References
- ANSYS. 2019. ANSYS fluent theory guide 19.2. ANSYS Inc, Canonsburg, Pennsylvania.
- Ashraf Ali B, Janiga G, Temmel E, Seidel-Morgenstern A, Thévenin D. 2013. Numerical analysis of hydrodynamics and crystal motion in a batch crystallizer. J Cryst Growth. 372:219–229.
- Bakker A, Fasano JB. 1998. Time Dependent, Turbulent Mixing and Chemical Reaction in Stirred Tanks. Annual AIChE Meeting, November 1993, St. Louis, Missouri. AIChE Symposium Series 299, Volume 90, 71-78.
- Bakker A, Fasano JB, Myers KJ. 1994. Effects of Flow Pattern on the Solids Distribution in a Stirred Tank. 8th European Conference on Mixing, September 21-23, Cambridge, U.K. IChemE Symposium Series No. 136, p 1-8.
- Baldyga J, Bourne JR. 1984. A fluid mechanical approach to turbulent mixing and chemical reaction part I inadequacies of available methods. Chem Eng Commun. 28(4–6):231–241. doi:10.1080/00986448408940135
- Bittorf KJ, Kresta SM. 2003. Prediction of cloud height for solid suspensions in stirred tanks. Chem Eng Res Des. 81(5):568. doi:10.1205/026387603765444519
- Derksen JJ. 2003. Numerical simulation of solids suspension in a stirred tank. AIChE J. 49(11):2700. doi:10.1002/aic.690491104
- Ding J, Gidaspow D. 1990. A bubbling fluidization model using kinetic theory of granular flow. AIChE J. 36(4):523–538. doi:10.1002/aic.690360404
- Fox RW, Pritchard PJ, Mcdonald AT. 2009. Introduction to fluid mechanics. 7th ed. Hoboken, NJ: John Wiley and Sons, Inc.
- Gidaspow D. 2012. Multiphase flow and fluidization: continuum and kinetic theory descriptions. London: Academic press. p. 73–97.
- Hicks MT, Myers KJ, Bakker A. 1997. Cloud height in solids suspension agitation. Chem Eng Commun. 160(1):137–155. doi:10.1080/00986449708936610
- Launder BE, Spalding DB. 1972. Mathematical models of turbulence. London: Academic press..
- Magelli F, Montante G, Pinelli D, Paglianti A. 2013. Mixing time in high aspect ratio vessels stirred with multiple impellers. Chem Eng Sci. 101:712–720. doi:10.1016/j.ces.2013.07.022
- Marshall EM, Bakker A. 2003. Computational fluid mixing. Handbook of industrial mixing: Science and practice, p. 257–343.
- Meroney RN, Colorado PE. 2009. CFD simulation of mechanical draft tube mixing in anaerobic digester tanks. Water Res. 43(4):1040–1050. doi:10.1016/j.watres.2008.11.035
- Ochieng A, Lewis AE. 2006. CFD simulation of solids off-bottom suspension and cloud height. Hydrometallurgy. 82(1–2):1–12. doi:10.1016/j.hydromet.2005.11.004
- Ochieng A, Onyango MS. 2010. CFD simulation of solids suspension in stirred tanks: review. Hemijska Industrija. 64(5):365–374. doi:10.2298/HEMIND100714051O
- Oshinowo LM, Bakker A. 2002. CFD modeling of solids suspensions in stirred tanks. In Symposium on Computational Modelling of Metals, Minerals and Materials, TMS Annual Meeting. Seattle, WA p. 234-242.
- Sahu AK, Kumar P, Patwardhan AW, Joshi JB. 1999. CFD modelling and mixing in stirred tanks. Chem Eng Sci. 54(13–14):2285– 2293. doi:10.1016/S0009-2509(98)00334-0
- Sommerfeld M, Decker S. 2004. State of the art and future trends in CFD simulation of stirred vessel hydrodynamics. Chem Eng Technol. 27(3):215–224. doi:10.1002/ceat.200402007
- Vedantam S, Ranade VV. 2013. Crystallization: Key thermodynamic, kinetic and hydrodynamic aspects. Sadhana – Acad Proc Eng Sci. 38(6):1287–1337. doi:10.1007/s12046-013-0195-4
- Visuri O, Liiri M, Alopaeus V. 2011. Comparison and validation of CFD models in liquid-solid suspensions. Can J Chem Eng. 89(4):696–706. doi:10.1002/cjce.20458
- Wadnerkar D, Tade MO, Pareek VK, Utikar RP. 2016. CFD simulation of solid–liquid stirred tanks for low to dense solid loading systems. Particuology. 29:16–33. doi:10.1016/j.partic.2016.01.012
- Wan B, Ring TA, Dhanasekharan KM, Sanyal J. 2005. Comparison of analytical solutions for cmsmpr crystallizer with QMOM population balance modeling in fluent. China Particuol. 3(4):213–218. doi:10.1016/S1672-2515(07)60189-4
- Wu B. 2014. CFD simulation of gas mixing in anaerobic digesters. Comput Electron Agric. 109:278–286. doi:10.1016/j.compag.2014.10.007