Advanced search
Publication Cover
International Journal of Ambient Energy Volume 41, 2020 - Issue 7
Submit an article Journal homepage
109
Views
1
CrossRef citations to date
0
Altmetric
Original Articles

Experimental study on interfacial heat-transfer coefficients at the casting/die interface in squeeze casting under transient condition

A. P. VenkateshDepartment of Automobile Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, Tamil Nadu, India
,
K. LogeshDepartment of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, Tamil Nadu, IndiaCorrespondence[email protected]
,
Sirigireddy. Manjith Kumar ReddyDepartment of Automobile Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, Tamil Nadu, India
,
Omer Ahmed KhanDepartment of Automobile Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, Tamil Nadu, India
,
Syed Sadiq Ur RehmanDepartment of Automobile Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, Tamil Nadu, India
&
Koondla Suresh ReddyDepartment of Automobile Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, Tamil Nadu, India
Pages 802-807 | Received 07 May 2018, Accepted 14 Jun 2018, Published online: 11 Jul 2018

References

  • Beck, James V. 1970. “Nonlinear Estimation Applied to the Nonlinear Inverse Heat Conduction Problem.” International Journal of Heat and Mass Transfer 13: 703–716. doi: 10.1016/0017-9310(70)90044-X
  • Blazek, K., H. Yin, G. Skoczylas, M. McClymonds, and M. Frazee. 2011. “Development and Evaluation of Lime-Alumina-Based Mold Powders for Casting High-Aluminum TRIP Steel Grades.” AIST Trans 8: 232–240.
  • Cho, J., K. Blazek, M. vuihFrazee, H. Yin, J. Park, and S. Moon. 2013. “Assessment of CaO–Al2O3 Based Mold Flux System for High Aluminum TRIP Casting.” ISIJ International 53: 62–70. doi: 10.2355/isijinternational.53.62
  • Ho, Kai, and Robert D. Pehlke. 1985. “Metal-Mold Interfacial Heat Transfer.” Metallurgical Transactions B 93: 145–154.
  • Ilkhchy, A. Fardi, M. Jabbari, and P. Davami. 2012. “Effect of Pressure on Heat Transfer Coefficient at the Metal/Mold Interface of A356 Aluminum Alloy.” International Communications in Heat and Mass Transfer 39 (5): 705–712. doi: 10.1016/j.icheatmasstransfer.2012.04.001
  • Koru, M., and O. Serçe. 2016. “Experimental and Numerical Determination of Casting-Mold Interfacial Heat Transfer Coefficient in the High Pressure Die Casting of A-360 Aluminum Alloy.” Acta Physica Polonica A 129: 453–458. doi: 10.12693/APhysPolA.130.453
  • Kuo, Jer-Haur, Ruey-Jer Weng, and Weng-Sing Hwang. 2006. “Effects of Solid Fraction on the Heat Transfer Coefficient at the Casting/Mold Interface for Permanent Mold Casting of AZ91D Magnesium Alloy.” Materials Transactions 47 (10): 2547–2554. doi: 10.2320/matertrans.47.2547
  • Mageshwaran, G., Satyanarayana Rao Polisetti, Jeya Jeevahan, and G. Britto Joseph. 2017. “Enhancement of Uniform Temperature Distribution During Casting Solidification by Methoding Process.” International Journal of Ambient Energy. doi: 10.1080/01430750.2016.1222959.
  • Nishida, Y., W. Droste, and S. Engler. 1986. “The Air-Gap Formation Process at the Casting-Mold Interface and the Heat Transfer Mechanism Through the Gap.” Metallurgical Transactions B 17 (4): 833–844. doi: 10.1007/BF02657147
  • Reddy, G. S., and J. A. Sekhar. 1989. “Moderate Pressure Solidification: Undercooling At Moderate Cooling Rates.” Acta Metallurgica 37 (5): 1509–1519. doi: 10.1016/0001-6160(89)90183-1
  • Sekhar, J. A., G. J. Abbaschian, and R. Mehrabian. 1979. “Effect of Pressure on Metal-Die Heat Transfer Coefficient During Solidification.” Materials Science and Engineering 40: 105–110. doi: 10.1016/0025-5416(79)90014-4
  • Sun, Zhizhong, Henry Hu, and Xiaoping Niu. 2012. “Experimental Study and Numerical Verification of Heat Transfer in Squeeze Casting of Aluminum Alloy A443.” Metallurgical And Materials Transactions B 43 (6): 1676–1683. doi: 10.1007/s11663-012-9730-7
  • Wang, Feifan, Qingxian Ma, Wen Meng, and Zhiqiang Han. 2017. “Experimental Study on the Heat Transfer Behavior and Contact Pressure at the Casting-Mold Interface in Squeeze Casting of Aluminum Alloy.” International Journal of Heat and Mass Transfer 112: 1032–1043. doi: 10.1016/j.ijheatmasstransfer.2017.05.051
  • Zhou, Lejun, Wanlin Wang, and Kechao Zhou. 2016. “A Study of the Heat Transfer Behavior of Mold Fluxes with Different Amounts of Al2O3.” Metals 139: 1–14. doi: 10.3390/met7010001

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.