Publication Cover
Phase Transitions
A Multinational Journal
Volume 90, 2017 - Issue 7
603
Views
11
CrossRef citations to date
0
Altmetric
Research Article

Experimental study on the phase change and thermal properties of paraffin/carbon materials based thermal energy storage materials

, , , &
Pages 717-731 | Received 08 Sep 2016, Accepted 10 Dec 2016, Published online: 13 Jan 2017

References

  • Liu CZ, Rao ZH, Zhao JT, et al. Review on nanoencapsulated phase change materials: preparation, characterization and heat transfer enhancement. Nano Energy. 2015;13:814–826.
  • Zhang P, Xiao X, Ma ZW. A review of the composite phase change materials: fabrication, characterization, mathematical modeling and application to performance enhancement. Appl Energy. 2016;165:472–510.
  • Zhang Y, Du K, Medina MA, et al. An experimental method for validating transient heat transfer mathematical models used for phase change materials (PCMs) calculations. Phase Transit. 2014;87(6):541–558.
  • Kapsalis V, Karamanis D. Solar thermal energy storage and heat pumps with phase change materials. Appl Therm Eng. 2016;99:1212–1224.
  • Xu B, Li P, Chan C, et al. General volume sizing strategy for thermal storage system using phase change material for concentrated solar thermal power plant. Appl Energy. 2015;140:256–268.
  • Chaichan MT, Abaas KI, Kazem HA. Design and assessment of solar concentrator distillating system using phase change materials (PCM) suitable for desertic weathers. Desalination Water Treat. 2016;57(32):14897–14907.
  • Nomura T, Tsubota M, Okinaka N, et al. Improvement on heat release performance of direct-contact heat exchanger using phase change material for recovery of low temperature exhaust heat. ISIJ Int. 2015;55(2):441–447.
  • Shon J, Kim H, Lee K. Improved heat storage rate for an automobile coolant waste heat recovery system using phase-change material in a fin-tube heat exchanger. Appl Energy. 2014;113:680–689.
  • Rao ZH, Wang SF, Zhang YL. Thermal management with phase change material for a power battery under cold temperatures. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. 2014;36(20):2287–2295.
  • Wang Q, Rao Z, Huo Y, et al. Thermal performance of phase change material/oscillating heat pipe-based battery thermal management system. Int J Therm Sci. 2016;102:9–16.
  • Rao ZH, Wang QC, Huang CL. Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system. Appl Energy. 2016;164:659–669.
  • Zhao JT, Rao ZH, Liu CZ, et al. Experimental investigation on thermal performance of phase change material coupled with closed-loop oscillating heat pipe (PCM/CLOHP) used in thermal management. Appl Therm Eng. 2016;93:90–100.
  • Huo YT, Rao ZH. The numerical investigation of nanofluid based cylinder battery thermal management using lattice Boltzmann method. Int J Heat Mass Transfer. 2015;91:374–384.
  • Sahoo SK, Das MK, Rath P. Application of TCE-PCM based heat sinks for cooling of electronic components: a review. Renewable Sustainable Energy Rev. 2016;59:550–582.
  • Wang YQ, Gao XN, Chen P, et al. Preparation and thermal performance of paraffin/Nano-SiO2 nanocomposite for passive thermal protection of electronic devices. Appl Therm Eng. 2016;96:699–707.
  • Tomizawa Y, Sasaki K, Kuroda A, et al. Experimental and numerical study on phase change material (PCM) for thermal management of mobile devices. Appl Therm Eng. 2016;98:320–329.
  • Lee KO, Medina MA, Sun XQ. On the use of plug-and-play walls (PPW) for evaluating thermal enhancement technologies for building enclosures: evaluation of a thin phase change material (PCM) layer. Energy Build. 2015;86:86–92.
  • Feng GH, Huang KL, Xie HL, et al. DSC test error of phase change material (PCM) and its influence on the simulation of the PCM floor. Renewable Energy. 2016;87:1148–1153.
  • Ma ZJ, Lin WY, Sohel MI. Nano-enhanced phase change materials for improved building performance. Renewable Sustainable Energy Rev. 2016;58:1256–1268.
  • Safavi A, Amani-Tehran M, Latifi M. A new approach to theoretical modeling of heat transfer through fibrous layers incorporated with microcapsules of phase change materials. Thermochim Acta. 2015;604:24–32.
  • Kazemi Z, Mortazavi SM. A new method of application of hydrated salts on textiles to achieve thermoregulating properties. Thermochim Acta. 2014;589:56–62.
  • Demirbağ S, Aksoy SA. Encapsulation of phase change materials by complex coacervation to improve thermal performances and flame retardant properties of the cotton fabrics. Fibers Polym. 2016;17(3):408–417.
  • Sharma A, Tyagi VV, Chen CR, et al. Review on thermal energy storage with phase change materials and applications. Renewable Sustainable Energy Rev. 2009;13(2):318–345.
  • Farid MM, Khudhair AM, Razack SAK, et al. A review on phase change energy storage: materials and applications. Energy Convers Manage. 2004;45(9–10):1597–1615.
  • Yuan YP, Zhang N, Tao WQ, et al. Fatty acids as phase change materials: a review. Renewable Sustainable Energy Rev. 2014;29:482–498.
  • Zalba B, Marin JM, Cabeza LF, et al. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications. Appl Therm Eng. 2003;23(3):251–283.
  • Zhong YJ, Guo QG, Li SZ, et al. Heat transfer enhancement of paraffin wax using graphite foam for thermal energy storage. Sol Energy Mater Sol Cells. 2010;94(6):1011–1014.
  • Liu CZ, Rao ZH, Li YM. Composites enhance heat transfer in paraffin/melamine resin microencapsulated phase change materials. Energy Technol. 2016;4(4):496–501.
  • Jesumathy SP, Udayakumar M, Suresh S. Heat transfer characteristics in latent heat storage system using paraffin wax. J Mech Sci Technol. 2012;26(3):959–965.
  • Li TX, Lee JH, Wang RZ, et al. Enhancement of heat transfer for thermal energy storage application using stearic acid nanocomposite with multi-walled carbon nanotubes. Energy. 2013;55:752–761.
  • Tian Y, Zhao CY. A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals. Energy. 2011;36(9):5539–5546.
  • Xiao X, Zhang P, Li M. Preparation and thermal characterization of paraffin/metal foam composite phase change material. Appl Energy. 2013;112:1357–1366.
  • Zhang N, Yuan YP, Yuan YG, et al. Lauric–palmitic–stearic acid/expanded perlite composite as form-stable phase change material: preparation and thermal properties. Energy Build. 2014;82:505–511.
  • Wu S, Zhu D, Zhang X, et al. Preparation and melting/freezing characteristics of Cu/paraffin nanofluid as phase-change material (PCM). Energy Fuels. 2010;24(3):1894–1898.
  • Karaipekli A, Sari A, Kaygusuz K. Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications. Renewable Energy. 2007;32(13):2201–2210.
  • Zhang N, Yuan YP, Du YX, et al. Preparation and properties of palmitic-stearic acid eutectic mixture/expanded graphite composite as phase change material for energy storage. Energy. 2014;78:950–956.
  • Zhong YJ, Li SZ, Wei XH, et al. Heat transfer enhancement of paraffin wax using compressed expanded natural graphite for thermal energy storage. Carbon. 2010;48(1):300–304.
  • Teng TP, Cheng CM, Cheng CP. Performance assessment of heat storage by phase change materials containing MWCNTs and graphite. Appl Therm Eng. 2013;50(1):637–744.
  • Zhang ZG, Fang XM. Study on paraffin/expanded graphite composite phase change thermal energy storage material. Energy Convers Manage. 2006;47(3):303–310.
  • Yuan YP, Zhang N, Li TY, et al. Thermal performance enhancement of palmitic-stearic acid by adding graphene nanoplatelets and expanded graphite for thermal energy storage: a comparative study. Energy. 2016;97:488–497.
  • Zhang N, Yuan YP, Yuan YG, et al. Effect of carbon nanotubes on the thermal behavior of palmitic–stearic acid eutectic mixtures as phase change materials for energy storage. Sol Energy. 2014;110:64–70.
  • Sarı A. Thermal energy storage characteristics of bentonite-based composite PCMs with enhanced thermal conductivity as novel thermal storage building materials. Energy Convers Manage. 2016;117:132–141.
  • Sarı A. Fabrication and thermal characterization of kaolin-based composite phase change materials for latent heat storage in buildings. Energy Build. 2015;96:193–200.
  • Elgafy A, Lafdi K. Effect of carbon nanofiber additives on thermal behavior of phase change materials. Carbon. 2005;43(15):3067–3074.
  • Fukai J, Kanou M, Kodama Y, et al. Thermal conductivity enhancement of energy storage media using carbon fibers. Energy Convers Manage. 2000;41(14):1543–1556.
  • Py X, Olives R, Mauran S. Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material. Int J Heat Mass Transfer. 2001;44(14):2727–2737.
  • Marín JM, Zalba B, Cabeza LF, et al. Improvement of a thermal energy storage using plates with paraffin–graphite composite. Int J Heat Mass Transfer. 2005;48(12):2561–2570.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.