References
- Achaw, O.-W., and Afriyie, J. K. (2015). Effects of changes in the operating conditions on the stack gas temperature and stability of biomass-fueled boilers, Chem. Eng. Commun., 202, 971–981.
- Alves, M., Ponce, G. H. S. F., Silva, M. A., and Ensinas, A. V. (2015). Surplus electricity production in sugarcane mills using residual bagasse and straw as fuel, Energy, 91, 751–757.
- Aziz, M., Oda, T., and Kashiwagi, T. (2015). Innovative steam drying of empty fruit bunch with high energy efficiency, Drying Technol., 33, 395–405.
- Berghel, J., and Renstrom, R. (2014). Superheated steam drying of sawdust in continuous feed spouted beds–A design perspective, Biomass Bioenergy, 71, 228–234.
- Birru, E., Erlich, C., Beyene, G. B., and Martin, A. (2016). Upgrading of a traditional sugar cane mill to a modern mill and assessing the potential of energy saving during steady state and transient conditions—part II: Models for a modified cogeneration unit, Biomass Conv. Bioref., 6, 233–245.
- Burin, E. K., Buranello, L., Giudice, P. L., Vogel, T., Gorner, K., and Bazzo, E. (2015). Boosting power output of a sugarcane bagasse cogeneration plant using parabolic trough collectors in a feedwater heating scheme, Appl. Energy, 154, 232–241.
- Chantasiriwan, S. (2017). Investigation of performance improvement of the evaporation process in raw sugar manufacturing by increasing heat transfer surfaces, Chem. Eng. Commun., 204, 599–606.
- Chryat, Y., Romdhana, H., and Esteban-Decloux, M. (2017). Reducing energy requirement for drying of beet-pulp: Simulation of energy integration between superheated steam and air drying systems, Drying Technol., 35, 838–848.
- Deshmukh, R., Jacobson, A., Chamberlin, C., and Kammen, D. (2013). Thermal gasification or direct combustion? Comparison of advanced cogeneration systems in the sugarcane industry, Biomass Bioenergy, 55, 163–174.
- Ensinas, A. V., Nebra, S. A., Lozano, M. A., and Serra, L. (2007). Design of evaporation systems and heaters networks in sugarcane factories using a thermoeconomic optimization procedure, Int. J. Thermodyn., 10, 97–105.
- Jensen, A. S. (2003). Steam drying of beet pulp and bagasse, Int. Sugar J., 105, 83–88.
- Li, H., Chen, Q., Zhang, X., Finney, K. N., Sharifi, V. N., and Swithenbank, J. (2012). Evaluation of a biomass drying process using waste heat from process industries: A case study, Appl. Therm. Eng., 35, 71–80.
- Morey, R. V., Zheng, H., Kaliyan, N., and Pham, M. V. (2014). Modelling of superheated steam drying for combined heat and power of a corn ethanol plant using aspen plus software, Biosyst. Eng., 119, 80–88.
- Morgenroth, B., and Batstone, D. (2005). Development and prospects for drying bagasse by steam, Int. Sugar J., 107, 410–415.
- Qian, H., Guo, X., Fan, S., Hagos, K., Lu, X., Liu, C., and Huang, D. (2016). A simple prediction model for higher heat value of biomass, J. Chem. Eng. Data, 61, 4039–4045.
- Rein, P. (2007). Cane Sugar Engineering, Verlag Bartens, Berlin, Germany.
- Romdhana, H., Bonazzi, C., and Esteban-Decloux, M. (2015). Superheated steam drying: An overview of pilot and industrial dryers with a focus on energy efficiency, Drying Technol., 33, 1255–1274.
- Sosa-Arnao, J. H., Correa, J. L. G., Silva, M. A., and Nebra, S. A. (2006). Supercane bagasse drying–A review, Int. Sugar J., 108, 381–386.
- Sosa-Arnao, J. H., and Nebra, S. (2009). Bagasse dryer role in the energy recovery of water tube boilers, Drying Technol., 27, 587–594.
- Sun, L., and Smith, R. (2015). Performance modeling of new and existing steam turbines, Ind. Eng. Chem. Res., 54, 1908–1915.
- Verbanck, H. (1997). Development of a mathematical model for watertube boiler heat transfer calculations, Proc. S. Afr. Sugar Tech. Assoc., 71, 166–171.
- Yarnal, G. S., and Puranik, V. S. (2010). Energy management study in sugar industries by various bagasse drying methods, Strat. Plan. Energy Environ., 29, 56–78.