235
Views
7
CrossRef citations to date
0
Altmetric
Original Articles

Experimental study on the rheological behavior of tetrafluoroethane (R-134a) hydrate slurry

, , &

References

  • Andersson, V., and Gudmundsson, J. S. (2000). Flow properties of hydrate-in-water slurries, Ann. N. Y. Acad. Sci., 912(1), 322–329.
  • Barduhn, A. J., Towlson, H. E., and Hu, Y. C. (1962). The properties of some new gas hydrates and their use in demineralizing sea water, AIChE J., 8(2), 176–183.
  • Bayles, G., Sawyer, W., Anada, H., Reddy, S., and Malone, R. (1986). A steam cycling model for gas production from a hydrate reservoir, Chem. Eng. Commun., 47(4–6), 225–245.
  • Benslimane, A., Bekkour, K., François, P., and Bechir, H. (2016). Laminar and turbulent pipe flow of bentonite suspensions, J. Pet. Sci. Eng., 139, 85–93.
  • Bradshaw, R. W., Greathouse, J. A., Cygan, R. T., Simmons, B. A., Dedrick, D. E., and Majzoub, E. H. (2008). Desalination Utilizing Clathrate Hydrates (LDRD Final Report).
  • Camargo, R., Palermo, T., Sinquin, A., and Glenat, P. (2000). Rheological characterization of hydrate suspensions in oil dominated systems, Ann. N. Y. Acad. Sci., 912(1), 906–916.
  • Chilton, R. A., and Stainsby, R. (1998). Pressure loss equations for laminar and turbulent non-Newtonian pipe flow, J. Hydraul. Eng., 124(5), 522–529.
  • Clain, P., Delahaye, A., Fournaison, L., Mayoufi, N., Dalmazzone, D., and Fürst, W. (2012). Rheological properties of tetra-n-butylphosphonium bromide hydrate slurry flow, Chem. Eng. J., 193, 112–122.
  • Darbouret, M., Cournil, M., and Herri, J.-M. (2005). Rheological study of TBAB hydrate slurries as secondary two-phase refrigerants, Int. J. Refrig., 28(5), 663–671.
  • Delahaye, A., Fournaison, L., Jerbi, S., and Mayoufi, N. (2011). Rheological properties of CO2 hydrate slurry flow in the presence of additives, Ind. Eng. Chem. Res., 50(13), 8344–8353.
  • Delahaye, A., Fournaison, L., Marinhas, S., and Martínez, M. C. (2008). Rheological study of CO2 hydrate slurry in a dynamic loop applied to secondary refrigeration, Chem. Eng. Sci., 63(13), 3551–3559.
  • Fidel-Dufour, A., Gruy, F., and Herri, J.-M. (2006). Rheology of methane hydrate slurries during their crystallization in a water in dodecane emulsion under flowing, Chem. Eng. Sci., 61(2), 505–515.
  • Fournaison, L., Delahaye, A., Chatti, I., and Petitet, J.-P. (2004). CO2 hydrates in refrigeration processes, Ind. Eng. Chem. Res., 43(20), 6521–6526.
  • Fukushima, S., Takao, S., Ogoshi, H., Ida, H., Akiyama, T., and Otsuka, T. (1999). Development of high-density cold latent heat with clathrate hydrate, NKK Technical Report-Japanese Edition, 65–70.
  • Hao, W., Wang, J., Fan, S., and Hao, W. (2008). Evaluation and analysis method for natural gas hydrate storage and transportation processes, Energy Convers. Manage., 49(10), 2546–2553.
  • Hashimoto, S., Makino, T., Inoue, Y., and Ohgaki, K. (2010). Three-phase equilibrium relations and hydrate dissociation enthalpies for hydrofluorocarbon hydrate systems: HFC-134a, -125, and -143a hydrates, J. Chem. Eng. Data, 55(11), 4951–4955.
  • Hong, H. J., Ko, C. H., Song, M. H., Lee, S., and Seong, K. (2016). Effect of ultrasonic waves on dissociation kinetics of tetrafluoroethane (CH2FCF3) hydrate, J. Ind. Eng. Chem., 41, 183–189.
  • Horiguchi, K., Watanabe, S., Moriya, H., Nakai, S., Yoshimitsu, A., and Taoda, A. (2011). Completion of natural gas hydrate (NGH) overland transportation demo project, Proceedings of the 7th international Conference on Gas Hydrates (ICGH-2011), Edinburgh, Scotland.
  • Jeong, K., Choo, Y., Hong, H., Yoon, Y., and Song, M. (2015). Tetrafluoroethane (R134a) hydrate formation within variable volume reactor accompanied by evaporation and condensation, Rev. Sci. Instrum., 86(3), 035102.
  • Karamoddin, M., and Varaminian, F. (2014). Water desalination using R141b gas hydrate formation, Desalin. Water Treat., 52(13–15), 2450–2456.
  • Kwon, K. C., Park, Y., Floyd-Smith, T., Vahdat, N., Jackson, E., Burnell, C., Allen, T., and Jones, P. (2008). Rheological characterization of non-Newtonian fluids with a novel viscometer, Chem. Eng. Commun., 195(6), 687–705.
  • Linga, P., Kumar, R., and Englezos, P. (2007). The clathrate hydrate process for post and pre-combustion capture of carbon dioxide, J. Hazard. Mater., 149(3), 625–629.
  • Luckham, P. F., and Rossi, S. (1999). The colloidal and rheological properties of bentonite suspensions, Adv. Colloid Interface Sci., 82(1), 43–92.
  • Markovitz, H. (1977). Boltzmann and the beginnings of linear viscoelasticity, Trans. Soc. Rheol., 21(3), 381–398.
  • Metzner, A., and Reed, J. (1955). Flow of non‐newtonian fluids—correlation of the laminar, transition, and turbulent‐flow regions, AIChe J., 1(4), 434–440.
  • Nagata, T., Tajima, H., Yamasaki, A., Kiyono, F., and Abe, Y. (2009). An analysis of gas separation processes of HFC-134a from gaseous mixtures with nitrogen—Comparison of two types of gas separation methods, liquefaction and hydrate-based methods, in terms of the equilibrium recovery ratio, Sep. Purif. Technol., 64(3), 351–356.
  • Parent, J., and Bishnoi, P. (1996). Investigations into the nucleation behavior of methane gas hydrates, Chem. Eng. Commun., 144(1), 51–64.
  • Peixinho, J., Karanjkar, P. U., Lee, J. W., and Morris, J. F. (2010). Rheology of hydrate forming emulsions, Langmuir, 26(14), 11699–11704.
  • Peng, B.-Z., Chen, J., Sun, C.-Y., Dandekar, A., Guo, S.-H., Liu, B., Mu, L., Yang, L.-Y., Li, W.-Z., and Chen, G.-J. (2012). Flow characteristics and morphology of hydrate slurry formed from (natural gas+diesel oil/condensate oil + water) system containing anti-agglomerant, Chem. Eng. Sci., 84, 333–344.
  • Peysson, Y., Maurel, P., and Vilagines, R. (2003). Hydrate transportability in multiphase flow. 11th Int. Conf. Multiphase, BHR Group San Remo, Italie.
  • Poole, R., and Ridley, B. (2007). Development-length requirements for fully developed laminar pipe flow of inelastic non-Newtonian liquids, J. Fluids Eng., 129(10), 1281–1287.
  • Prud’homme, R. K. (1991). Rheological measurements. Polymers as rheology modifiers, Am. Chem. Soc., 462, 18–47.
  • Sangwai, J. S., Patel, R. S., Mekala, P., Mech, D., and Busch, M. (2013) Desalination of seawater using gas hydrate technology-current status and future direction. Proceedings of the XVIII Int. Conf. Hydraul., (HYDRO 2013), India.
  • Sarshar, M., Esmaeilzadeh, F., and Fathikalajahi, J. (2009). Study of capturing emitted CO2 in the form of hydrates in a tubular reactor, Chem. Eng. Commun., 196(11), 1348–1365.
  • Seo, Y., and Lee, H. (2001). A new hydrate-based recovery process for removing chlorinated hydrocarbons from aqueous solutions, Environ. Sci. Technol., 35(16), 3386–3390.
  • Sinquin, A., Palermo, T., and Peysson, Y. (2004). Rheological and flow properties of gas hydrate suspensions, Oil Gas Sci. Technol., 59(1), 41–57.
  • Sloan, E., and Koh, C. (2008). Clathrate Hydrates of Natural Gases, 3rd ed., Marcel Dekker Inc., New York.
  • Song, W., Xiao, R., and Feng, Z.-P. (2012). Experimental investigation on tetra-n-butyl-ammonium bromide clathrate hydrate slurry flows in a horizontal tube: Flow behavior and its rheological model, HVACR Res., 18(3), 461–467.
  • Webb, E. B., Rensing, P. J., Koh, C. A., Sloan, E. D., Sum, A. K., and Liberatore, M. W. (2012). High pressure rheometer for in situ formation and characterization of methane hydrates, Rev. Sci. Instrum., 83(1), 015106.
  • Yan, K.-L., Sun, C.-Y., Chen, J., Chen, L.-T., Shen, D.-J., Liu, B., Jia, M.-L., Niu, M., Lv, Y.-N., and Li, N. (2014). Flow characteristics and rheological properties of natural gas hydrate slurry in the presence of anti-agglomerant in a flow loop apparatus, Chem. Eng. Sci., 106, 99–108.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.