10
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Investigation on varied sewage sludge producer gas and methane blend equivalence ratios operated SI engine intact with Miller cycle strategy

ORCID Icon, , ORCID Icon &
Article: 2367107 | Received 29 Sep 2023, Accepted 06 Jun 2024, Published online: 17 Jul 2024

References

  • Biswas, S., D. Kakati, P. Chakraborti, and R. Banerjee. 2022. “Performance-Emission-Stability Mapping of CI Engine in RCCI-PCCI Modes Under Varying Ethanol and CNG Induced Reactivity Profiles: A Comparative Study Through Experimental and Optimization Perspectives.” Energy 254:124231. https://doi.org/10.1016/j.energy.2022.124231.
  • Brequigny, P., E. Pacaud, and C. Mounaïm-Rousselle. 2023. “Performances of a Producer Gas from Sewage Sludge Gasification Enriched with Ammonia in a Spark-Ignition Engine.” Biomass and Bioenergy 171:106731. https://doi.org/10.1016/j.biombioe.2023.106731.
  • Bui, V. G., T. M. T. Bui, Z. Huang, A. T. Hoang, W. Tarelko, X. M. Pham, and Phuoc Quy Phong Nguyen. 2023. “Flexible Syngas-Biogas-Hydrogen Fueling Spark-Ignition Engine Behaviors with Optimized Fuel Compositions and Control Parameters.” International Journal of Hydrogen Energy 48:6722–6737. https://doi.org/10.1016/j.ijhydene.2022.09.133.
  • Carotenuto, A., S. Di Fraia, N. Massarotti, S. Sobek, M. R. Uddin, L. Vanoli, and Sebastian Werle. 2023. “Predictive Modeling for Energy Recovery from Sewage Sludge Gasification.” Energy 263:125838. https://doi.org/10.1016/j.energy.2022.125838.
  • Chen, L., Y. Ge, F. Sun, and C. Wu. 2011. “Finite-time Thermodynamic Modelling and Analysis for an Irreversible Miller Cycle.” International Journal of Ambient Energy 32:87–94. https://doi.org/10.1080/01430750.2011.584457.
  • Chen, Q., Z. Zheng, and Z. Zhu. 2023. “Effects of Syngas Addition on Combustion Characteristics of Gasoline Surrogate Fuel.” ACS Omega 8 (4): 3929–3944.
  • Curto-Risso, P., A. Medina, and A. C. Hernández. 2011. “Optimizing the Geometrical Parameters of a Spark Ignition Engine: Simulation and Theoretical Tools.” Applied Thermal Engineering 31:803–810. https://doi.org/10.1016/j.applthermaleng.2010.10.029.
  • Dahake, M. R., P. S. Gajjal, A. S. Barhatte, and D. N. Malkhede. 2023. “Experimental Exploration of Hydrogen Fuelled Dual Fuelled CRDI Equipped Diesel Engine Coupled with Exhaust Gas Recirculation Using ANN Approach.” International Journal of Ambient Energy 45 (1): 2280732.
  • da Silva Trindade, W. R., and R. G. dos Santos. 2018. “1D Modeling of SI Engine Using n-Butanol as Fuel: Adjust of Fuel Properties and Comparison Between Measurements and Simulation.” Energy Conversion and Management 157:224–238. https://doi.org/10.1016/j.enconman.2017.12.003.
  • Dhaka, A. K., R. Kaushal, and Y. Pal. 2022. “Assessing the Power Generation Potential and Quality of Producer Gas from Blended of the Cotton Stalk and Pistachio Shell in an Open Core Downdraft Gasifier.” International Journal of Ambient Energy 43:8351–8360. https://doi.org/10.1080/01430750.2022.2095532.
  • Di Fraia, S., N. Massarotti, M. R. Uddin, and L. Vanoli. 2022. “Conversion of Sewage Sludge to Combined Heat and Power: Modeling and Optimization.” Smart Energy 5:100061. https://doi.org/10.1016/j.segy.2021.100061.
  • Di Giacomo, G., and P. Romano. 2022. “Evolution and Prospects in Managing Sewage Sludge Resulting from Municipal Wastewater Purification.” Energies 15:5633. https://doi.org/10.3390/en15155633.
  • Fonseca, L., P. Olmeda, R. Novella, and R. M. Valle. 2020. “Internal Combustion Engine Heat Transfer and Wall Temperature Modeling: An Overview.” Archives of Computational Methods in Engineering 27:1661–1679. https://doi.org/10.1007/s11831-019-09361-9.
  • Gao, N., K. Kamran, C. Quan, and P. T. Williams. 2020. “Thermochemical Conversion of Sewage Sludge: A Critical Review.” Progress in Energy and Combustion Science 79:100843. https://doi.org/10.1016/j.pecs.2020.100843.
  • Gupta, S. K., and M. Mittal. 2019. “Effect of Compression Ratio on the Performance and Emission Characteristics, and Cycle-to-Cycle Combustion Variations of a Spark-Ignition Engine Fueled with Bio-Methane Surrogate.” Applied Thermal Engineering 148:1440–1453. https://doi.org/10.1016/j.applthermaleng.2018.11.057.
  • Gurumurthy, V., U. Babu, and L. Kumararaja. 2020. “Performance of SI Engine Fuelled with Producer Gas at Various Spark Timings and Compression Ratios – A Review.” AIP Conference Proceedings: Aip Publishing LLC 2225:050002. https://doi.org/10.1063/5.0005828.
  • Hassan, Q. H., G. S. A. Ridha, K. A. H. Hafedh, and H. A. Alalwan. 2021. “The Impact of Methanol-Diesel Compound on the Performance of a Four-Stroke CI Engine.” Materials Today: Proceedings 42:1993–1999. https://doi.org/10.1016/j.matpr.2020.12.247.
  • Heywood, J. B. 1988. Internal Combustion Engine Fundamentals. New York, St. Louis: McGrawHill Series in Mechanical Engineering (Vol. 21).
  • Heywood, J. B. 2018. Internal Combustion Engine Fundamentals. New York: McGraw-Hill Education.
  • Hoang, S. A., N. Bolan, A. Madhubashani, M. Vithanage, V. Perera, H. Wijesekara, Hailong Wang, et al. 2022. “Treatment Processes to Eliminate Potential Environmental Hazards and Restore Agronomic Value of Sewage Sludge: A Review.” Environmental Pollution 293:118564. https://doi.org/10.1016/j.envpol.2021.118564.
  • Homdoung, N., N. Tippayawong, and N. Dussadee. 2014. “Effect of Ignition Timing Advance on Performance of a Small Producer Gas Engine.” International Journal of Applied Engineering Research 9:2341–2348.
  • Homdoung, N., N. Tippayawong, and N. Dussadee. 2015. “Performance and Emissions of a Modified Small Engine Operated on Producer Gas.” Energy Conversion and Management 94:286–292. https://doi.org/10.1016/j.enconman.2015.01.078.
  • Horlock, J. H. 2013. Advanced Gas Turbine Cycles: A Brief Review of Power Generation Thermodynamics.
  • Jamsran, N., H. Park, J. Lee, S. Oh, C. Kim, Y. Lee, and Kernyong Kang. 2021. “Influence of Syngas Composition on Combustion and Emissions in a Homogeneous Charge Compression Ignition Engine.” Fuel 306:121774. https://doi.org/10.1016/j.fuel.2021.121774.
  • Jena, P., R. Raj, and J. V. Tirkey. 2023. “Thermodynamic Performance Study and RSM Based Optimization of SI Engine Using Sewage Sludge Producer Gas Blend with Methane.” Energy 273:127179. https://doi.org/10.1016/j.energy.2023.127179.
  • Jeong, Y.-S., Y.-K. Choi, K.-B. Park, and J.-S. Kim. 2019. “Air Co-Gasification of Coal and Dried Sewage Sludge in a Two-Stage Gasifier: Effect of Blending Ratio on the Producer Gas Composition and Tar Removal.” Energy 185:708–716. https://doi.org/10.1016/j.energy.2019.07.093.
  • Ji, C., J. Yang, X. Liu, B. Zhang, S. Wang, and B. Gao. 2016. “A Quasi-Dimensional Model for Combustion Performance Prediction of an SI Hydrogen-Enriched Methanol Engine.” International Journal of Hydrogen Energy 41:17676–17686. https://doi.org/10.1016/j.ijhydene.2016.07.146.
  • Kumararaja, L. 2016. “Modelling Equations for the Properties of Producer Gas Generated from Biomass Gasifiers.” International Journal of Applied Mathematical Sciences 9:103–112.
  • Kumaravel, S. T., A. Murugesan, and A. Kumaravel. 2016. “Tyre Pyrolysis Oil as an Alternative Fuel for Diesel Engines – A Review.” Renewable and Sustainable Energy Reviews 60:1678–1685. https://doi.org/10.1016/j.rser.2016.03.035.
  • Lal, S., and S. Mohapatra. 2017. “The Effect of Compression Ratio on the Performance and Emission Characteristics of a Dual Fuel Diesel Engine Using Biomass Derived Producer Gas.” Applied Thermal Engineering 119:63–72. https://doi.org/10.1016/j.applthermaleng.2017.03.038.
  • Li, Y., P. Wang, S. Wang, J. Liu, Y. Xie, and W. Li. 2019. “Quantitative Investigation of the Effects of CR, EGR and Spark Timing Strategies on Performance, Combustion and NOx Emissions Characteristics of a Heavy-Duty Natural Gas Engine Fueled with 99% Methane Content.” Fuel 255:115803. https://doi.org/10.1016/j.fuel.2019.115803.
  • Liang, J., Q. Zhang, Z. Chen, J. Qiao, D. Jia, R. Wang, Qixin Ma, Dazi Shen, et al. 2022. “Experimental Study on Combustion and Emission Characteristics of LIVC Miller Cycle with Asynchronous Intake Valves.” Fuel 329:125377. https://doi.org/10.1016/j.fuel.2022.125377.
  • Ma, F., Y. Wang, M. Wang, H. Liu, J. Wang, S. Ding, and Shuli Zhao. 2008. “Development and Validation of a Quasi-Dimensional Combustion Model for SI Engines Fuelled by HCNG with Variable Hydrogen Fractions.” International Journal of Hydrogen Energy 33:4863–4875. https://doi.org/10.1016/j.ijhydene.2008.06.068.
  • Masoumi, H. R. F., M. Basri, W. S. Samiun, Z. Izadiyan, and C. J. Lim. 2015. “Enhancement of Encapsulation Efficiency of Nanoemulsion-Containing Aripiprazole for the Treatment of Schizophrenia Using Mixture Experimental Design.” International Journal of Nanomedicine 10:6469. https://doi.org/10.2147/IJN.S89364.
  • Mehrnoosh, D., H. A. Asghar, and M. A. Asghar. 2012. “Thermodynamic Model for Prediction of Performance and Emission Characteristics of SI Engine Fuelled by Gasoline and Natural Gas with Experimental Verification.” Journal of Mechanical Science and Technology 26:2213–2225. https://doi.org/10.1007/s12206-012-0303-0.
  • Mishra, S. S., T. Mohapatra, S. S. Sahoo, and P. Mishra. 2022. “Overall Performance Investigation and Optimization of a Multi-Fuel Operated Compression Ignition Engine Using Coupled Taguchi and Grey Relational Analysis.” ACS Omega 7:33216–33232. https://doi.org/10.1021/acsomega.2c03566.
  • Mojaver, P., S. Khalilarya, and A. Chitsaz. 2019. “Multi-objective Optimization Using Response Surface Methodology and Exergy Analysis of a Novel Integrated Biomass Gasification, Solid Oxide Fuel Cell and High-Temperature Sodium Heat Pipe System.” Applied Thermal Engineering 156:627–639. https://doi.org/10.1016/j.applthermaleng.2019.04.104.
  • Moulali, P., H. Tarigonda, and B. Prasad. 2022. “Optimization of Performance Characteristics of Homogeneous Charge Compression Ignition Engine with Biodiesel Using Artificial Neural Network (ANN) and Response Surface Methodology (RSM).” Journal of The Institution of Engineers (India): Series C 103:875–888. https://doi.org/10.1007/s40032-021-00797-2.
  • Nasir, A. S. M., B. Mohamed, and L. Y. Li. 2023. “Comparative Life Cycle Assessment of co-Pyrolysing Sewage Sludge and Wastewater-Grown Microalgae for Biofuel Production.” Resources, Conservation and Recycling 190:106780. https://doi.org/10.1016/j.resconrec.2022.106780.
  • Nautiyal, P., K. Subramanian, M. Dastidar, and A. Kumar. 2020. “Experimental Assessment of Performance, Combustion and Emissions of a Compression Ignition Engine Fuelled with Spirulina Platensis Biodiesel.” Energy 193:116861. https://doi.org/10.1016/j.energy.2019.116861.
  • Nguyen, D.-K., L. Sileghem, and S. Verhelst. 2018. “A Quasi-Dimensional Combustion Model for Spark Ignition Engines Fueled with Gasoline–Methanol Blends.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 232:57–74. https://doi.org/10.1177/0954407017728161.
  • Nguyen, M. D., M. Thomas, A. Surapaneni, E. M. Moon, and N. A. Milne. 2022. “Beneficial Reuse of Water Treatment Sludge in the Context of Circular Economy.” Environmental Technology & Innovation 28: 102651.
  • Papagiannakis, R., and T. Zannis. 2013. “Thermodynamic Analysis of Combustion and Pollutants Formation in a Wood-gas Spark-Ignited Heavy-Duty Engine.” International Journal of Hydrogen Energy 38:12446–12464. https://doi.org/10.1016/j.ijhydene.2013.07.007.
  • Park, H., J. Lee, N. Jamsran, S. Oh, C. Kim, Y. Lee, and Kernyong Kang. 2021. “Comparative Assessment of Stoichiometric and Lean Combustion Modes in Boosted Spark-Ignition Engine Fueled with Syngas.” Energy Conversion and Management 239:114224. https://doi.org/10.1016/j.enconman.2021.114224.
  • Paykani, A., H. Chehrmonavari, A. Tsolakis, T. Alger, W. F. Northrop, and R. D. Reitz. 2022. “Synthesis Gas as a Fuel for Internal Combustion Engines in Transportation.” Progress in Energy and Combustion Science 90:100995. https://doi.org/10.1016/j.pecs.2022.100995.
  • Paykani, A., C. E. Frouzakis, C. Schürch, F. Perini, and K. Boulouchos. 2021. “Computational Optimization of CH4/H2/CO Blends in a Spark-Ignition Engine Using Quasi-Dimensional Combustion Model.” Fuel 303:121281. https://doi.org/10.1016/j.fuel.2021.121281.
  • Percy, A. J., and M. Edwin. 2023. “Studies on the Performance and Emission Characteristics of a Dual Fuel VCR Engine Using Producer Gas as Secondary Fuel: An Optimization Approach Using Response Surface Methodology.” Energy 263:125685. https://doi.org/10.1016/j.energy.2022.125685.
  • Qiao, J., J. Liu, J. Liang, D. Jia, R. Wang, D. Shen, and Xiongbo Duan. 2023. “Experimental Investigation the Effects of Miller Cycle Coupled with Asynchronous Intake Valves on Cycle-to-Cycle Variations and Performance of the SI Engine.” Energy 263:125868. https://doi.org/10.1016/j.energy.2022.125868.
  • Raj, R., J. V. Tirkey, and P. Jena. 2023. “Gasification of Briquette, Mahua Wood, and Coconut Shell and Application to CI Engines: Comparative Performance and Optimisation Analysis.” Industrial Crops and Products 199:116758. https://doi.org/10.1016/j.indcrop.2023.116758.
  • Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, and G. M. Kosmadakis. 2021. “Numerical and Experimental Study by Quasi-Dimensional Modeling of Combustion and Emissions in Variable Compression Ratio High-Speed Spark-Ignition Engine.” Journal of Energy Engineering 147:04021032. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000780.
  • Rao, A., H. Gao, and F. Ma. 2021. “Study of Laminar Burning Speed and Calibration Coefficients of Quasi-Dimensional Combustion Model for Hydrogen Enriched Compressed Natural gas Fueled Internal Combustion Engine Along with Exhaust Gas Recirculation.” Fuel 283:119284. https://doi.org/10.1016/j.fuel.2020.119284.
  • Rao, A., Y. Liu, and F. Ma. 2023. “Numerical Simulation of Nitric Oxide (NO) Emission for HCNG Fueled SI Engine by Zeldovich’, Prompt (HCN) and Nitrous Oxide (N2O) Mechanisms Along with the Error Reduction Novel Sub-Models and Their Classification Through Machine Learning Algorithms.” Fuel 333:126320. https://doi.org/10.1016/j.fuel.2022.126320.
  • Ronda, A., and P. Haro. 2023. “Gómez-Barea A. Sustainability Assessment of Alternative Waste-to-Energy Technologies for the Management of Sewage Sludge.” Waste Management 159:52–62. https://doi.org/10.1016/j.wasman.2023.01.025.
  • Roy, D., S. Samanta, and S. Ghosh. 2020. “Performance Optimization Through Response Surface Methodology of an Integrated Biomass Gasification Based Combined Heat and Power Plant Employing Solid Oxide Fuel Cell and Externally Fired Gas Turbine.” Energy Conversion and Management 222:113182. https://doi.org/10.1016/j.enconman.2020.113182.
  • Salek, F., M. Babaie, S. V. Hosseini, and O. A. Bég. 2021. “Multi-objective Optimization of the Engine Performance and Emissions for a Hydrogen/Gasoline Dual-Fuel Engine Equipped with the Port Water Injection System.” International Journal of Hydrogen Energy 46:10535–10547. https://doi.org/10.1016/j.ijhydene.2020.12.139.
  • Sharma, H., S. K. Mahla, and A. Dhir. 2022. “Effect of Utilization of Hydrogen-Rich Reformed Biogas on the Performance and Emission Characteristics of Common Rail Diesel Engine.” International Journal of Hydrogen Energy 47:10409–10419. https://doi.org/10.1016/j.ijhydene.2022.01.073.
  • Shivapuji, A. M., and S. Dasappa. 2020. “Numerical Assessment of Methane Number and Critical Compression Ratio of Gaseous Alternative Fuels: CFR Engine Quasi Dimensional Simulation Approach.” Thermal Science and Engineering Progress 20:100661. https://doi.org/10.1016/j.tsep.2020.100661.
  • Simsek, S., and S. Uslu. 2020. “Determination of a Diesel Engine Operating Parameters Powered with Canola, Safflower and Waste Vegetable oil Based Biodiesel Combination Using Response Surface Methodology (RSM).” Fuel 270:117496. https://doi.org/10.1016/j.fuel.2020.117496.
  • Singh, P., R. Kumar, S. Sharma, and S. Kumar. 2021. “Effect of Engine Parameters on the Performance of Dual-Fuel CI Engines with Producer Gas—A Review.” Energy & Fuels 35:16377–16402. https://doi.org/10.1021/acs.energyfuels.1c02279.
  • Singh, D. K., R. Raj, J. V. Tirkey, P. Jena, P. Parthasarathy, G. Mckay, and Tareq Al-Ansari. 2023. “Progress and Utilization of Biomass Gasification for Decentralized Energy Generation: An Outlook & Critical Review.” Environmental Technology Reviews 12:1–36. https://doi.org/10.1080/21622515.2023.2242014.
  • Singh, A., S. Sinha, A. K. Choudhary, H. Panchal, M. Elkelawy, and K. K. Sadasivuni. 2020. “Optimization of Performance and Emission Characteristics of CI Engine Fueled with Jatropha Biodiesel Produced Using a Heterogeneous Catalyst (CaO).” Fuel 280:118611. https://doi.org/10.1016/j.fuel.2020.118611.
  • Siti, F., H. K. Azlina, and W. Fernando. 2009. “Continuous Biosynthesis of Biodiesel from Waste Cooking Palm Oil in a Packed bed Reactor: Optimization Using Response Surface Methodology (RSM) and Mass Transfer Studies.” Bioresource Technology 100:710–716. https://doi.org/10.1016/j.biortech.2008.07.031.
  • Sok, R., H. Kataoka, J. Kusaka, A. Miyoshi, and R. D. Reitz. 2023. “A Novel Laminar Flame Speed Equation for Quasi-Dimensional Combustion Model Refinement in Advanced, Ultra-Lean Gasoline Spark-Ignited Engines.” Fuel 333:126508. https://doi.org/10.1016/j.fuel.2022.126508.
  • Szwaja, S., V. B. Kovacs, A. Bereczky, and A. Penninger. 2013. “Sewage Sludge Producer Gas Enriched with Methane as a Fuel to a Spark Ignited Engine.” Fuel Processing Technology 110:160–166. https://doi.org/10.1016/j.fuproc.2012.12.008.
  • Teodosio, L., D. Pirrello, F. Berni, V. De Bellis, R. Lanzafame, and A. D'Adamo. 2018. “Impact of Intake Valve Strategies on Fuel Consumption and Knock Tendency of a Spark Ignition Engine.” Applied Energy 216:91–104. https://doi.org/10.1016/j.apenergy.2018.02.032.
  • Thangaiyan, A. K., and M. M. Mohamed Ibrahim. 2023. “Production of Producer Gas and Its Use as the Supplementary Fuel for SI Engine.” Biomass Conversion and Biorefinery 13 (6): 4741–4749.
  • Tippa, M., G. Yaswanthram, S. Subbiah, and C. Prathap. 2022. “Development of a Comprehensive Laminar Burning Velocity and Flame Instability Profile of Refined Producer Gas (H2: Co: Ch4)–Air Mixtures at Elevated Pressures.” International Journal of Hydrogen Energy 47:36073–36083. https://doi.org/10.1016/j.ijhydene.2022.08.181.
  • Tirkey, J. 2021. “Simulation-Based Investigation of Producer Gas and Propane Blended SI Engine for Power Generation Application.” International Journal of Sustainable Energy 40:344–363. https://doi.org/10.1080/14786451.2020.1811706.
  • Tirkey, J. V. 2022. “Thermodynamic Investigation of Performance and Emission Study of Miller Cycle-Type Engine with the Novel Eccentric Drive Mechanism.” Automotive and Engine Technology 7:137–152. https://doi.org/10.1007/s41104-021-00100-6.
  • Tirkey, J., H. Gupta, and S. Shukla. 2010. “Integrated gas Dynamic Computational Modelling and Thermodynamic Combustion Diagnostics of Multicylinder Four-Stroke Spark Ignition Engine Using Compressed Natural gas as a Fuel.” International Journal of Sustainable Energy 29:59–75. https://doi.org/10.1080/14786460903383468.
  • Tirkey, J. V., and D. K. Singh. 2021. “Performance and Emission Optimization of CI Engine Fueled with Coconut Shell–Based Producer Gas and Diesel by Using Response Surface Methodology.” Biomass Conversion and Biorefinery 1:1–19.
  • Tirkey, J. V., and D. K. Singh. 2022. “Thermodynamic Performance and Emission Prediction of CI Engine Fueled with Diesel and Vachellia Nilotica (Babul) Biomass-Based Producer Gas and Optimization Using RSM.” Petroleum Science and Technology 40:1084–1108. https://doi.org/10.1080/10916466.2021.2010756.
  • Tsiakmakis, S., D. Mertzis, A. Dimaratos, Z. Toumasatos, and Z. Samaras. 2014. “Experimental Study of Combustion in a Spark Ignition Engine Operating with Producer Gas from Various Biomass Feedstocks.” Fuel 122:126–139. https://doi.org/10.1016/j.fuel.2014.01.013.
  • Wang, J., X. Duan, W. Wang, J. Guan, Y. Li, and J. Liu. 2021. “Effects of the Continuous Variable Valve Lift System and Miller Cycle Strategy on the Performance Behavior of the Lean-Burn Natural gas Spark Ignition Engine.” Fuel 297:120762. https://doi.org/10.1016/j.fuel.2021.120762.
  • Wang, Y., G. He, H. Huang, X. Guo, K. Xing, S. Liu, et al. 2023. “Thermodynamic and Exergy Analysis of High Compression Ratio Coupled with Late Intake Valve Closing to Improve Thermal Efficiency of two-Stage Turbocharged Diesel Engines.” Energy 2023:126733.
  • Wasiu, S., R. A. Aziz, and P. Megat. 2018. “Brake Specific Energy Consumption (BSEC) and Emission Characteristics of the Direct Injection Spark Ignition Engine Fuelled by Hydrogen Enriched Compressed Natural gas at Various air-Fuel Ratios.” International Journal of Applied Engineering Research 13:677–683.
  • Wathakit, K., E. Sukjit, C. Kaewbuddee, S. Maithomklang, N. Klinkaew, P. Liplap, Weerachai Arjharn, and Jiraphon Srisertpol. 2021. “Characterization and Impact of Waste Plastic oil in a Variable Compression Ratio Diesel Engine.” Energies 14:2230. https://doi.org/10.3390/en14082230.
  • Wei, H., A. Shao, J. Hua, L. Zhou, and D. Feng. 2018. “Effects of Applying a Miller Cycle with Split Injection on Engine Performance and Knock Resistance in a Downsized Gasoline Engine.” Fuel 214:98–107. https://doi.org/10.1016/j.fuel.2017.11.006.
  • Winterbone, D., and A. Turan. 2015. Advanced Thermodynamics for Engineers. Amsterdam: Butterworth-Heinemann.
  • Xiang, X., G. Gong, C. Wang, N. Cai, X. Zhou, and Y. Li. 2021. “Exergy Analysis of Updraft and Downdraft Fixed bed Gasification of Village-Level Solid Waste.” International Journal of Hydrogen Energy 46:221–233. https://doi.org/10.1016/j.ijhydene.2020.09.247.
  • Xiang, L., G. Theotokatos, and Y. Ding. 2019. “Investigation on Gaseous Fuels Interchangeability with an Extended Zero-Dimensional Engine Model.” Energy Conversion and Management 183:500–514. https://doi.org/10.1016/j.enconman.2019.01.013.
  • Xing, K., H. Huang, X. Guo, Y. Wang, Z. Tu, and J. Li. 2022. “Thermodynamic Analysis of Improving Fuel Consumption of Natural gas Engine by Combining Miller Cycle with High Geometric Compression Ratio.” Energy Conversion and Management 254:115219. https://doi.org/10.1016/j.enconman.2022.115219.
  • Yusaf, T., M. Z. Yusoff, I. Hussein, and S. Fong. 2005. “A Quasi one-Dimensional Simulation of a 4 Stroke Spark Ignition Hydrogen Fuelled Engine.” American Journal of Applied Sciences 2:1206–1212. https://doi.org/10.3844/ajassp.2005.1206.1212.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.