References
- Alliet-Gaubert M, Sardeing R, Xuereb C, Hobbes P, Letellier B, Swaels P. 2006. CFD analysis of industrial multi-staged stirred vessels. Chem Eng Process. 45(5):415–427. doi:https://doi.org/10.1016/j.cep.2005.11.003
- Ansys Fluent Theory Guide, 2011.
- Ashraf Ali B, Janiga G, Temmel E, Seidel-Morgenstern A, Thévenin D. 2013. Numerical analysis of hydrodynamics and crystal motion in a batch crystallizer. J Cryst Growth. 372:219–229. doi:https://doi.org/10.1016/j.jcrysgro.2013.01.041
- Ayranci I, Machado MB, Madej AM, Derksen JJ, Nobes DS, Kresta SM. 2012. Effect of geometry on the mechanisms for off-bottom solids suspension in a stirred tank. Chem Eng Sci. 79:163–176. doi:https://doi.org/10.1016/j.ces.2012.05.028
- Chara Z, Kysela B, Konfrst J, Fort I. 2016. Study of fluid flow in baffled vessels stirred by a Rushton standard impeller. Appl Math Comput. 272:614–628. doi:https://doi.org/10.1016/j.amc.2015.06.044
- Chudacek MW. 1985. Solids suspension behaviour in profiled bottom and flat bottom mixing tanks. Chem Eng Sci. 40(3):385–392. doi:https://doi.org/10.1016/0009-2509(85)85100-9
- Devi TT, Kumar B. 2013. CFD simulation of flow patterns in dual impeller stirred tank. Int J Model Simul. 33(2):117–125. doi:https://doi.org/10.2316/Journal.205.2013.2.205-5776
- Ding J, Gidaspow D. 1990. A bubbling fluidization model using kinetic theory of granular flow. AIChE J. 36(4):523–538. doi:https://doi.org/10.1002/aic.690360404
- Fathi Roudsari S, Ein-Mozaffari F, Dhib R. 2013. Use of CFD in modeling MMA solution polymerization in a CSTR. Chem Eng J. 219:429–442. doi:https://doi.org/10.1016/j.cej.2012.12.049
- Fox RW, Mcdonald AT, PritchardPJ. 2004. Introduction to fluid mechanics, 6th ed.; New York: John Wiley & Sons, Inc.
- Khopkar AR, Kasat GR, Pandit AB, Ranade VV. 2006. Computational fluid dynamics simulation of the solid suspension in a stirred slurry reactor. Ind Eng Chem Res. 45(12):4416–4428. doi:https://doi.org/10.1021/ie050941q
- Kumaresan T, Nere NK, Joshi JB. 2005. Effect of internals on the flow pattern and mixing in stirred tanks. Ind Eng Chem Res. 44(26):9951–9961. doi:https://doi.org/10.1021/ie0503848
- Montante G, Magelli F. 2005. Modelling of solids distribution in stirred tanks: analysis of simulation strategies and comparison with experimental data. Int J Comput Fluid Dyn. 19(3):253–262. doi:https://doi.org/10.1080/10618560500081795
- Ranade VV, Mishra VP, Saraph VS, Deshpande GB, Joshi JB. 1992. Comparison of axial flow impellers using a laser Doppler anemometer. Ind Eng Chem Res. 31(10):2370–2379. doi:https://doi.org/10.1021/ie00010a016
- Rieger F, Ditl P. 1994. Suspension of solid particles. Chem Eng Sci. 49(14):2219–2227. doi:https://doi.org/10.1016/0009-2509(94)E0029-P
- Shan X, Yu G, Yang C, Mao Z-S, Zhang W. 2008. Numerical simulation of liquid − solid flow in an unbaffled stirred tank with a pitched-blade turbine downflow. Ind Eng Chem Res. 47(9):2926–2940. doi:https://doi.org/10.1021/ie071225m
- Tamburini A, Cipollina A, Micale G, Brucato A, Ciofalo M. 2014. Influence of drag and turbulence modelling on CFD predictions of solid liquid suspensions in stirred vessels. Chem Eng Res Des. 92(6):1045–1063. doi:https://doi.org/10.1016/j.cherd.2013.10.020
- Vlček P, Skočilas J, Jirout T. 2013. CFD simulation of a stirred dished bottom vessel. Acta Polytech. 53(6):906–912. doi:https://doi.org/10.14311/AP.2013.53.0906
- Wichterle K. 1988. Conditions for suspension of solids in agitated vessels. Chem Eng Sci. 43(3):467–471. doi:https://doi.org/10.1016/0009-2509(88)87007-6