Effect of piston bowl geometry on diesel engine performance operated with dairy scum biodiesel

References

• Agarwal, Deepak, Lokesh Kumarb, and Avinash Kumar Agarwal. 2008. “Performance Evaluation of a Vegetable Oil Fuelled Compression Ignition Engine.” Renewable Energy 33: 1147–1156. doi: 10.1016/j.renene.2007.06.017
   Web of Science ®Google Scholar
• Agarwal, Avinash Kumar, Sibendu Som, Pravesh Chandra Shukla, Harsh Goyal, and Douglas Longman. 2015. “In-nozzle Flow and Spray Characteristics for Mineral Diesel, Karanja, and Jatropha Biodiesels.” Applied Energy 156: 138–148. doi: 10.1016/j.apenergy.2015.07.003
   Web of Science ®Google Scholar
• Badami, M., P. Nuccio, and G. Trucco. 1999. “Influence of Injection Pressure on the Performance of a DI Diesel Engine with a Common Rail Fuel Injection System.” International Congress and Exposition Detroit, Michigan, March 1–4, 1999-01-0193.
   Google Scholar
• Behera, Pritinika, and S. Murugan. 2013. “Studies on a Diesel Engine Fuelled with Used Transformer Oil at Different Fuel Injection Nozzle Opening Pressures.” International Journal of Ambient Energy 34 (1): 53–59. doi: 10.1080/01430750.2012.740421
   Google Scholar
• Belagur, Venkanna Krishnamurthy, and Venkataramana C. Reddy. 2010. “Effect of Injector Opening Pressures on the Performance, Emission and Combustion Characteristics of DI Diesel Engine Running on Honne Oil and Diesel Fuel Blend.” Thermal Science 14 (4): 1051–1061. doi: 10.2298/TSCI1004051B
   Web of Science ®Google Scholar
• Channappagoudra, Manjunath, K., Ramesh, and G. Manavendra. 2018a. “Bioethanol Additive Effect on Direct Injection Diesel Engine Performance, Emission and Combustion Characteristics – An Experimental Examination.” International Journal of Ambient Energy. doi:10.1080/01430750.2018.1517665.
   Web of Science ®Google Scholar
• Channappagoudra, Manjunath, K. Ramesh, and G. Manavendra. 2018b. “Effect of Injection Timing on Diesel Engine Performance, Combustion and Emission Characteristics Operated with Dairy Scum Biodiesel.” International Journal of Current Engineering and Technology. E-ISSN 2277-4106, P-ISSN 2347-5161. doi:10.14741/ijcet/v.8.3.5.
   Google Scholar
• Channappagoudra, Manjunath, K. Ramesh, and G. Manavendra. 2018c. “Effect of Injector Opening Pressure on Dairy Scum Biodiesel Operated Diesel Engine.” International Journal of Current Advanced Research 7 (4(L)): 12151–12160. ISSN: O: 2319-6475, ISSN: P: 2319-6505. doi: 10.24327/ijcar.2018.12160.2131
   Google Scholar
• Channappagoudra, M. N., Sunil Thaned, K. Ramesh, and G. Manavendra. 2013. “Optimization of Combustion Chamber Geometry for a Direct Injection Diesel Engine: A Review.” International Journal of Engineering Research & Technology 2 (11). ISSN: 2278-0181.
   Google Scholar
• de Risi, Arturo, Teresa Donateo, and Domenico Laforgia. 2003. “Optimisation of the Combustion Chamber of Direct Injection Diesel Engines.” Society of Automative Engineers. 2003-01-1064.
   Google Scholar
• Geng, Peng, Hongjun Mao, Yanjie Zhang, Lijiang Wei, Kun You, Ji Ju, and Tingkai Chen. 2017. “Combustion Characteristics and NOx Emissions of a Waste Cooking Oil Biodiesel Blend in a Marine Auxiliary Diesel Engine.” Applied Thermal Engineering 115: 947–954. doi: 10.1016/j.applthermaleng.2016.12.113
   Web of Science ®Google Scholar
• Ghodke, Pundlik R., and Jiwak G. Suryawanshi. 2015. “Investigation of Diesel Engine for Low Exhaust Emissions with Different Combustion Chambers.” Thermal Science 19 (6): 2013–2024. doi: 10.2298/TSCI140904176G
   Web of Science ®Google Scholar
• He, Zhixia, Wenjun Zhong, Qian Wang, Zhaochen Jiang, and Zhuang Shao. 2013. “Effect of Nozzle Geometrical and Dynamic Factors on Cavitating and Turbulent Flow in a Diesel Multi-Hole Injector Nozzle.” International Journal of Thermal Sciences 70: 132–143. doi: 10.1016/j.ijthermalsci.2013.03.008
   Web of Science ®Google Scholar
• Hountalas, D. T., D. A. Kouremenos, K. B. Binder, V. Schwarz, and G. C. Mavropoulos. 2003. “Effect of Injection Pressure on the Performance and Exhaust Emissions of a Heavy Duty DI Diesel Engine.” 2003 SAE World Congress Detroit, Michigan, March 3–6.
   Google Scholar
• Hwang, Joonsik, Donghui Qi, Yongjin Jung, and Choongsik Bae. 2014. “Effect of Injection Parameters on the Combustion and Emission Characteristics in a Common-rail Direct Injection Diesel Engine Fueled with Waste Cooking Oil Biodiesel.” Renewable Energy 63: 9–17. doi: 10.1016/j.renene.2013.08.051
   Web of Science ®Google Scholar
• Jafari, B., and D. Domiri Ganji. 2013. “Numerical Investigation in the Effect of Number of Nozzle Hole on Performance and Emission in Dual Fuel Engine.” International Journal of Automotive Engineering 3 (2).
   Google Scholar
• Jaichandar, S., and K. Annamalai. 2012. “Effects of Open Combustion Chamber Geometries on the Performance of Pongamia Biodiesel in a DI Diesel Engine.” Fuel 98: 272–279. doi: 10.1016/j.fuel.2012.04.004
   Web of Science ®Google Scholar
• Jose, D. F. Melvin, B. Durga Prasad, R. Edwin Raj, and Z. Robert Kennedy. 2014. “An Extraction and Performance Analysis of Rubber Seed-Methyl Ester on an IC Engine at Various Compression Ratios.” International Journal of Green Energy 11: 808–821. doi: 10.1080/15435075.2013.830223
   Web of Science ®Google Scholar
• Lahane, Subhash, and K. A. Subramanian. 2014. “Impact of Nozzle Holes Configuration on Fuel Spray, Wall Impingement and NOx Emission of a Diesel Engine for Biodiesel–Diesel Blend (B20).” Applied Thermal Engineering 64: 307–314. doi: 10.1016/j.applthermaleng.2013.12.048
   Web of Science ®Google Scholar
• Mamilla, Venkata Ramesh, M. V. Mallikarjun, and G. Lakshmi Narayana Rao. 2013. “Effect of Combustion Chamber Design on a DI Diesel Engine Fuelled with Jatropha Methyl Esters Blends with Diesel.” Procedia Engineering 64: 479–490. doi: 10.1016/j.proeng.2013.09.122
   Google Scholar
• Mani, M., and G. Nagarajan. 2009. “Influence of Injection Timing on Performance, Emission and Combustion Characteristics of a DI Diesel Engine Running on Waste Plastic Oil.” Energy 34: 1617–1623. doi: 10.1016/j.energy.2009.07.010
   Web of Science ®Google Scholar
• Miraculas, G. Antony, N. Bose, and R. Edwin Raj. 2016. “Optimization of Biofuel Blends and Compression Ratio of a Diesel Engine Fueled with Calophyllum inophyllum Oil Methyl Ester.” Arabian Journal for Science and Engineering 41: 1723–1733. doi: 10.1007/s13369-015-1942-0
   Web of Science ®Google Scholar
• Mohanraj, T., and K. Murugu Mohan Kumar. 2013. “Operating Characteristics of a Variable Compression Ratio Engine Using Esterified Tamanu Oil.” International Journal of Green Energy 10: 285–301. doi: 10.1080/15435075.2011.653849
   Web of Science ®Google Scholar
• Payri, F., J. Benajes, X. Margot, and A. Gil. 2004. “CFD Modeling of the In-Cylinder Flow in Direct-injection Diesel Engines.” Computers & Fluids 33: 995–1021. doi: 10.1016/j.compfluid.2003.09.003
   Web of Science ®Google Scholar
• Prasad, B. V. V. S. U., C. S. Sharma, T. N. C. Anand, and R. V. Ravikrishna. 2011. “High Swirl-Inducing Piston Bowls in Small Diesel Engines for Emission Reduction.” Applied Energy 88: 2355–2367. doi: 10.1016/j.apenergy.2010.12.068
   Web of Science ®Google Scholar
• Ramadhas, A. S., S. Jayaraj, and C. Muraleedharan. 2004. “Use of Vegetable Oils as I.C. Engine Fuels–A Review.” Renewable Energy 29: 727–742. doi: 10.1016/j.renene.2003.09.008
   Web of Science ®Google Scholar
• Reddy, M. Sarveshwar, Nikhil Sharma, and Avinash Kumar Agarwal. 2016. “Effect of Straight Vegetable Oil Blends and Biodiesel Blends on Wear of Mechanical Fuel Injection Equipment of a Constant Speed Diesel Engine.” Renewable Energy 99: 1008–1018. doi: 10.1016/j.renene.2016.07.072
   Web of Science ®Google Scholar
• Selaimia, Radia, Abdelsalem Beghiel, and Rabah Oumeddour. 2015. “The Synthesis of Biodiesel from Vegetable Oil.” Procedia-Social and Behavioral Sciences 195: 1633–1638. doi: 10.1016/j.sbspro.2015.06.221
   Google Scholar
• Senthil, Ramalingam, Rajendran Silambarasan, and Nattan Ravichandiran. 2015. “Influence of Injection Timing and Compression Ratio on Performance, Emission and Combustion Characteristics of Annona Methyl Ester Operated Diesel Engine.” Alexandria Engineering Journal 54: 295–302. doi: 10.1016/j.aej.2015.05.008
   Web of Science ®Google Scholar
• Song, Jino, Chunde Yao, Yike Liu, and Zejun Jiang. 2008. “Investigation on Flow Field in Simplified Piston Bowls for DI Diesel Engine.” Engineering Applications of Computational Fluid Mechanics 2 (3): 354–365. doi: 10.1080/19942060.2008.11015235
   Web of Science ®Google Scholar
• Vairamuthu, G., S. Sundarapandian, and B. Thangagiri. 2015. “Use of Calophyllum inophyllum Biofuel Blended with Diesel in DI Diesel Engine Modified with Nozzle Holes and its Size.” Heat and Mass Transfer. doi:10.1007/s00231-015-1623-2.
   Web of Science ®Google Scholar
• Venkanna, B. K., and C. Venkataramana Reddy. 2011. “Influence of Injector Opening Pressures on the Performance, Emission and Combustion Characteristics of DI Diesel Engine Running on Calophyllum inophyllum Linn Oil (Honne Oil).” International Journal of Renewable Energy 6 (1).
   Google Scholar
• Vijay Kumar, M., A. Veeresh Babu, and P. Ravi Kumar. 2017. “Experimental Investigation on the Effects of Diesel and Mahua Biodiesel Blended Fuel in Direct Injection Diesel Engine Modified by Nozzle Orifice Diameters.” Renewable Energy. doi:10.1016/j.renene.2017.12.007.
   Google Scholar
• Yadav, Ashok Kumar, Mohd Emran Khan, and Amit Pal. 2017. “Kaner Biodiesel Production Through Hybrid Reactor and its Performance Testing on a CI Engine at Different Compression Ratios.” Egyptian Journal of Petroleum 26: 525–532. doi: 10.1016/j.ejpe.2016.07.006
   Google Scholar