References
- Agarwal, A. K., and T. P. Bajaj. 2009. “Process Optimization of Base Catalyzed Transesterification of Karanja Oil for Biodiesel Production.” International Journal of Oil, Gas and Coal Technology 2: 297–310. doi: https://doi.org/10.1504/IJOGCT.2009.028561
- Ali, Y., and M. A. Hanna. 1994. “Alternative Diesel Fuels from Vegetable Oils.” Bioresource Technology 50: 153–163. doi: https://doi.org/10.1016/0960-8524(94)90068-X
- Antony, J. 2001. “Simultaneous Optimization of Multiple Quality Characteristics in Manufacturing Processes Using Taguchi’s Quality Loss Function.” The International Journal of Advanced Manufacturing Technology 17: 134–138. doi: https://doi.org/10.1007/s001700170201
- Arzamendi, G., I. Campo, E. Arguinarena, M. Sanchez, M. Montes, and L. M. Gandia. 2007. “Synthesis of Biodiesel with Heterogeneous NaOH/Alumina Catalysts. Comparison with Homogeneous NaOH.” Chemical Engineering Journal 134: 123–130. doi: https://doi.org/10.1016/j.cej.2007.03.049
- Baiju, B., M. Naik, and L. Das. 2009. “A Comparative Evaluation of Compression Ignition Engine Characteristics Using Methyl and Ethyl Esters of Karanja Oil.” Renewable Energy 34: 1616–1621. doi: https://doi.org/10.1016/j.renene.2008.11.020
- Bharadwaz, Y. D., G. B. Rao, V. D. Rao, and C. Anusha. 2016. “Improvement of Biodiesel Methanol Blends Performance in A Variable Compression Ratio Engine Using Response Surface Methodology.” Alexandria Engineering Journal 55 (2): 1201–1209. doi: https://doi.org/10.1016/j.aej.2016.04.006
- Chauhan, B. S., N. Kumar, and H. M. Cho. 2012. “A Study on the Performance and Emission of A Diesel Engine Fueled with Jatropha Biodiesel Oil and Its Blends.” Energy 37: 616–622. doi: https://doi.org/10.1016/j.energy.2011.10.043
- Kumar, K. A., G. K. Sharma, M. A. Khan, and A. D. Semwal. 2015. “Optimization of Multigrain Premix for High Protein and Dietary Fibre Biscuits Using Response Surface Methodology Optimization of Multigrain Premix for High Protein and Dietary Fibre Biscuits Using Response Surface Methodology.” Food Nutrition Science 6 (June): 747–756.
- Lam, M. K., K. T. Lee, and A. R. Mohamed. 2010. “Homogeneous, Heterogeneous and Enzymatic Catalysis for Transesterification of High Free Fatty Acid Oil (Waste Cooking Oil) to Biodiesel: A Review.” Biotechnology Advances 28: 500–518. doi: https://doi.org/10.1016/j.biotechadv.2010.03.002
- Meher, L. C., S. N. Naik, and L. M. Das. 2004. “Metanalysis of Pongamia Pinata [Karanja] Oil for Production of Biodiesel.” Journal of Scientific & Industrial Research 63: 913–918.
- Meher, L. C., S. N. Naik, and L. M. Das. 2008. “Production of Biodiesel from High Free Fatty Acid Karanja (Pongamiapinnata) Oil.” Biomass and Bioenergy 32: 354–357. doi: https://doi.org/10.1016/j.biombioe.2007.10.006
- Meher, L. C., D. Vidya Sagar, and S. N. Naik. 2006. “Technical Aspects of Biodiesel Production by Transesterification.” Renewable and Sustainable Energy Reviews 10 (3): 248–268. doi: https://doi.org/10.1016/j.rser.2004.09.002
- Ngamcharussrivichai, C., P. Totarat, and K. Bunyakiat. 2008. “Ca and Zn Mixed Oxide as a Heterogeneous Base Catalyst for Transesterification of Palm Kernel Oil.” Applied Catalysis A: General 341 (1): 77–85. doi: https://doi.org/10.1016/j.apcata.2008.02.020
- Nwafor, O. M. I. 2004. “Emission Characteristics of Diesel Engine Operating on Rapeseed Methyl Ester.” Renewable Energy 29: 119–129. doi: https://doi.org/10.1016/S0960-1481(03)00133-2
- Ozsezen, A. N., M. Canakci, A. Turkcan, and C. Sayin. 2009. “Performance and Combustion Characteristics of A DI Diesel Engine Fueled with Waste Palm Oil and Canola Oil Methyl Esters.” Fuel 88: 629–636. doi: https://doi.org/10.1016/j.fuel.2008.09.023
- Patel, S., K. Patel, F. Neelkanth, V. Thakkar, and R. B. Subramaniam. 2011. “Extraction and Analysis of Jatropha Curcas Seed Oil.” African Journal of Biotechnology 10: 18210–18213.
- Phadke, M. S. 1989. Quality Engineering Using Robust Design. Englewood Cliffs: Prentice-Hall.
- Qi, D. H., H. Chen, L. M. Geng, and Y. Z. Bian. 2010. “Experimental Studies on the Combustion Characteristics and Performance of a Direct Injection Engine Fueled with Biodiesel/Diesel Blends.” Energy Conversion and Management 51: 2985–2992. doi: https://doi.org/10.1016/j.enconman.2010.06.042
- Rao, B. G., Y. D. Bharadwaz, C. Virajitha, and V. D. Rao. 2018. “Effect of Injection Parameters on the Performance and Emission Characteristics of a Variable Compression Ratio Diesel Engine with Plastic Oil Blends – An Experimental Study.” Energy & Environment 29 (4): 492–510. doi: https://doi.org/10.1177/0958305X17753208
- Ross, P. J. 1988. Taguchi Techniques for Quality Engineering. New York: McGraw Hill. vol. 17, pp. 858–75.
- Sani, Y. M., W. M. A. W. Daud, and A. R. Abdul Aziz. 2014. “Activity of Solid Acid Catalysts for Biodiesel Production: A Critical Review.” Applied Catalysis A: General 470: 140–161. doi: https://doi.org/10.1016/j.apcata.2013.10.052
- Sarath Babu, R. T., M. Kannan, and P. Lawrence. 2017. “Performance Analysis of Low Heat Rejection Diesel Engine, Using Mahua Oil Bio Fuel.” International Journal of Ambient Energy 38 (8): 844–848. doi: https://doi.org/10.1080/01430750.2016.1222963
- Satake, K., T. Monaka, S. Yamada, H. Endo, M. Yamagisawa, and T. Abe. 2008. “The Rapid Development of Diesel Engine Using an Optimization of Fuel Injection Control.” Mitsubishi Heavy Industries Limited. Tech Rev 45: 6–10.
- Sharma, A., Y. Singh, A. Tyagi, and N. Singh. 2020. “Sustainability of the Polanga Biodiesel Blends During the Application to the Diesel Engine Performance and Emission Parameters—Taguchi and RSM Approach.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 42 (1): 14. doi: https://doi.org/10.1007/s40430-019-2102-3
- Shroff, H. D., and D. Hodgetts. 2018. Simulation and Optimization of Thermodynamic Processes of Diesel Engine. SAE technical paper, 740194.
- Singh, T. S., and T. N. Verma. 2019. “Taguchi Design Approach for Extraction of Methyl Ester from Waste Cooking Oil Using Synthesized CaO as Heterogeneous Catalyst: Response Surface Methodology Optimization.” Energy Conversion and Management 182 (October 2018): 383–397. doi: https://doi.org/10.1016/j.enconman.2018.12.077
- Su, F., and Y. Guo. 2014. “Advancements in Solid Acid Catalysts for Biodiesel Production.” Green Chemistry 16: 2934–2957. doi: https://doi.org/10.1039/C3GC42333F
- Thiruvengadaravi, K. V., J. Nandagopal, V. S. S. Bala, S. D. Kirupha, P. Vijayalakshmi, and S. Sivanesan. 2009. “Kinetic Study of the Esterification of Free Fatty Acids in Non-Edible Pongamiapinnata Oil Using Acid Catalyst.” Indian Journal of Science and Technology 2: 20–24. doi: https://doi.org/10.17485/ijst/2009/v2i12.4
- Wang, X., Z. Huang, O. A. Kuti, W. Zhang, and K. Nishida. 2010. “Experimental and Analytical Study on Biodiesel and Diesel Spray Characteristics Under Ultra-High Injection Pressure.” International Journal of Heat and Fluid Flow 31 (4): 659–666. doi: https://doi.org/10.1016/j.ijheatfluidflow.2010.03.006
- Xie, W., and L. Zhao. 2013. “Aminopropyl Silica as an Environmentally Friendly and Reusable Catalyst for Biodiesel Production from Soybean Oil.” Fuel 103: 1106–1110. doi: https://doi.org/10.1016/j.fuel.2012.08.031
- Yap, Y. T. H., H. V. Lee, M. Z. Hussein, and R. Yunus. 2011. “Calcium-Based Mixed Oxide Catalysts for Methanolysis of Jatropha Curcas Oil to Biodiesel.” Biomass and Bioenergy 35: 827–834. doi: https://doi.org/10.1016/j.biombioe.2010.11.011
- Zullaikah, S., C. C. Lai, S. R. Vali, and Y. H. Ju. 2005. “A Two-Step Acid-Catalyzed Process for the Production of Biodiesel from Rice Bran Oil.” Bioresource Technology 96 (17): 1889–1896. doi: https://doi.org/10.1016/j.biortech.2005.01.028