888
   Web of Science ®Google Scholar
• Zhai WM, Gao JM, Liu PF, et al. Reducing rail side wear on heavy-haul railway curves based on wheel–rail dynamic interaction. Veh Syst Dyn. 2014;52(sup1):440–454. doi:10.1080/00423114.2014.906633
   Web of Science ®Google Scholar
• Bruni S, Collina A, Diana G, et al. Lateral dynamics of a railway vehicle in tangent track and curve: tests and simulation. Veh Syst Dyn. 1999;33(sup1):464–477. doi:10.1080/00423114.1999.12063104
   Web of Science ®Google Scholar
• Zboiński K. Dynamical investigation of railway vehicles on a curved track. Eur J Mech-A/Solids. 1998;17(6):1001–1020. doi:10.1016/S0997-7538(98)90506-X
   Web of Science ®Google Scholar
• Zboinski K, Dusza M. Development of the method and analysis for non-linear lateral stability of railway vehicles in a curved track. Veh Syst Dyn. 2006;44(sup1):147–157. doi:10.1080/00423110600869644
   Web of Science ®Google Scholar
• Zboinski K, Dusza M. Extended study of railway vehicle lateral stability in a curved track. Veh Syst Dyn. 2011;49(5):789–810. doi:10.1080/00423111003770447
   Web of Science ®Google Scholar
• Cha H, Ren Z, Ning X. Impact characteristics of axle box bearing due to wheel flat scars. J Traffic Transp Eng. 2020;20(4):165–173. (In Chinese).
   Google Scholar
• Wang ZW. The modeling and coupling vibration analysis of gear transmission and bearing system for high-speed train with operation environment [Ph.D. thesis], Southwest Jiaotong University, Sichuan, China; 2019.
   Google Scholar
• Wang ZW, Zhang WH, Yin ZH, et al. Effect of vehicle vibration environment of high-speed train on dynamic performance of axle box bearing. Veh Syst Dyn. 2019;57(4):543–563. doi:10.1080/00423114.2018.1473615
   Web of Science ®Google Scholar
• Yu H, Ran Y, Zhang GB, et al. A time-varying comprehensive dynamic model for the rotor system with multiple bearing faults. J Sound Vib. 2020;488:115650. doi:10.1016/j.jsv.2020.115650
   Web of Science ®Google Scholar
• Lu ZG, Wang XC, Yue KY, et al. Coupling model and vibration simulations of railway vehicles and running gear bearings with multitype defects. Mech Mach Theory. 2021;157.
   Web of Science ®Google Scholar
• Shah DS, Patel VN. A dynamic model for vibration studies of dry and lubricated deep groove ball bearings considering local defects on races. Measurement. 2019;137:535–555. doi:10.1016/j.measurement.2019.01.097
   Web of Science ®Google Scholar
• Liu J. A dynamic modelling method of a rotor-roller bearing-housing system with a localized fault including the additional excitation zone. J Sound Vib. 2020;469:115144. doi:10.1016/j.jsv.2019.115144
   Web of Science ®Google Scholar
• Liu J, Xu YJ, Pan G. A combined acoustic and dynamic model of a defective ball bearing. J Sound Vib. 2021;501:116029. doi:10.1016/j.jsv.2021.116029
   Web of Science ®Google Scholar
• Petersen D, Howard C, Sawalhi N, et al. Analysis of bearing stiffness variations, contact forces and vibrations in radially loaded double row rolling element bearings with raceway defects. Mech Syst Signal Process. 2015;50:139–160. doi:10.1016/j.ymssp.2014.04.014
   Web of Science ®Google Scholar
• Pandya DH, Upadhyay SH, Harsha SP. Nonlinear dynamic analysis of high speed bearings due to combined localized defects. J Vib Control. 2014;20(15):2300–2313. doi:10.1177/1077546313483790
   Web of Science ®Google Scholar
• Luo ML, Guo Y, Andre H, et al. Dynamic modeling and quantitative diagnosis for dual-impulse behavior of rolling element bearing with a spall on inner race. Mech Syst Signal Process. 2021;158:107711. doi:10.1016/j.ymssp.2021.107711
   Web of Science ®Google Scholar
• Liu YQ, Wang BS, Yang SP. Nonlinear dynamic behaviors analysis of the bearing rotor system with outer ring faults in the high-speed train. J Mech Eng. 2018;54(8):17–25. doi:10.3901/JME.2018.08.017
   Google Scholar
• Liu YQ, Wang BS, Yang SP, et al. Characteristics analysis of mechanical thermal coupling model of bearing rotor system of high-speed train. Appl Math Mech (English Eidtion). 2022;43(9):1381–1398. doi:10.1007/s10483-022-2893-5
   Google Scholar
• Wang BS, Liu YQ, Zhang B, et al. Development and stability analysis of a high-speed train bearing system under variable speed conditions. Int J Mech Sys Dyn. 2022;2(4):352–362. doi:10.1002/msd2.12057
   Google Scholar
• Wang BS, Liu YQ, Zhang B, et al. Analysis of the temperature characteristics of high-speed train bearings based on a dynamics model and thermal network method. Chin J Mech Eng. 2022;35(1):367–369.
   Web of Science ®Google Scholar
• Liu YQ, Wang BS, Zhang B. Establishment of dynamic model for axle box bearing of high-speed trains under variable speed conditions. Chin J Mech Eng. 2022;35(1):47. doi:10.1186/s10033-022-00725-0.
   Web of Science ®Google Scholar
• Wang JH, Yang JW, Bai YL, et al. A comparative study of the vibration characteristics of railway vehicle axlebox bearings with inner/outer race faults. proceedings of the institution of mechanical engineers. Part F: J Rail Rapid Transit. 2021;235(8):1035–1047. doi:10.1177/0954409720979085
   Web of Science ®Google Scholar
• Singh S, Köpke UG. Howard CQ, et.al. Analyses of contact forces and vibration response for a defective rolling element bearing using an explicit dynamics finite element model. J Sound Vib. 2014;333(21):5356–5377. doi:10.1016/j.jsv.2014.05.011
   Web of Science ®Google Scholar
• Li CX, Liu YQ, Liao YY, et al. Adaptive single-mode variational mode decomposition and its applications in wheelset bearing fault diagnosis. Meas Sci Technol. 2022;33(12):125008. doi:10.1088/1361-6501/ac856c
   Web of Science ®Google Scholar
• Pang B, Nazari M, Tang GJ. Recursive variational mode extraction and its application in rolling bearing fault diagnosis. Mech Syst Signal Process. 2022;165:108321. doi:10.1016/j.ymssp.2021.108321
   Web of Science ®Google Scholar
• Bosso N, Gugliotta A, Zampieri N. Wheel flat detection algorithm for onboard diagnostic. Measurement. 2018;123:193–202. doi:10.1016/j.measurement.2018.03.072
   Web of Science ®Google Scholar
• Mosleh A, Meixedo A, Ribeiro D, et al. Early wheel flat detection: An automatic data-driven wavelet-based approach for railways. Veh Syst Dyn. 2023;61(6):1644–1673. doi:10.1080/00423114.2022.2103436
   Web of Science ®Google Scholar
• Bai YL, Yang JW, Wang JH, et al. Intelligent diagnosis for railway wheel flat using frequency-domain gramian angular field and transfer learning network. Ieee Access. 2020;8:105118–105126. doi:10.1109/ACCESS.2020.3000068
   Web of Science ®Google Scholar
• Ma QY, Liu YQ, Yang SP, et al. A coupling model of high-speed train-axle box bearing and the vibration characteristics of bearing with defects under wheel rail excitation. Machines. 2022;10(11):1024. doi:10.3390/machines10111024
   Web of Science ®Google Scholar
• Wang BS, Liu YQ, Zhang B. Characteristics analysis on bearing rotor system of high-speed train under variable speed conditions. Chin J Theor Appl Mech. 2022;54(7):1839–1852.
   Google Scholar