173
Views
2
CrossRef citations to date
0
Altmetric
Original Articles

Improving photovoltaic panel performance via an autonomous air cooling system – experimental and numerical simulations

, ORCID Icon &
Pages 1387-1403 | Received 23 Mar 2018, Accepted 24 Aug 2018, Published online: 19 Sep 2018

References

  • Alami, Abdul Hai. 2014. “Effects of Evaporative Cooling on Efficiency of Photovoltaic Modules.” Energy Conversion and Management 77: 668–679. doi: 10.1016/j.enconman.2013.10.019
  • Amori, K., and E. H. M. T. Al-Najjar. 2012. “Analysis of Thermal and Electrical Performance of a Hybrid (PV/T) air Based Solar Collector for Iraq.” Applied Energy 98: 384–395. doi: 10.1016/j.apenergy.2012.03.061
  • Armstrong, S., and W. G. Hurley. 2010. “A Thermal Model for Photovoltaic Panels Under Varying Atmospheric Conditions.” Applied Thermal Engineering 30: 1488–1495. doi: 10.1016/j.applthermaleng.2010.03.012
  • Bahaidarah, Haitham M.S. 2016. “Expermimental Performance Evaluation and Modeling of Jet Impingement Cooling for Thermal Management of Photovoltaics.” Solar Energy 135: 605–617. doi: 10.1016/j.solener.2016.06.015
  • Bandou, F., A. Hadj Arab, M. S. Belkaid, P. O. Logerais, O. Riou, and A. Charki. 2015. “Evaluation Performance of Photovoltaic Modules After a Long Time Operation in Saharan Environment.” International Journal of Hydrogen Energy 40: 13839–13848. doi: 10.1016/j.ijhydene.2015.04.091
  • Barroso, J. C. S., N. Barth, J. P. M. Correia, S. Ahzi, and M. A. Khaleel. 2016. “A Computational Analysis of Coupled Thermal and Electrical Behavior of PV Panels.” Solar Energy Materials and Solar Cells 148: 73–86. doi: 10.1016/j.solmat.2015.09.004
  • Bournet, P. E., S. A. Ould Khaoua, and T. Boulard. 2007. “Numerical Prediction of the Effect of Vent Arrangements on the Ventilation and Energy Transfer in a Multi-Span Glasshouse Using a Bi-Band Radiation Model.” Biosystems Engineering 98: 224–234. doi: 10.1016/j.biosystemseng.2007.06.007
  • Brinkworth, B. J., and M. Sandberg. 2006. “Design Procedure for Cooling Ducts to Minimise Efficiency Loss due to Temperature Rise in PV Arrays.” Solar Energy 80: 89–103. doi: 10.1016/j.solener.2005.05.020
  • Cuce, E., and P. M. Cuce. 2014. “Improving Thermodynamic Performance Parameters of Silicon Photovoltaic Cells Via Air Cooling.” International Journal of Ambient Energy 35 (4): 193–199. doi: 10.1080/01430750.2013.793481
  • De Soto, W., S. A. Klein, and W. A. Beckman. 2006. “Improvement and Validation of a Model for Photovoltaic Array Performance.” Solar Energy 80: 78–88. doi: 10.1016/j.solener.2005.06.010
  • Du, Y., C. J. Fell, B. Duck, Dong Chen, Kurt Liffman, Yinan Zhang, Min Gu, and Yonggang Zhu. 2016. “Evaluation of Photovoltaic Panel Temperature in Realistic Scenario.” Energy Conversion and Management 108: 60–67. doi: 10.1016/j.enconman.2015.10.065
  • Fluent Inc. 2001. Fluent v.6.1 user’s guide.
  • Hegazy, A. A. 2000. “Comparative Study of the Performances of Four Photovoltaic/Thermal Solar air Collectors.” Energy Conversion and Management 41: 861–881. doi: 10.1016/S0196-8904(99)00136-3
  • Holman, J. P. 1997. Heat Transfer. 8th ed. New York: McGraw-Hill.
  • Hou, L., Z. Quan, Y. Zhao, L. Wang, and G. Wang. 2016. “An Experimental and Simulative Study on a Novel Photovoltaic-Thermal Collector with Micro Heat Pipe Array (MHPA-PV/T).” Energy and Buildings 124: 60–69. doi: 10.1016/j.enbuild.2016.03.056
  • Ishaque, K., Z. Salam, S. Mekhilef, and A. Shamsudin. 2012. “Parameter Extraction of Solar Photovoltaic Modules Using Penalty-Based Differential Evolution.” Applied Energy 99: 297–308. doi: 10.1016/j.apenergy.2012.05.017
  • Ishaque, K., Z. Salam, H. Taheri, and Syafaruddin. 2011. “Modeling and Simulation of Photovoltaic (PV) System During Partial Shading Based on a Two-Diode Model.” Simulation Modelling Practice and Theory 19: 1613–1626. doi: 10.1016/j.simpat.2011.04.005
  • Karamirad, M., M. Omid, R. Alimardani, H. Mousazadeh, and S. N. Heidari. 2013. “ANN Based Simulation and Experimental Verification of Analytical Four- and Five-Parameters Models of PV Modules.” Simulation Modelling Practice and Theory 34: 86–98. doi: 10.1016/j.simpat.2013.02.001
  • Kelly, N. A. 2013. “The Coupling Factor: A New Metric for Determining and Controlling the Efficiency of Solar Photovoltaic Power Utilization.” International Journal of Hydrogen Energy 38: 2079–2094. doi: 10.1016/j.ijhydene.2012.11.105
  • Khezzar, R., M. Zereg, and A. Khezzar. 2014. “Modeling Improvement of the Four Parameter Model for Photovoltaic Modules.” Solar Energy 110: 452–462. doi: 10.1016/j.solener.2014.09.039
  • Koch, C., M. Ito, and M. Schubert. 2001. “Low-temperature Deposition of Amorphous Silicon Solar Cells.” Solar Energy Materials and Solar Cells 68: 227–236. doi: 10.1016/S0927-0248(00)00249-X
  • Lim, L. H. I., Z. Ye, J. Ye, D. Yang, and H. Du. 2015. “A Linear Method to Extract Diode Model Parameters of Solar Panels From a Single I–V Curve.” Renewable Energy 76: 135–142. doi: 10.1016/j.renene.2014.11.018
  • Lu, Z. H., and Q. Yao. 2007. “Energy Analysis of Silicon Solar Cell Modules Based on an Optical Model for Arbitrary Layers.” Solar Energy 81: 636–647. doi: 10.1016/j.solener.2006.08.014
  • Lucas, M., F. J. Aguilar, J. Ruiz, C. G. Cutillas, A. S. Kaiser, and P. G. Vicente. 2017. “Photovoltaic Evaporative Chimney as a new Alternative to Enhance Solar Cooling.” Renewable Energy 111: 26–37. doi: 10.1016/j.renene.2017.03.087
  • Montero, J. I., A. Muñoz, A. Antón, and N. Iglesias. 2004. “Computational Fluid Dynamic Modeling of Night-Time Energy Fluxes in Unheated Greenhouses.” Acta Horticulturae 691: 403–410.
  • Nebbali, R. 2008. “Modelling of the Dynamics of the Distributed Internal Climate in a Greenhouse.” Ph.D. thesis, University of Franche-Comté, France.
  • Nebbali, R., J. C. Roy, and T. Boulard. 2012. “Dynamic Simulation of the Distributed Radiative and Convective Climate Within a Cropped Greenhouse.” Renewable Energy 43: 111–129. doi: 10.1016/j.renene.2011.12.003
  • Nižetić, S., D. Čoko, A. Yadav, and F. Grubišić-Čabo. 2016. “Water Spray Cooling Technique Applied on a Photovoltaic Panel: The Performance Response.” Energy Conversion and Management 108: 287–296. doi: 10.1016/j.enconman.2015.10.079
  • Nižetić, S., E. Giama, and A. M. Papadopoulos. 2018. “Comprehensive Analysis and General Economic-Environmental Evaluation of Cooling Techniques for7 Photovoltaic Panels, Part II: Active Cooling Techniques.” Energy Conversion and Management 155: 301–323. doi: 10.1016/j.enconman.2017.10.071
  • Notton, G., C. Cristofari, M. Mattei, and P. Poggi. 2005. “Modelling of a Double-Glass Photovoltaic Module Using Finite Differences.” Applied Thermal Engineering 25: 2854–2877. doi: 10.1016/j.applthermaleng.2005.02.008
  • Odeh, S., and M. Behnia. 2009. “Improving Photovoltaic Module Efficiency Using Water Cooling.” Heat Transfer Engineering 30 (06): 499–505. doi: 10.1080/01457630802529214
  • Rahimi, M., P. Valeh-e-Sheyda, M. A. Parsamoghadam, M. M. Masahi, and A. A. Alsairafi. 2014. “Design of a Self-Adjusted Jet Impingement System for Cooling of Photovoltaic Cells.” Energy Conversion and Management 83: 48–57. doi: 10.1016/j.enconman.2014.03.053
  • Royne, A., and C. J. Dey. 2007. “Design of a Jet Impingement Cooling Device for Densely Packed PV Cells Under High Concentration.” Solar Energy 81: 1014–1024. doi: 10.1016/j.solener.2006.11.015
  • Sargunanathan, S., A. Elango, and T. Mohideen. 2016. “Performance Enhancement of Solar Photovoltaic Cells Using Effective Cooling Methods: A Review.” Renewable and Sustainable Energy Reviews 64: 382–393. doi: 10.1016/j.rser.2016.06.024
  • Sarhaddi, F., S. Farahat, H. Ajam, A. Behzadmehr, and M. Mahdavi Adeli. 2010. “An Improved Thermal and Electrical Model for a Solar Photovoltaic Thermal (PV/T) Air Collector.” Applied Energy 87: 2328–2339. doi: 10.1016/j.apenergy.2010.01.001
  • Schiro, F., A. Benato, A. Stoppato, and N. Destro. 2017. “Improving Photovoltaic Efficiency by Water Cooling: Modelling and Experimental Approach.” Energy. In press.
  • Shukla, A., K. Kant, A. Sharma, and P. H. Biwole. 2017. “Cooling Methodologies of Photovoltaic Module for Enhancing Electrical Efficiency: A Review.” Solar Energy Materials and Solar Cells 160: 275–286. doi: 10.1016/j.solmat.2016.10.047
  • Siddiqui, M. U., A. F. M. Arif, L. Kelley, and S. Dubowsky. 2012. “Three-dimensional Thermal Modeling of a Photovoltaic Module Under Varying Conditions.” Solar Energy 86: 2620–2631. doi: 10.1016/j.solener.2012.05.034
  • Skoplaki, E., and J. A. Palyvos. 2009. “On the Temperature Dependence of Photovoltaic Module Electrical Performance: A Review of Efficiency/Power Correlations.” Solar Energy 83: 614–624. doi: 10.1016/j.solener.2008.10.008
  • Sze, S. M. 1981. Physics of Semiconductor Devices. New York: John Wiley& Sons.
  • Teo, H. G., P. S. Lee, and M. N. A. Hawlader. 2012. “An Active Cooling System for Photovoltaic Modules.” Applied Energy 90 (1): 309–315. doi: 10.1016/j.apenergy.2011.01.017
  • Tiwari, A., and M. S. Sodha. 2006. “Performance Evaluation of Solar PV/T System: An Experimental Validation.” Solar Energy 80: 751–759. doi: 10.1016/j.solener.2005.07.006
  • Townsend, T. U. 1981. “A Method for Estimating the Long Term Performance of Characteristics of Solar Cells.” Solar Cells 4: 169–178. doi: 10.1016/0379-6787(81)90067-3
  • Treble, F. 1998. “Milestones in the Development of Crystalline Silicon Solar Cells.” Renewable Energy 15: 473–478. doi: 10.1016/S0960-1481(98)00207-9
  • Ye, M., X. Wang, and Y. Xu. 2009. “Parameter Extraction of Solar Cells Using Particle Swarm Optimization, J.Appl.” Physicist 105: 1–8.
  • Yoann, R. 2014. “Croissance et Physique de structure Photovoltaïque CuInSe2.” Ph.D. thesis, The University of Montpellier 2 Sciences et Techniques, France.
  • Zagrouba, M., A. Sellami, M. Bouaïcha, and M. Ksouri. 2010. “Identification of PV Solar Cells and Modules Parameters Using the Genetic Algorithms: Application to Maximum Power Extraction.” Solar Energy 84: 860–866. doi: 10.1016/j.solener.2010.02.012

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.