Investigation on the effect of thermal barrier coating at different dosing levels of cerium oxide nanoparticle fuel on diesel in a CI engine

References

• Abedin, M. J., H. H. Masjuki, M. A. Kalam, A. Sanjid, and A. M. Ashraful. 2014. “Combustion, Performance, and Emission Characteristics of Low Heat Rejection Engine Operating on Various Biodiesels and Vegetable Oils.” Energy Conversion and Management 85: 173–189. doi: 10.1016/j.enconman.2014.05.065.
   Web of Science ®Google Scholar
• Abedin, M. J., H. H. Masjuki, M. A. Kalam, A. Sanjid, S. M. Ashrafur Rahman, and B. M. Masum. 2013. “Energy Balance of Internal Combustion Engines Using Alternative Fuels.” Renewable and Sustainable Energy Reviews 26: 20–33. doi: 10.1016/j.rser.2013.05.049.
   Web of Science ®Google Scholar
• ASTM. 2007. “Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.” Annual Book of ASTM Standards 1: 1–10. doi: 10.1520/D0092-12B.
   Google Scholar
• Bengtsson, P., T. Ericsson, and J. Wigren. 1998. “Coated with a Thick Thermal Barrier Coating Thermal Shock Testing of Burner Cans.” Journal of Thermal Spray Technology 7 (3): 340–348. doi:10.1361/105996398770350828.
   Web of Science ®Google Scholar
• Beyerlein, Steven W., and Stanislaw Wojcicki. 1988. “A Lean-burn Catalytic Engine.” doi: 10.4271/880574.
   Google Scholar
• British Standard Section. 2000. “Designation: D445 − 17a Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) 1.” 71 (1). doi: 10.1520/D0445-17A.
   Google Scholar
• Cao, X. Q., R. Vassen, and D. Stoever. 2004. “Ceramic Materials for Thermal Barrier Coatings.” Journal of the European Ceramic Society 24 (1): 1–10. doi: 10.1016/S0955-2219(03)00129-8.
   Web of Science ®Google Scholar
• Chan, S. H., and K. A. Khor. 2000. “Effect of Thermal Barrier Coated Piston Crown on Engine Characteristics.” Journal of Materials Engineering and Performance 9 (1): 103–109. doi: 10.1361/105994900770346358.
   Web of Science ®Google Scholar
• Hejwowski, Tadeusz. 2010. “Comparative Study of Thermal Barrier Coatings for Internal Combustion Engine.” Vacuum 85 (5): 610–616. doi:10.1016/j.vacuum.2010.08.020.
   Web of Science ®Google Scholar
• Hoseini, S. S., G. Najafi, B. Ghobadian, Rizalman Mamat, Nor Azwadi Che Sidik, and W. H. Azmi. 2017. “The Effect of Combustion Management on Diesel Engine Emissions Fueled with Biodiesel-diesel Blends.” Renewable and Sustainable Energy Reviews 73: 307–331. doi: 10.1016/j.rser.2017.01.088.
   Web of Science ®Google Scholar
• Jung, Heejung, David B. Kittelson, and Michael R. Zachariah. 2005. “The Influence of a Cerium Additive on Ultrafine Diesel Particle Emissions and Kinetics of Oxidation.” Combustion and Flame 142 (3): 276–288. doi: 10.1016/j.combustflame.2004.11.015.
   Web of Science ®Google Scholar
• Kamo, Roy, Nagesh S. Mavinahally, Lloyd Kamo, Walter Bryzik, and Earnest E. Schwartz. 1999. “Injection Characteristics That Improve Performance of Ceramic Coated Diesel Engines.” doi: 10.4271/1999-01-0972.
   Google Scholar
• Kannan, G. R., R. Karvembu, and R. Anand. 2011. “Effect of Metal Based Additive on Performance Emission Awend Combustion Characteristics of Diesel Engine Fuelled with Biodiesel.” Applied Energy 88 (11): 3694–3703. doi: 10.1016/j.apenergy.2011.04.043.
   Web of Science ®Google Scholar
• Karikalan, L., and M. Chandrasekaran. 2017. “Performance and Pollutants Analysis on Diesel Engine Using Blends of Jatropha Biodiesel and Mineral Turpentine as Fuel.” International Journal of Environmental Science and Technology 14 (2): 323–330. doi: 10.1007/s13762-016-1147-4.
   Web of Science ®Google Scholar
• Lima, C. R. C., and R. Exaltação Trevisan. 1999. “Temperature Measurements and Adhesion Properties of Plasma Sprayed Thermal Barrier Coatings.” Journal of Thermal Spray Technology 8: 323–327. doi:10.1361/105996399770350548.
   Web of Science ®Google Scholar
• Lima, C. R. C., and J. M. Guilemany. 2007. “Adhesion Improvements of Thermal Barrier Coatings with HVOF Thermally Sprayed Bond Coats.” Surface and Coatings Technology 201 (8): 4694–4701. doi:10.1016/j.surfcoat.2006.10.005.
   Web of Science ®Google Scholar
• Mohamed Musthafa, M., S. P. Sivapirakasam, and M. Udayakumar. 2011. “Comparative Studies on Fly Ash Coated Low Heat Rejection Diesel Engine on Performance and Emission Characteristics Fueled by Rice Bran and Pongamia Methyl Ester and Their Blend with Diesel.” Energy 36 (5): 2343–2351. doi: 10.1016/j.energy.2010.12.047.
   Web of Science ®Google Scholar
• Patnaik, Pragyan P., Shakti P. Jena, Saroj K. Acharya, and Harish C. Das. 2017. “Effect of FeCl3 and Diethyl Ether as Additives on Compression Ignition Engine Emissions.” Sustainable Environment Research 27 (3): 154–161. doi: 10.1016/j.serj.2017.01.002.
   Web of Science ®Google Scholar
• Pundir, B. P. 2007. Engine Emissions: Pollutant Formation and Advances in Control Technology. Oxford: Alpha Science International. https://searchworks.stanford.edu/view/7196858.
   Google Scholar
• Ramalingam, Senthil, Silambarasan Rajendran, and Pranesh Ganesan. 2016. “Performance Improvement and Emission Control in a Direct Injection Diesel Engine Using Nano Catalyst Coated Pistons.” Biofuels 7 (5): 529–535. doi: 10.1080/17597269.2016.1168020.
   Web of Science ®Google Scholar
• Sajith, V., C. B. Sobhan, and G. P. Peterson. 2010. “Experimental Investigations on the Effects of Cerium Oxide Nanoparticle Fuel Additives on Biodiesel.” Advances in Mechanical Engineering 2010. doi:10.1155/2010/581407.
   Google Scholar
• Shaisundaram, V. S., M. Chandrasekaran, S. Mohan Raj, R. Muraliraja, and T. Vinodkumar. 2018. “Control of Carbon Dioxide Emission in Automobile Vehicles Using CO2 Scrubber.” International Journal of Ambient Energy 750: 1–5. doi: 10.1080/01430750.2017.1422149.
   Web of Science ®Google Scholar
• Sivakumar, G., and S. Senthil Kumar. 2014. “Investigation on Effect of Yttria Stabilized Zirconia Coated Piston Crown on Performance and Emission Characteristics of a Diesel Engine.” Alexandria Engineering Journal 53 (4): 787–794. doi: 10.1016/j.aej.2014.08.003.
   Google Scholar
• Skillas, G., Z. Qian, U. Baltensperger, U. Matter, and H. Burtscher. 2000. “Influence of Additives on the Size Distribution and Composition of Particles Produced by Diesel Engines.” Combustion Science and Technology 154 (1): 259–273. doi: 10.1080/00102200008947279.
   Web of Science ®Google Scholar
• Stanmore, Brian, Jean-François Brilhac, Patrick Gilot, and P. Gilot. 1999. “The Ignition and Combustion of Cerium Doped Diesel Soot.” doi:10.4271/1999-01-0115.
   Google Scholar
• Valentine, James M., Jeremy D. Peter-Hoblyn, and G. K. Acres. 2000. “Emissions Reduction and Improved Fuel Economy Performance from a Bimetallic Platinum/Cerium Diesel Fuel Additive at Ultra-low Dose Rates.” doi: 10.4271/2000-01-1934.
   Google Scholar