References
- Bauer, J., Herrmann, R., Mittelbach, W., and Schwieger, W. (2009). Zeolite/aluminum composite adsorbents for application in adsorption refrigeration, Int. J. Energy Res., 33, 1233–1249.
- Bonaccorsi, L., and Proverbio, E. (2004). Synthesis of thick zeolite 4A coatings on stainless steel, Microporous Mesoporous Mater., 74, 221–229.
- Bonaccorsi, L., Freni, A., Proverbio, E., Restuccia, G., and Russo, F. (2006). Zeolite coated copper foams for heat pumping applications, Microporous Mesoporous Mater., 91, 7–14.
- Bonaccorsi, L., Calabrese, L., and Proverbio, E. (2011). Low temperature single-step synthesis of zeolite Y coatings on aluminium substrates, Microporous Mesoporous Mater., 144, 40–45.
- Chanda, R., Selvam, T., Herrmann, R., and Schwieger, W. (2018). Reactive coating process for binder-free zeolite FAU films on metallic aluminum supports, Mater. Lett., 211, 103–106.
- Demir, H., Mobedi, M., and Ülkü, S. (2008). A review on adsorption heat pump: Problems and solutions, Renew. Sustain. Energ. Rev., 12, 2381–2403.
- Deng, Z., and Balkus, K. J. (2002). Pulsed laser deposition of zeolite NaX thin films on silica fibers, Microporous Mesoporous Mater., 56, 47–53.
- Erdem-Senatalar, A., Tatlıer, M., and Ürgen, M. (1999). Preparation of zeolite coatings by direct heating of the substrates, Microporous Mesoporous Mater., 32, 331–343.
- Fankhanel, B., Muller, E., and Tomandl, G. (2009). NaX-zeolite coatings on highly porous metal fibre substrates, Microporous Mesoporous Mater., 118, 416–422.
- Freni, A., Bonaccorsi, L., Calabrese, L., Capri, A., Frazzica, A., and Sapienza, A. (2015). SAPO-34 coated adsorbent heat exchanger for adsorption chillers, Appl. Therm. Eng., 82, 1–7.
- Fueldner, G., Schnabel, L., Wittstadt, U., Henning, H.-M., and Schmidt, F. (2011). Numerical layer optimization of aluminum fibre/SAPO-34 composites for the application in adsorptive heat exchangers. Proceedings of International Sorption Heat Pump Conference (ISHPC11), April 6–8, Padua, Italy, 533–542.
- Lauridant, N., Daou, T. J., Arnold, G., Soulard, M., Nouali, H., Patarin, J., and Faye, D. (2012). Key steps influencing the formation of ZSM-5 films on aluminum substrates, Microporous Mesoporous Mater., 152, 1–8.
- Lauridant, N., Daou, T. J., Arnold, G., Nouali, H., Patarin, J., and Faye, D. (2013a). Zeolite hybrid films for space decontamination, Microporous Mesoporous Mater., 172, 36–43.
- Lauridant, N., Daou, T. J., Arnold, G., Patarin, J., and Faye, D. (2013b). MFI/BEA hybrid coating on aluminum alloys, Microporous Mesoporous Mater., 166, 79–85.
- Meunier, F. (2013). Adsorption heat powered heat pumps, Appl. Therm. Eng., 61, 830–836.
- Munoz, R., Beving, D., Mao, Y., and Yan, Y. S. (2005). Zeolite Y coatings on Al-2024-T3 substrate by a three-step synthesis method, Microporous Mesoporous Mater., 86, 243–248.
- Robson, H., and Lillerrud, K. P. (2001). Verified Syntheses of Zeolitic Materials, Elsevier, Amsterdam.
- Schnabel, L., Tatlier, M., Schmidt, F., and Erdem-Şenatalar, A. (2010). Adsorption kinetics of zeolite coatings directly crystallized on metal supports for heat pump applications, Appl. Therm. Eng., 30, 1409–1416.
- Tatlier, M., Munz, G., Fueldner, G., and Henninger, S. K. (2014). Effect of zeolite a coating thickness on adsorption kinetics for heat pump applications, Microporous Mesoporous Mater., 193, 115–121.
- Tatlier, M., and Atalay-Oral, C. (2017). Preparation of zeolite X coatings on soda-lime type glass plates, Braz. J. Chem. Eng., 34, 203–210.
- Xhanari, K., and Finsgar, M. (2016). Organic corrosion inhibitors for aluminum and its alloys in chloride and alkaline solutions: A review, Arabian J. Chem. doi:10.1016/j.arabjc.2016.08.009.
- Yamazaki, S., and Tsutsumi, K. (1995). Synthesis of an A-type zeolite membrane on silicon oxide film-silicon, quartz plate and quartz fiber filter, Microporous Mater., 4, 2015–2212.