Temporal variation of voids in waxy crude oil gel in the presence of temperature gradient

References

• Ahmadpour, A., Sadeghy, K., and Maddah-Sadatieh, S.-R. (2014). The effect of a variable plastic viscosity on the restart problem of pipelines filled with gelled waxy crude oils, J. Non-Newtonian Fluid Mech., 205, 16–27.
   Web of Science ®Google Scholar
• Aiyejina, A., Chakrabarti, D. P., Pilgrim, A., and Sastry, M. K. S. (2011). Wax formation in oil pipelines: A critical review, Int. J. Multiphase Flow, 37, 671–694.
   Web of Science ®Google Scholar
• Alcazar-Vara, L. A., Garcia-Martinez, J. A., and Buenrostro-Gonzalez, E. (2012). Effect of asphaltenes on equilibrium and rheological properties of waxy model systems, Fuel, 93, 200–212.
   Web of Science ®Google Scholar
• Carnahan, N. F. (2007). Wax Properties and Behavior in Offshore Production and Transportation Systems, Presented at the Offshore Technology Conference. 30 April-3 May, Houston, Texas, USA.
   Google Scholar
• Chala, G. T., Chan, C., and Sadig, H. (2018). Temperature profile and its effects on the location of lower denser substance in waxy crude oil: A numerical study, Adv. Sci. Lett., 24, 8880–8884.
   Google Scholar
• Chala, G. T., Sulaiman, S., and Japper-Jaafar, A. (2018). Flow start-up and transportation of waxy crude oil in pipelines—a review, J. Non-Newtonian Fluid Mech., 251, 69–87.
   Web of Science ®Google Scholar
• Chala, G. T., Sulaiman, S. A., Japper-Jaafar, A., and Kamil Wan Abdullah, W. A. (2015). Study on influence of flow rates on voids in waxy crude oil subjected to dynamic and static cooling, J. Mech. Eng. Sci., 9, 1587–1594.
   Google Scholar
• Chala, G. T., Sulaiman, S. A., Japper-Jaafar, A., and Kamil Wan Abdullah, W. A. (2015). Impacts of cooling rates on voids in waxy crude oil under quiescent cooling mode, AMM 799-800, 62–66.
   Google Scholar
• Chala, G. T., Sulaiman, S. A., Japper-Jaafar, A., and Kamil Wan Abdullah, W. A. (2016). Investigation of convective heat transfer coefficient and initial temperature of waxy crude oil on the formation of voids, Int. J. Automot. Mech. Eng., 13, 3754–3762.
   Web of Science ®Google Scholar
• Chala, G. T., Sulaiman, S. A., Japper-Jaafar, A., Kamil Wan Abdullah, W. A., and Mior Mokhtar, M. M. (2014). Gas void formation in statically cooled waxy crude oil, Int. J. Therm. Sci., 86, 41–47.
   Web of Science ®Google Scholar
• Chala, G. T., Sulaiman, S. A., Japper-Jaafar, A., and Kamil Wan Abdullah, W. A. (2015). Effects of cooling regime on the formation of voids in statically cooled waxy crude oil, Int. J. Multiphase Flow, 77, 187–195.
   Web of Science ®Google Scholar
• Chanda, D., Sarmah, A., Borthakur, A., Rao, K. V., Subrahmanyam, B., and Das, H. C. (1998). Combined effect of asphaltenes and flow improvers on the rheological behaviour of Indian waxy crude oil, Fuel, 77, 1163–1167.
   Web of Science ®Google Scholar
• Chen, W., and Zhao, Z. (2006). Thermodynamic modeling of wax precipitation in crude oils, Chin. J. Chem. Eng., 14, 685–689.
   Web of Science ®Google Scholar
• Dalirsefat, R., and Feyzi, F. (2007). A thermodynamic model for wax deposition phenomena, Fuel, 86, 1402–1408.
   Web of Science ®Google Scholar
• Economides, M. J., and Chaney, G. T. Jr., (1983). The rheological properties of Prudhoe Bay oil and the effects of a prolonged flow interruption on its flow behavior, Soc. Petrol Eng. J., 408–416.
   Web of Science ®Google Scholar
• Gan, Y., Cheng, Q., Sun, W., Gao, W., Liu, X., and Liu, Y. (2018). The stability criterion model and stability analysis of waxy crude oil pipeline transportation system based on excess entropy production, J. Therm. Sci., 27, 541–554.
   Web of Science ®Google Scholar
• Kulkarni, M. M., and Iyer, K. (2005). Effects of pour-point depressants on Indian crude oils, presented at the SPE Annual Technical Conference and Exhibition, 9–12 October, Dallas, Texas, USA.
   Google Scholar
• Marchesini, F. H., Alicke, A. A., de Souza Mendes, P. R., and Ziglio, C. M. (2012). Rheological characterization of waxy crude oils: Sample preparation, Energy Fuels, 26, 2566–2577.
   Web of Science ®Google Scholar
• Mortazavi-Manesh, S., and Shaw, J. M. (2014). Thixotropic rheological behavior of Maya crude oil, Energy Fuels, 28, 972–979.
   Web of Science ®Google Scholar
• Oh, K., Jemmett, M., and Deo, M. (2009). Yield behavior of gelled waxy oil: Effect of stress application in creep ranges, Ind. Eng. Chem. Res., 48, 8950–8953.
   Web of Science ®Google Scholar
• Phillips, D. A., Forsdyke, I. N., McCracken, I. R., and Ravenscroft, P. D. (2011). Novel approaches to waxy crude restart. Part 1: Thermal shrinkage of waxy crude oil and the impact for pipeline restart, J. Petrol Sci. Eng., 77, 237–253.
   Web of Science ®Google Scholar
• Shafquet, A., Ismail, I., Japper-Jaafar, A., Sulaiman, S. A., and Chala, G. T. (2015). Estimation of gas void formation in statically cooled waxy crude oil using online capacitance measurement, Int. J. Multiphase Flow, 75, 257–266.
   Web of Science ®Google Scholar
• Skjaeraasen, O., Oschmann, H. J., Paso, K., and SjöBlom, J. (2014). Accurate assessment of pipeline restart behavior at subsea conditions for a highly waxy crude oil employing advanced computational pressure wave modeling, Ind. Eng. Chem. Res., 54, 4429–4440. pp.
   Web of Science ®Google Scholar
• Sulaiman, S. A., Biga, B. K., and Chala, G. T. (2017). Injection of non-reacting gas into production pipelines to ease restart pumping of waxy crude oil, J. Petrol Sci. Eng., 152, 549–554.
   Web of Science ®Google Scholar
• Sifferman, T. R. (1979). Flow properties of difficult-to-handle waxy crude oils, J. Petrol Technol., 31, 1042–1050.
   Google Scholar
• Tiwary, D., and Mehrotra, A. K. (2004). Phase transformation and rheological behaviour of highly paraffinic “waxy” mixtures, Can. J. Chem. Eng., 82, 162–174.
   Web of Science ®Google Scholar
• Vinay , G., Wachs , A., and Agassant , J.-F. (2005). Numerical simulation of non-isothermal viscoplastic waxy crude oil flows, J. Non-Newtonian Fluid Mech., 128, 144–162.
   Web of Science ®Google Scholar
• Visintin, R. F. G., Lapasin, R., Vignati, E., D'Antona, P., and Lockhart, T. P. (2005). Rheological behavior and structural interpretation of waxy crude oil gels, Langmuir, 21, 6240–6249.
   PubMed Web of Science ®Google Scholar
• Visintin, R. F. G., Lockhart, T. P., Lapasin, R., and D’Antona, P. (2008). Structure of waxy crude oil emulsion gels, J. Non-Newtonian Fluid Mech., 149, 34–39.
   Web of Science ®Google Scholar
• Wachs, A., Vinay, G., and Frigaard, I. (2009). A 1.5D numerical model for the start up of weakly compressible flow of a viscoplastic and thixotropic fluid in pipelines, J. Non-Newtonian Fluid Mech., 159, 81–94.
   Web of Science ®Google Scholar
• Wang, W., and Huang, Q. (2014). Prediction for wax deposition in oil pipelines validated by field pigging, J. Inst. Energy 87, 196–207.
   Google Scholar
• Wang, Z., Liu, Y., Li, J., Zhuge, X., and Zhang, L. (2016). Study on two-phase oil–water gelling deposition behavior in low-temperature transportation, Energy Fuels, 30, 4570–4582.
   Web of Science ®Google Scholar
• Zhao, Y., Kumar, L., Paso, K., Safieva, J., Sariman, M. Z. B., and Sjöblom, J. (2012). Gelation behavior of model wax–oil and crude oil systems and yield stress model development, Energy Fuels, 26, 6323–6331.
   Web of Science ®Google Scholar
• Zheming, L., and Guozhong, Z. (1992). Rheological properties of waxy crude oils in pipelines. In Theoretical and Applied Rheology, ed Keunings P. M., 976, Amsterdam, Elsevier.
   Google Scholar
• Zhu, H., Yang, X., Li, J., and Li, N. (2013). Simulation analysis of thermal influential factors on crude oil temperature when double pipelines are laid in one ditch, Adv. Eng. Softw., 65, 23–31.
   Web of Science ®Google Scholar