References
- Abd Ali, M. K. 2014. “CFD Simulation of Bubbly Flow Through a Bubble Column.” International Journal of Scientific and Engineering Research 5: 904–910.
- Abdel-Fattah, A. S., S. E. K. Fateen, T. M. Moustafa, and M. M. Fouad. 2016. “Three-dimensional CFD Simulation of Industrial Claus Reactors.” Chemical Engineering Research and Design 112: 78–87. doi: https://doi.org/10.1016/j.cherd.2016.06.011
- Abrar, M. A., A. I. Mahbub, and M. Mamun. 2014. “Design Optimization of a Horizontal Axis Micro Wind Turbine Through Development of CFD Model and Experimentation.” 10th International conference on mechanical engineering, Dhaka, Bangladesh; 2014.
- Airfoiltools. 2019. Accessed November 3. http://airfoiltools.com/.
- Al-Mufti, M. W., U. Hashim, and T. Adam. 2013. “Simulation of Nano lab on Chip Devices by Using COMSOL Multiphysics.” Journal of Applied Sciences Research 9 (2): 1062–1066.
- Arora, S., A. Arora, and P. J. George. 2012. “Design of MEMS Based Microcantilever Using Comsol Multihysics.” International Journal of Applied Engineering Research 7 (11): 1–3.
- Bell, J. S., and B. J. Lewis. 2012. “CANDU Fuel Bundle Deformation Modelling with COMSOL Multiphysics.” Nuclear Engineering and Design 250: 134–141. doi: https://doi.org/10.1016/j.nucengdes.2012.05.015
- Butler, S. L., and G. Sinha. 2012. “Forward Modeling of Applied Geophysics Methods Using Comsol and Comparison with Analytical and Laboratory Analog Models.” Computers & Geosciences 42: 168–176. doi: https://doi.org/10.1016/j.cageo.2011.08.022
- Cai, L., and R. E. White. 2011. “Mathematical Modeling of a Lithium ion Battery with Thermal Effects in COMSOL Inc. Multiphysics (MP) Software.” Journal of Power Sources 196 (14): 5985–5989. doi: https://doi.org/10.1016/j.jpowsour.2011.03.017
- Cao, H., X. Jia, Y. Li, C. Amador, and Y. Ding. 2019. “CFD-DNS Simulation of Irregular-Shaped Particle Dissolution.” Particuology, 1–12.
- Carrizales, M., and L. W. Lake. 2009. “Two-dimensional COMSOL Simulation of Heavy-oil Recovery by Electromagnetic Heating.” COMSOL Conference held in Boston, MA, USA, 10–13.
- Comsol. 2019. Accessed 31 October. https://www.comsol.fr/model/flow-around-an-inclined-naca-0012-airfoil-14629.
- COMSOLMultiphysics. 2019a. Accessed November 3. https://cdn.comsol.com/documentation/5.3.0.316/IntroductionToCOMSOLMultiphysics.pdf.
- COMSOLMultiphysics. 2019b. Accessed November 3. https://s3.amazonaws.com/academia.edu.documents/34675355/01.Introduction_to_COMSOL_Multiphysics.pdf?response-content-disposition=inline%3B%20filename%3D01_Introduction_to_COMSOL_Multiphysics.pdf&X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWOWYYGZ2Y53UL3A%2F20191103%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20191103T125438Z&X-Amz-Expires=3600&X-Amz-SignedHeaders=host&X-Amz-Signature=9b53a677003a56d4b08baca3736b73ba16ce95c242218e2aaec2a45c145d469b.
- Cristea, V. M., E. D. Bâgiu, and PŞ Agachi. 2010. “Simulation and Control of Pollutant Propagation in Someş River Using COMSOL Multiphysics.” In Computer Aided Chemical Engineering 28: 985–990. doi: https://doi.org/10.1016/S1570-7946(10)28165-8
- Darif, M., N. Semmar, and F. Orléans Cedex. 2008. “Numerical Simulation of Si Nanosecond Laser Annealing by COMSOL Multiphysics.” Proceedings of the COMSOL conference 2008, Hannover.
- David, A. 2014. “Rayleigh Distribution-Based Model for Prediction of Wind Energy Potential of Cameroon.” Energy Review 1 (1): 26–43. doi: https://doi.org/10.18488/journal.81/2014.1.1/81.1.26.43
- Diaz-Viera, M. A., D. A. Lopez-Falcon, A. Moctezuma-Berthier, and A. Ortiz-Tapia. 2008. “COMSOL Implementation of a Multiphase Fluid Flow Model in Porous Media.” Proceedings of the COMSOL conference, Boston, MA, USA.
- Elsaady, W., S. O. Oyadiji, and A. Nasser. 2019. “A One-way Coupled Numerical Magnetic Field and CFD Simulation of Viscoplastic Compressible Fluids in MR Dampers.” International Journal of Mechanical Sciences 105265.
- Gerlich, V., K. Sulovská, and M. Zálešák. 2013. “COMSOL Multiphysics Validation as Simulation Software for Heat Transfer Calculation in Buildings: Building Simulation Software Validation.” Measurement 46 (6): 2003–2012. doi: https://doi.org/10.1016/j.measurement.2013.02.020
- Ghose, B., K. Balasubramaniam, C. V. Krishnamurthy, and A. S. Rao. 2010. “Two Dimensional FEM Simulation of Ultrasonic Wave Propagation in Isotropic Solid Media Using COMSOL.” COMSOL conference, Bengaluru, India.
- Holzbecher, E., and H. Si. 2008. “Accuracy Tests for COMSOL-and Delaunay Meshes.” European COMSOL Conference, Hannover.
- Houda, S., R. Belarbi, and N. Zemmouri. 2017. “A CFD Comsol Model for Simulating Complex Urban Flow.” Energy Procedia 139: 373–378. doi: https://doi.org/10.1016/j.egypro.2017.11.224
- Islam, M. R., R. Saidur, and N. A. Rahim. 2011. “Assessment of Wind Energy Potentiality at Kudat and Labuan, Malaysia Using Weibull Distribution Function.” Energy 36 (2): 985–992. doi: https://doi.org/10.1016/j.energy.2010.12.011
- Istardi, D., and A. Triwinarko. 2011. “Induction Heating Process Design Using COMSOL Multiphysics Software.” Telkomnika 9 (2): 327–334. doi: https://doi.org/10.12928/telkomnika.v9i2.704
- Jaegle, M. 2007. “Simulating Thermoelectric Effects with Finite Element Analysis Using COMSOL.” Proceedings ECT, Odessa, 222.
- Jafari, A., M. Hasani, M. Hosseini, and R. Gharibshahi. 2019. “Application of CFD Technique to Simulate Enhanced oil Recovery Processes: Current Status and Future Opportunities.” Petroleum Science 17: 434–456. doi: https://doi.org/10.1007/s12182-019-00363-7
- Keshavarz Moraveji, M., A. Raisi, S. M. Hosseini, E. Esmaeeli, and G. Pazuki. 2013. “CFD Modeling of Hydrophobic Pervaporation Process: Ethanol/Water Separation.” Desalination and Water Treatment 51 (16-18): 3445–3453. doi: https://doi.org/10.1080/19443994.2012.749325
- Kyncl, M. 2011. Numerical Solution of The Three-Dimensional Compressible Flow, Doctoral Dissertation.
- Li, Q., K. Ito, Z. Wu, C. S. Lowry, and S. P. Loheide II. 2009. “COMSOL Multiphysics: A Novel Approach to Ground Water Modeling.” Groundwater 47 (4): 480–487. doi: https://doi.org/10.1111/j.1745-6584.2009.00584.x
- Lissaman, P. B. S. 1983. “Low-Reynolds-number Airfoils.” Annual Review of Fluid Mechanics 15 (1): 223–239. doi: https://doi.org/10.1146/annurev.fl.15.010183.001255
- Loon, L. W., S. S. Reddy, and P. R. AK. 2019. “CFD Simulation of Direct Chill Casting Process of Magnesium Alloy Billets.” Journal of Manufacturing Processes 45: 447–454. doi: https://doi.org/10.1016/j.jmapro.2019.07.033
- Lorenzini, G., and E. Casalena. 2008. “CFD Analysis of Pulsatile Blood Flow in an Atherosclerotic Human Artery with Eccentric Plaques.” Journal of Biomechanics 41 (9): 1862–1870. doi: https://doi.org/10.1016/j.jbiomech.2008.04.009
- Lyon, C., A. Broeren, P. Giguere, A. Gopalarathnam, and M. Selig. 1997. Summary of low-Speed Airfoil Data. Virginia Beach, VA: SoarTech Publications, 1–292.
- Meier, A. 2011. Viscous Fluids, 1–13.
- Meteoblue. 2018a. Accessed 12 July. https://www.meteoblue.com/en/weather/forecast/modelclimate/bandjoun_cameroon_2234904.
- Meteoblue. 2018b. Accessed 12 July. https://www.meteoblue.com/de/wetter/archive/windrose/bangangt%C3%A9_kamerun_2234865.
- Monteiro, J. P., M. R. Silvestre, H. Piggott, and J. C. André. 2013. “Wind Tunnel Testing of a Horizontal Axis Wind Turbine Rotor and Comparison with Simulations From two Blade Element Momentum Codes.” Journal of Wind Engineering and Industrial Aerodynamics 123: 99–106. doi: https://doi.org/10.1016/j.jweia.2013.09.008
- Nandwani, S. K., M. Chakraborty, and S. Gupta. 2019. “Chemical Flooding with Ionic Liquid and Nonionic Surfactant Mixture in Artificially Prepared Carbonate Cores: A Diffusion Controlled CFD Simulation.” Journal of Petroleum Science and Engineering 173: 835–843. doi: https://doi.org/10.1016/j.petrol.2018.10.083
- Pepper, D. W., and X. Wang. 2009. “Benchmarking COMSOL Multiphysics 3.5 a–CFD Problems. a Presentation.” 10: 54, Boston.
- Pishnamazi, M., A. Marjani, S. Shirazian, and M. Samipurgiri. 2012. “Mathematical Modeling and Numerical Simulation of Wastewater Treatment Unit Using CFD.” Oriental Journal of Chemistry 28 (1): 51–58. doi: https://doi.org/10.13005/ojc/280108
- Psu. 2019. Accessed 31 October. https://www.me.psu.edu/cimbala/me433/Links/Table_A_9_CC_Properties_of_Air.pdf.
- Rezakazemi, M., M. Shahverdi, S. Shirazian, T. Mohammadi, and A. Pak. 2011. “CFD Simulation of Water Removal From Water/Ethylene Glycol Mixtures by Pervaporation.” Chemical Engineering Journal 168 (1): 60–67. doi: https://doi.org/10.1016/j.cej.2010.12.034
- Salih, A. N., et al. 2018. “Experimental and Theoretical Investigation of Micro Wind Turbine for low Wind Speed Regions.” Renewable Energy 116: 215–223. doi: https://doi.org/10.1016/j.renene.2017.09.076
- Selig, M., J. Guglielmo, A. Broeren, and P. Giguere. 1995. “Summary of low-Speed Airfoil Data.” 1.
- Sezgin, B., D. G. Caglayan, Y. Devrim, T. Steenberg, and I. Eroglu. 2016. “Modeling and Sensitivity Analysis of High Temperature PEM Fuel Cells by Using Comsol Multiphysics.” International Journal of Hydrogen Energy 41 (23): 10001–10009. doi: https://doi.org/10.1016/j.ijhydene.2016.03.142
- Sofeu, C. L., A. Broban, A. N. Njimah, J. B. Momo, S. A. Sadeuh-Mba, S. Druelles, … M. C. Tejiokem. 2018. “Improving Systematic Rabies Surveillance in Cameroon: A Pilot Initiative and Results for 2014-2016.” PLoS Neglected Tropical Diseases 12 (9): e0006597. doi: https://doi.org/10.1371/journal.pntd.0006597
- Wang, Y.-F., and M.-S. Zhan. 2013. “3-Dimensional CFD Simulation and Analysis on Performance of a Micro-Wind Turbine Resembling Lotus in Shape.” Energy and Buildings 65: 66–74. doi: https://doi.org/10.1016/j.enbuild.2013.05.045
- Wei, Z., and L. K. Weavers. 2016. “Combining COMSOL Modeling with Acoustic Pressure Maps to Design Sono-Reactors.” Ultrasonics Sonochemistry 31: 490–498. doi: https://doi.org/10.1016/j.ultsonch.2016.01.036
- White, L., and S. Wakes. 2014. “Permitting Best use of Wind Resource for Small Wind-Turbines in Rural New Zealand: A Micro-Scale CFD Examination.” Energy for Sustainable Development 21: 1–6. doi: https://doi.org/10.1016/j.esd.2014.04.003