Reference
- Chandrasekhar S, Ramaswamy S. 2006. Iron minerals and their influence on the optical properties of two Indian kaolins. Appl Clay Sci. 33(3–4):269–277. doi:10.1016/j.clay.2006.06.008
- Dermont G, Bergeron M, Mercier G, Richer-Laflèche M. 2008. Soil washing for metal removal: a review of physical/chemical technologies and field applications. J Hazard Mater. 152(1):1–31. doi:10.1016/j.jhazmat.2007.10.043
- FEPA-Standard 43-1. 2006. Grains of fused aluminium oxide, silicon carbide and other abrasive materials for coated abrasives macro grits P 12 to P 220. www.fepa-abrasives.org.
- Khezrloo A, Aghaie E, Tayebi M. 2018. Split tensile strength of slag-based boro aluminosilicate geopolymer. J Aust Ceram Soc. 54(1):65–70. doi:10.1007/s41779-017-0127-6
- Liu L, Liang Y, Song Q, Li J. 2017. A review of waste prevention through 3R under the concept of circular economy in China. J Mater Cycles Waste Manag. 19(4):1314–1323. doi:10.1007/s10163-017-0606-4
- Mwaikambo LY, Ansell MP. 2002. Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization. J Appl Polym Sci. 84(12):2222–2234. doi:10.1002/app.10460
- Nzioka AM, Yan CZ, Kim MG, Sim YJ, Lee CS, Kim YJ. 2018. Improvement of the chemical recycling process of waste carbon fiber reinforced plastics using a mechanochemical process: influence of process parameters. Waste Manag Res. 36(10):952–964. doi:10.1177/0734242X18790351
- Sabarinathan P, Annamalai VE, Kumar SS, Kennedy AX. 2019. A study on recovery of alumina grains from spent vitrified grinding wheel. J Mater Cycles Waste Manag. 21(1):156–165. doi:10.1007/s10163-018-0776-8
- Sabarinathan P, Annamalai VE, Kumar K. 2019. Evaluation of thermal stability and damping behavior of electrical insulator waste reinforced thermoset polymer composite. Proc Inst Mech Eng Part C. 233(10):3603–3618. doi:0954406218823229.
- Sabarinathan P, Rajkumar K, Gnanavelbabu A. 2016. Mechanical properties of almond shell-sugarcane leaves hybrid epoxy polymer composite. AMM. 852:43–48. doi:10.4028/www.scientific.net/AMM.852.43
- Senophiyah-Mary J, Loganath R, Meenambal T. 2018. A novel method for the removal of epoxy coating from waste printed circuit board. Waste Manag Res. 36(7):645–652. doi:10.1177/0734242X18782392
- Tuncuk A, Ciftlik S, Akcil A. 2013. Factorial experiments for iron removal from kaolin by using single and two-step leaching with sulfuric acid. Hydrometallurgy. 134–135:80–86. doi:10.1016/j.hydromet.2013.02.006
- Wang G, Zhou X, Yang X, Zhou H, Chen G. 2015. Material removal profile for large mould polishing with coated abrasives. Int J Adv Manuf Technol. 80(1–4):625–635. doi:10.1007/s00170-014-6378-2