References
- Ahmed, H. E., H. A. Mohammed, and M. Z. Yusoff. 2012a. “An Overview on Heat Transfer Augmentation Using Vortex Generators and Nanofluids: Approaches and Applications.” Renewable and Sustainable Energy Reviews 16 (8): 5951–5993. doi: 10.1016/j.rser.2012.06.003.
- Ahmed, H. E., H. A. Mohammed, and M. Z. Yusoff. 2012b. “Heat Transfer Enhancement of Laminar Nanofluids Flow in a Triangular Duct Using Vortex Generator.” Superlattices and Microstructures 52 (3): 398–415. doi: 10.1016/j.spmi.2012.05.023.
- Ahn, Ho Seon, Hyungdae Kim, Hang Jin Jo, Soon Ho Kang, Won Pyo Chang, and Moo Hwan Kim. 2010. “Experimental Study of Critical Heat Flux Enhancement During Forced Convective Flow Boiling of Nanofluid on a Short Heated Surface.” International Journal of Multiphase Flow 36 (5): 375–384. doi: 10.1016/j.ijmultiphaseflow.2010.01.004.
- Akoh, Hiroshi, Yukihiro Tsukasaki, Shigeki Yatsuya, and Akira Tasaki. 1978. “Magnetic Properties of Ferromagnetic Ultrafine Particles Prepared by Vacuum Evaporation on Running Oil Substrate.” Journal of Crystal Growth 45 (C): 495–500. doi: 10.1016/0022-0248(78)90482-7.
- Al-Shamani, Ali Najah, K. Sopian, H. A. Mohammed, Sohif Mat, Mohd Hafidz Ruslan, and Azher M. Abed. 2015. “Enhancement Heat Transfer Characteristics in the Channel with Trapezoidal Rib-groove Using Nanofluids.” Case Studies in Thermal Engineering 5: 48–58. doi: 10.1016/j.csite.2014.12.003.
- Andreozzi, Assunta, Oronzio Manca, Sergio Nardini, and Daniele Ricci. 2016. “Forced Convection Enhancement in Channels with Transversal Ribs and Nanofluids.” Applied Thermal Engineering 98: 1044–1053. doi: 10.1016/j.applthermaleng.2015.12.140.
- ASHARE. 2013. “ASHRAE Standard 55-2010: Thermal Environmental Conditions for Human Occupancy.” American Society of Heating, Refrigeration and Air Conditioning Engineers 58. ISSN 1041-2336.
- Bayat, Javad, and Amir Hossein Nikseresht. 2012. “Thermal Performance and Pressure Drop Analysis of Nanofluids in Turbulent Forced Convective Flows.” International Journal of Thermal Sciences 60: 236–243. doi: 10.1016/j.ijthermalsci.2012.04.012.
- Behnampour, Ali, Omid Ali Akbari, Mohammad Reza Safaei, Mohammad Ghavami, Ali Marzban, Gholamreza Ahmadi Sheikh Shabani, Majid Zarringhalam, and Ramin Mashayekhi. 2017. “Analysis of Heat Transfer and Nanofluid Fluid Flow in Microchannels with Trapezoidal, Rectangular and Triangular Shaped Ribs.” Physica E: Low-dimensional Systems and Nanostructures 91: 15–31. doi: 10.1016/j.physe.2017.04.006.
- Bhuiya, M. M. K., M. S. U. Chowdhury, M. Shahabuddin, M. Saha, and L. A. Memon. 2013. “Thermal Characteristics in a Heat Exchanger Tube Fitted with Triple Twisted Tape Inserts.” International Communications in Heat and Mass Transfer 48: 124–132. doi: 10.1016/j.icheatmasstransfer.2013.08.024.
- Chung, S. J., J. P. Leonard, I. Nettleship, J. K. Lee, Y. Soong, D. V. Martello, and M. K. Chyu. 2009. “Characterization of ZnO Nanoparticle Suspension in Water: Effectiveness of Ultrasonic Dispersion.” Powder Technology 194 (1–2): 75–80. doi: 10.1016/j.powtec.2009.03.025.
- Coleman, Hugh W., and W. Glenn Steele. 2009. Experimentation, Validation, and Uncertainty Analysis for Engineers. 3rd ed. Hoboken, NJ: Wiley. doi: 10.1002/9780470485682.
- Darzi, Rabienataj, Ahmad Ali, Mousa Farhadi, and Kurosh Sedighi. 2014. “Experimental Investigation of Convective Heat Transfer and Friction Factor of Al2O3/Water Nanofluid in Helically Corrugated Tube.” Experimental Thermal and Fluid Science 57: 188–199. doi: 10.1016/j.expthermflusci.2014.04.024.
- Darzi, A., A. Rabienataj, Mousa Farhadi, Kurosh Sedighi, Shahriar Aallahyari, and Mojtaba Aghajani Delavar. 2013. “Turbulent Heat Transfer of Al2O3-Water Nanofluid Inside Helically Corrugated Tubes: Numerical Study.” International Communications in Heat and Mass Transfer 41: 68–75. doi: 10.1016/j.icheatmasstransfer.2012.11.006.
- Darzi, A., A. Rabienataj, Mousa Farhadi, Kurosh Sedighi, Rouzbeh Shafaghat, and Kaveh Zabihi. 2012. “Experimental Investigation of Turbulent Heat Transfer and Flow Characteristics of SiO2/Water Nanofluid Within Helically Corrugated Tubes.” International Communications in Heat and Mass Transfer 39 (9): 1425–1434. doi: 10.1016/j.icheatmasstransfer.2012.07.027.
- Dey, Debashis, Pankaj Kumar, and Sikata Samantaray. 2017. “A Review of Nanofluid Preparation, Stability, and Thermo-physical Properties.” Heat Transfer-Asian Research 46 (8): 1413–1442. doi: 10.1002/htj.21282.
- Dogonchi, A. S., M. Hatami, and G. Domairry. 2015. “Motion Analysis of a Spherical Solid Particle in Plane Couette Newtonian Fluid Flow.” Powder Technology 274: 186–192. doi: 10.1016/j.powtec.2015.01.018.
- Eastman, J. A., U. S. Choi, S. Li, L. J. Thompson, and S. Lee. 1996. “Enhanced Thermal Conductivity Through the Development of Nanofluids.” MRS Proceedings 457: 3. doi: 10.1557/PROC-457-3.
- Eiamsa-Ard, S., and K. Wongcharee. 2013. “Heat Transfer Characteristics in Micro-fin Tube Equipped with Double Twisted Tapes: Effect of Twisted Tape and Micro-fin Tube Arrangements.” Journal of Hydrodynamics 25 (2): 205–214. doi: 10.1016/S1001-6058(13)60355-8.
- Gnielinski, V. 1976. “New Equations for Heat and Mass Transfer in Turbulent Pipe and Channel Flow.” International Chemical Engineering 16 (2): 359–368.
- Han, J. C., and J. S. Park. 1988. “Developing Heat Transfer in Rectangular Channels with Rib Turbulators.” International Journal of Heat and Mass Transfer 31 (1): 183–195. doi: 10.1016/0017-9310(88)90235-9.
- Hatami, M. 2017a. “Nanoparticles Migration Around the Heated Cylinder During the RSM Optimization of a Wavy-wall Enclosure.” Advanced Powder Technology 28 (3): 890–899. doi: 10.1016/j.apt.2016.12.015.
- Hatami, M. 2017b. “Numerical Study of Nanofluids Natural Convection in a Rectangular Cavity Including Heated Fins.” Journal of Molecular Liquids 233: 1–8. doi: 10.1016/j.molliq.2017.02.112.
- Hatami, M., and D. D. Ganji. 2014a. “Motion of a Spherical Particle on a Rotating Parabola Using Lagrangian and High Accuracy Multi-step Differential Transformation Method.” Powder Technology 258: 94–98. doi: 10.1016/j.powtec.2014.03.007.
- Hatami, M., and D. D. Ganji. 2014b. “Motion of a Spherical Particle in a Fluid Forced Vortex by DQM and DTM.” Particuology 16: 206–212. doi: 10.1016/j.partic.2014.01.001.
- Hatami, M., and D. Jing. 2017. “Optimization of Wavy Direct Absorber Solar Collector (WDASC) Using Al2O3-water Nanofluid and RSM Analysis.” Applied Thermal Engineering 121: 1040–1050. doi: 10.1016/j.applthermaleng.2017.04.137.
- Hatami, M., M. Sheikholeslami, and G. Domairry. 2014. “High Accuracy Analysis for Motion of a Spherical Particle in Plane Couette Fluid Flow by Multi-step Differential Transformation Method.” Powder Technology 260: 59–67. doi: 10.1016/j.powtec.2014.02.057.
- Hatami, M., D. Song, and D. Jing. 2016. “Optimization of a Circular-wavy Cavity Filled by Nanofluid Under the Natural Convection Heat Transfer Condition.” International Journal of Heat and Mass Transfer 98: 758–767. doi: 10.1016/j.ijheatmasstransfer.2016.03.063.
- Hatami, M., J. Zhou, J. Geng, and D. Jing. 2018. “Variable Magnetic Field (VMF) Effect on the Heat Transfer of a Half-annulus Cavity Filled by Fe3O4-water Nanofluid under Constant Heat Flux.” Journal of Magnetism and Magnetic Materials 451: 173–182. doi: 10.1016/j.jmmm.2017.10.110.
- Hatami, M., J. Zhou, J. Geng, D. Song, and D. Jing. 2017. “Optimization of a Lid-driven T-shaped Porous Cavity to Improve the Nanofluids Mixed Convection Heat Transfer.” Journal of Molecular Liquids 231: 620–631. doi: 10.1016/j.molliq.2017.02.048.
- Heyhat, M. M., F. Kowsary, A. M. Rashidi, S. Alem Varzane Esfehani, and A. Amrollahi. 2012. “Experimental Investigation of Turbulent Flow and Convective Heat Transfer Characteristics of Alumina Water Nanofluids in Fully Developed Flow Regime.” International Communications in Heat and Mass Transfer 39 (8): 1272–1278. doi: 10.1016/j.icheatmasstransfer.2012.06.024.
- Ho, C. J., M. W. Chen, and Z. W. Li. 2008. “Numerical Simulation of Natural Convection of Nanofluid in a Square Enclosure: Effects Due to Uncertainties of Viscosity and Thermal Conductivity.” International Journal of Heat and Mass Transfer 51 (17–18): 4506–4516. doi: 10.1016/j.ijheatmasstransfer.2007.12.019.
- Khoshvaght-Aliabadi, M., P. Rahnama, A. Zanganeh, and M. H. Akbari. 2016. “Experimental Study on Metallic Water Nanofluids Flow Inside Rectangular Duct Equipped with Circular Pins (Pin Channel).” Experimental Thermal and Fluid Science 72: 18–30. doi: 10.1016/j.expthermflusci.2015.10.029.
- Kumar, Sunil, Alok Darshan Kothiyal, Mangal Singh Bisht, and Anil Kumar. 2017a. “Numerical Analysis of Thermal Hydraulic Performance of Al2O3-H2O Nanofluid Flowing Through a Protrusion Obstacles Square Mini Channel.” Case Studies in Thermal Engineering 9: 108–121. doi: 10.1016/j.csite.2017.01.004.
- Kumar, Sunil, Alok Darshan Kothiyal, Mangal Singh Bisht, and Anil Kumar. 2017b. “Turbulent Heat Transfer and Nanofluid Flow in a Protruded Ribbed Square Passage.” Results in Physics 7: 3603–3618. doi: 10.1016/j.rinp.2017.09.023.
- Lee, Jaeseon, and Issam Mudawar. 2007. “Assessment of the Effectiveness of Nanofluids for Single-phase and Two-phase Heat Transfer in Micro-channels.” International Journal of Heat and Mass Transfer 50 (3–4): 452–463. doi: 10.1016/j.ijheatmasstransfer.2006.08.001.
- Lewis, M. J. 1974. “Roughness Functions, the Thermohydraulic Performance of Rough Surfaces and the Hall Transformation-an Overview.” International Journal of Heat and Mass Transfer 17 (8): 809–814. doi: 10.1016/0017-9310(74)90149-5.
- Lewis, M. J. 1975. “Optimising the Thermohydraulic Performance of Rough Surfaces.” International Journal of Heat and Mass Transfer 18 (11): 1243–1248. doi: 10.1016/0017-9310(75)90232-X.
- Manca, Oronzio, Sergio Nardini, and Daniele Ricci. 2012. “A Numerical Study of Nanofluid Forced Convection in Ribbed Channels.” Applied Thermal Engineering 37: 280–292. doi: 10.1016/j.applthermaleng.2011.11.030.
- Mohammed, H. A., A. N. Al-Shamani, and J. M. Sheriff. 2012. “Thermal and Hydraulic Characteristics of Turbulent Nanofluids Flow in a Rib-groove Channel.” International Communications in Heat and Mass Transfer 39 (10): 1584–1594. doi: 10.1016/j.icheatmasstransfer.2012.10.020.
- Mukherjee, Sayantan, and Somjit Paria. 2013. “Preparation and Stability of Nanofluids – A Review.” IOSR Journal of Mechanicaland Civil Engineering 9 (2): 63–69. doi: 10.9790/1684-0926369.
- Nadda, Rahul, Anil Kumar, and Rajesh Maithani. 2017. “Developing Heat Transfer and Friction Loss in an Impingement Jets Solar Air Heater with Multiple Arc Protrusion Obstacles.” Solar Energy 158: 117–131. doi: 10.1016/j.solener.2017.09.042.
- Nadda, Rahul, Rajesh Maithani, and Anil Kumar. 2017. “Effect of Multiple Arc Protrusion Ribs on Heat Transfer and Fluid Flow of a Circular-jet Impingement Solar Air Passage.” Chemical Engineering and Processing – Process Intensification 120: 114–133. doi: 10.1016/j.cep.2017.07.005.
- Nassan, Taofik H., S. Zeinali Heris, and S. H. Noie. 2010. “A Comparison of Experimental Heat Transfer Characteristics for Al2O3/Water and CuO/Water Nanofluids in Square Cross-section Duct.” International Communications in Heat and Mass Transfer 37 (7): 924–928. doi: 10.1016/j.icheatmasstransfer.2010.04.009.
- Park, Young Chul, Purushothama Chippar, Sang Kyung Kim, Seongyop Lim, Doo Hwan Jung, Hyunchul Ju, and Dong Hyun Peck. 2012. “Effects of Serpentine Flow-field Designs with Different Channel and Rib Widths on the Performance of a Direct Methanol Fuel Cell.” Journal of Power Sources 205: 32–47. doi: 10.1016/j.jpowsour.2011.12.055.
- Parsazadeh, M., H. A. Mohammed, and F. Fathinia. 2013. “Influence of Nanofluid on Turbulent Forced Convective Flow in a Channel with Detached Rib-arrays.” International Communications in Heat and Mass Transfer 46: 97–105. doi: 10.1016/j.icheatmasstransfer.2013.05.006.
- Petukhov, B. S. 1970. “Heat Transfer and Friction in Turbulent Pipe Flow with Variable Physical Properties.” Advances in Heat Transfer 6: 503–564. doi: 10.1016/S0065-2717(08)70153-9.
- Pourmehran, O., M. Rahimi-Gorji, M. Hatami, S. A. R. Sahebi, and G. Domairry. 2015. “Numerical Optimization of Microchannel Heat Sink (MCHS) Performance Cooled by KKL Based Nanofluids in Saturated Porous Medium.” Journal of the Taiwan Institute of Chemical Engineers 55: 49–68. doi: 10.1016/j.jtice.2015.04.016.
- Saeedinia, M., M. A. Akhavan-Behabadi, and M. Nasr. 2012. “Experimental Study on Heat Transfer and Pressure Drop of Nanofluid Flow in a Horizontal Coiled Wire Inserted Tube under Constant Heat Flux.” Experimental Thermal and Fluid Science 36: 158–168. doi: 10.1016/j.expthermflusci.2011.09.009.
- Setia, Hema, Ritu Gupta, and R. K. Wanchoo. 2013. “Stability of Nanofluids.” Materials Science Forum 757: 139–149. doi: 10.4028/www.scientific.net/MSF.757.139.
- Sheikholeslami, M., M. Hatami, and D. D. Ganji. 2015. “Numerical Investigation of Nanofluid Spraying on an Inclined Rotating Disk for Cooling Process.” Journal of Molecular Liquids 211: 577–583. doi: 10.1016/j.molliq.2015.07.006.
- Suresh, S., M. Chandrasekar, and P. Selvakumar. 2012. “Experimental Studies on Heat Transfer and Friction Factor Characteristics of CuO/Water Nanofluid under Laminar Flow in a Helically Dimpled Tube.” Heat and Mass Transfer/Waerme- Und Stoffuebertragung 48 (4): 683–694. doi: 10.1007/s00231-011-0917-2.
- Tang, Wenhui, M. Hatami, Jiandong Zhou, and Dengwei Jing. 2017. “Natural Convection Heat Transfer in a Nanofluid-filled Cavity with Double Sinusoidal Wavy Walls of Various Phase Deviations.” International Journal of Heat and Mass Transfer 115: 430–440. doi: 10.1016/j.ijheatmasstransfer.2017.07.057.
- Vajjha, Ravikanth S., and Debendra K. Das. 2009. “Experimental Determination of Thermal Conductivity of Three Nanofluids and Development of New Correlations.” International Journal of Heat and Mass Transfer 52 (21–22): 4675–4682. doi: 10.1016/j.ijheatmasstransfer.2009.06.027.
- Vatani, Ashkan, and H. A. Mohammed. 2013. “Turbulent Nanofluid Flow Over Periodic Rib-grooved Channels.” Engineering Applications of Computational Fluid Mechanics 7 (3): 369–381. doi: 10.1080/19942060.2013.11015478.
- Wagener, M., B. S. Murty, and B. Guenther. 1997. “Preparation of Metal Nanosuspensions by High-pressure Dc-sputtering on Running Liquids.” Materials Research Society Symposium – Proceedings 457: 149–154. doi: 10.1557/proc-457-149.
- Wang, Lei, Mirko Salewski, and Bengt Sundén. 2010. “Turbulent Flow in a Ribbed Channel: Flow Structures in the Vicinity of a Rib.” Experimental Thermal and Fluid Science 34 (2): 165–176. doi: 10.1016/j.expthermflusci.2009.10.005.
- Webb, R. L., and E. R. G. Eckert. 1972. “Application of Rough Surfaces to Heat Exchanger Design.” International Journal of Heat and Mass Transfer 15 (9): 1647–1658. doi: 10.1016/0017-9310(72)90095-6.
- Webb, R. L., E. R. G. Eckert, and R. J. Goldstein. 1971. “Heat Transfer and Friction in Tubes with Repeated-rib Roughness.” International Journal of Heat and Mass Transfer 14 (4): 601–617. doi: 10.1016/0017-9310(71)90009-3.
- Wen, Dongsheng, and Yulong Ding. 2004. “Experimental Investigation into Convective Heat Transfer of Nanofluids at the Entrance Region under Laminar Flow Conditions.” International Journal of Heat and Mass Transfer 47 (24): 5181–5188. doi: 10.1016/j.ijheatmasstransfer.2004.07.012.
- Xuan, Y., and Q. Li. 2000. “Heat Transfer Enhancement of Nanofluids.” International Journal of Heat and Fluid Flow 21 (1): 58–64. doi: 10.1016/S0142-727X(99)00067-3.
- Yang, Yue Tzu, Hsiang Wen Tang, Bo Yan Zeng, and Mau Hung Jian. 2016. “Numerical Simulation and Optimization of Turbulent Nanofluids in a Three-dimensional Arc Rib-grooved Channel.” Numerical Heat Transfer, Part A: Applications 70 (8): 831–846. doi: 10.1080/10407782.2016.1214513.
- Zeinali Heris, S., M. Nasr Esfahany, and S. Gh Etemad. 2007. “Experimental Investigation of Convective Heat Transfer of Al2O3/Water Nanofluid in Circular Tube.” International Journal of Heat and Fluid Flow 28 (2): 203–210. doi: 10.1016/j.ijheatfluidflow.2006.05.001.
- Zhou, Jiandong, M. Hatami, Dongxing Song, and Dengwei Jing. 2016. “Design of Microchannel Heat Sink with Wavy Channel and Its Time-efficient Optimization with Combined RSM and FVM Methods.” International Journal of Heat and Mass Transfer 103: 715–724. doi: 10.1016/j.ijheatmasstransfer.2016.07.100.