Thermo-mechanical performance of PVC/ZnO nanocomposites

References

• Kaczmarek H, Kowalonek J, Oldak D. The influence of UV-irradiation on poly (vinyl chloride) modified by iron and cobalt chlorides. Polym Degrad Stab. 2003;79(2):231–240.
   Web of Science ®Google Scholar
• Endo K. Synthesis and structure of poly (vinyl chloride). Prog Polym Sci. 2002;27(10):2021–2054.
   Web of Science ®Google Scholar
• Shabana YM, Wang GT. Thermomechanical modeling of polymer nanocomposites by the asymptotic homogenization method. Acta Mech. 2013;224:1213–1224.
   Web of Science ®Google Scholar
• Choi J, Shin H, Yang S, et al. The influence of nanoparticle size on the mechanical properties of polymer nanocomposites and the associated interphase region: a multiscale approach. Compos Struct. 2015;119:365–376.
   Web of Science ®Google Scholar
• Yang L, Hu Y, Guo H, et al. Toughening and reinforcement of rigid PVC with silicone rubber/nano-CaCO3 shell-core structured fillers. J Appl Polym Sci. 2006;102(3):2560–2567.
   Web of Science ®Google Scholar
• Chazeau L, Cavaille JY, Perez J. Plasticized PVC reinforced with cellulose whiskers. II. Plastic behavior. J Polym Sci Part B Polym Phys. 2000;38(3):383–392.
   Web of Science ®Google Scholar
• Imanishi H, Yamaguchi T, Fukuda N. Improvement of impact resistant property of poly (vinyl chloride) filled with calcium carbonate. J Polym Sci Technol. 2000;57(9):590–595.
   Google Scholar
• Kawaguchi H. Functional polymer microspheres. Prog Polym Sci. 2000;25(8):1171–1210.
   Web of Science ®Google Scholar
• Xiong M, Gu G, You B, et al. Preparation and characterization of poly (styrene butylacrylate) latex/nano‐ZnO nanocomposites. J Appl Polym Sci. 2003;90(7):1923—1931.
   Web of Science ®Google Scholar
• Xing F, Cheng G, Yang B, et al. Microencapsulation of capsaicin by the complex coacervation of gelatin, acacia and tannins. J Appl Polym Sci. 2004;91(4):2669–2675.
   Web of Science ®Google Scholar
• Li X, Xing Y, Jiang Y, et al. Antimicrobial activities of ZnO powder‐coated PVC film to inactivate food pathogens. Int J Food Sci Technol. 2009;44(11):2161–2168.
   Web of Science ®Google Scholar
• Tang E, Cheng G, Pang X, et al. Synthesis of nano-ZnO/poly (methyl methacrylate) composite microsphere through emulsion polymerization and its UV-shielding property. Colloid Polym Sci. 2006;284(4):422–428.
   Web of Science ®Google Scholar
• Elashmawi IS, Hakeem NA, Marei LK, et al. Structure and performance of ZnO/PVC nanocomposites. Phys B Condens Matter. 2010;405(19):4163–4169.
   Web of Science ®Google Scholar
• Mansour SA, Elsad RA, Izzularab MA. Dielectric properties enhancement of PVC nanodielectrics based on synthesized ZnO nanoparticles. J Polym Res. 2016;23(5):1–8.
   Web of Science ®Google Scholar
• Ebnalwaled AA, Thabet A. Controlling the optical constants of PVC nanocomposite films for optoelectronic applications. Synth Met. 2016;220:374–383.
   Web of Science ®Google Scholar
• Zarrinkhameh M, Zendehnam A, Hosseini SM. Fabrication of polyvinylchloride based nanocomposite thin film filled with zinc oxide nanoparticles: morphological, thermal and optical characteristics. J Ind Eng Chem. 2015;30:295–301.
   Web of Science ®Google Scholar
• Rabiee H, Vatanpour V, Farahani MH, et al. Improvement in flux and antifouling properties of PVC ultrafiltration membranes by incorporation of zinc oxide (ZnO) nanoparticles. Separ Purif Technol. 2015;156:299–310.
   Web of Science ®Google Scholar
• Zarrinkhameh M, Zendehnam A, Hosseini SM. Electrochemical, morphological and antibacterial characterization of PVC based cation exchange membrane modified by zinc oxide nanoparticles. J Polym Res. 2013;20(11):1–9.
   Web of Science ®Google Scholar
• Mathur V, Dixit M, Rathore KS, et al. Morphological and mechanical characterization of a PMMA/CdS nanocomposite. Front Chem Sci Eng. 2011;5(2):258–263.
   Google Scholar
• Mathur V, Rathore KS, Sharma K. Evaluation of energy band gap, thermal conductivity, phase transition temperature and elastic response of ps/cds semiconducting optical nanocomposite. World J Nano Sci Eng. 2013;5:93–99.
   Google Scholar
• Menard K. Dynamic mechanical analysis: a practical introduction. Boca Raton (FL): CRC Press LLC; 1999. p. 61–64, 94–100.
   Google Scholar
• Nielsen LE, Landel RF. Mechanical properties of polymers and composites. 2nd ed. New York/Basel: Marcel Dekker Inc.; 1994.
   Google Scholar
• Ediger MD, Angell CA, Nagel SR. Supercooled liquids and glasses. J Phys Chem. 1996;100(31):13200–13212.
   Web of Science ®Google Scholar
• Mathur V, Dixit M, Saxena NS, et al. Morphological effects on mechanical properties of polystyrene-polyvinylchloride blends. Phase Transit. 2009;82(11):769–779.
   Web of Science ®Google Scholar
• Abdalla M, Dean D, Adibempe D, et al. The effect of interfacial chemistry on molecular mobility and morphology of multiwalled carbon nanotubes epoxy nanocomposite. Polymer. 2007;48(19):5662–5670.
   Web of Science ®Google Scholar
• Patidar D, Agrawal S, Saxena NS. Storage modulus and glass transition behaviour of CdS/PMMA nanocomposites. J Exp Nanosci. 2011;6(4):441–449.
   Web of Science ®Google Scholar
• Agrawal S, Patidar D, Saxena NS. Glass transition temperature and thermal stability of ZnS/PMMA nanocomposites. Phase Transit. 2011;84(11–12):888–900.
   Web of Science ®Google Scholar
• Maji PK, Guchhait PK, Bhowmick AK. Effect of the microstructure of a hyperbranched polymer and nanoclay loading on the morphology and properties of novel polyurethane nanocomposites. ACS Appl Mater Interfaces. 2008;1(2):289–300.
   Web of Science ®Google Scholar
• Sastry S. The relationship between fragility, configurational entropy and the potential energy landscape of glass-forming liquids. Nature. 2001;409(6817):164–167.
   PubMed Web of Science ®Google Scholar
• Zhang X, Loo LS. Study of glass transition and reinforcement mechanism in polymer/layered silicate nanocomposites. Macromolecules. 2009;42(14):5196–5207.
   Web of Science ®Google Scholar