A Numerical Evaluation of the Performance of Film Cooling from a Circular Exit Shaped Hole with Sister Holes Influence

REFERENCES

• Johnson, P.L., Shyam, V., and Hah, C., Reynolds-Averaged Navier–Stokes Solutions to Flat Plate Film Cooling Scenarios, NASA Rept. NASA/TM-2011-217025, Glenn Research Center, Cleveland, OH, 2011.
   Google Scholar
• Bunker, R.S., A Review of Shaped Hole Turbine Film-Cooling Technology, Journal of Heat Transfer, vol. 127, no. 4, pp. 441–453, 2005.
   Web of Science ®Google Scholar
• Goldstein, R.J., Eckert, E.R. G., and Burggraf, F., Effects of Hole Geometry and Density on Three-Dimensional Film Cooling, International Journal of Heat and Mass Transfer, vol. 17, no. 5, pp. 695–607, 1974.
   Web of Science ®Google Scholar
• Takeishi, K., Komiyama, M., Oda, Y., Egawa, Y., and Kitamura, T., Aerothermal Investigations on Mixing Flow Field of Film Cooling with Swirling Coolant Flow, Proc. ASME Turbo Expo Conf., Vancouver, British Columbia, Canada, GT2011-46838, 2011.
   Google Scholar
• Sargison, J.E., Guo, S.M., Oldfield, M.L., Lock, G.D., and Rawlinson, A.J., A Converging Slot-Hole Film-Cooling Geometry—Part 1: Low-Speed Flat-Plate Heat Transfer and Loss, Trans. ASME Journal of Turbomachinery, vol. 124, no. 3, pp. 453–460, 2002.
   Web of Science ®Google Scholar
• Sargison, J.E., Guo, S.M., Oldfield, M.L., Lock, G.D., and Rawlinson, A.J., A Converging Slot-Hole Film-Cooling Geometry—Part 2: Transonic Nozzle Guide Vane Heat Transfer and Loss, Trans. ASME Journal of Turbomachinery, vol. 124, no. 3, pp. 461–471, 2002.
   Web of Science ®Google Scholar
• Sargison, J.E., Guo, S.M., Oldfield, M.L., Lock, G.D., and Rawlinson, A.J., Flow Visualizations of the External Flow from a Converging Slot-Hole Film Cooling Geometry, Experiments in Fluids, vol. 38, no. 3, pp. 304–318, 2005.
   Web of Science ®Google Scholar
• Azzi, A., and Jubran, B.A., Numerical Modelling of Film Cooling from Converging Slot Hole, Heat Mass Transfer, vol. 43, no. 4, pp. 381–388, 2007.
   Web of Science ®Google Scholar
• Baheri Islami, S., Alavi-Tabrizi, S.P., Jubran, B.A., and Esmaeilzadeh, E., Influence of Trenched Shaped Holes on Turbine Blade Leading Edge Film Cooling, Heat Transfer Engineering, vol. 31, no. 10, pp. 889–906, 2010.
   Web of Science ®Google Scholar
• Aga, V., Rose, M., and Abhari, R.S., Experimental Flow Structure Investigation of Compound Angled Film Cooling, Trans. ASME: Journal of Turbomachinery, vol. 130, no. 3, pp. 031005–18, 2008.
   Web of Science ®Google Scholar
• McGovern, K.T., and Leylek, J.H., A Detailed Analysis of Film Cooling Physics: Part II—Compound-Angle Injection With Cylindrical Holes, Trans. ASME: Journal of Turbomachinery, vol. 122, no. 1, pp. 113–121, 2000.
   Web of Science ®Google Scholar
• Kusterer, K., Bohn, D., Sugimoto, T., and Tanaka, R., Double-Jet Ejection of Cooling Air for Improved Film Cooling, Trans. ASME Journal of Turbomachinery, vol. 129, no. 4, pp. 809–815, 2007.
   Web of Science ®Google Scholar
• Kusterer, K., Elyas, A., Bohn, D., Sugimoto, T., Tanaka, R., and Kazari, M., The Nekomimi Cooling Technology: Cooling Holes With Ears for High-Efficient Film Cooling, Proc. ASME Turbo Expo Conf., Vancouver, British Columbia, Canada, GT2011–45524, 2011.
   Google Scholar
• Javadi, A., Javadi, K., Taeibi-Rahni M., and Darbandi, M., A New Approach to Improve Film Cooling Effectiveness Using Combined Jets, Proc. International Gas Turbine Congress, Tokyo, Japan, IGTC2003Tokyo TS-071, pp. 1–9, 2003.
   Google Scholar
• Heidmann, J.D., and Ekkad, S., A Novel Antivortex Turbine Film-Cooling Hole Concept, Trans. ASME Journal of Turbomachinery, vol. 130, no. 3, pp. 031020–19, 2008.
   Web of Science ®Google Scholar
• Soe, M.K., Shui, K.T., and Wu, H., Analysis of Film Cooling Effectiveness on Antivortex Hole, Proc. in Consumer Electronics, Communications and Networks (CECNet), International Conf., IEEE, pp. 4763–4766, 2011.
   Google Scholar
• Ely, M., and Jubran, B.A., A Numerical Study on Increasing Film Cooling Effectiveness Through the Use of Sister Holes, Proc. ASME Turbo Expo Conf., Berlin, Germany, GT2008-50366, pp. 341–350, 2008.
   Google Scholar
• Ely, M., and Jubran, B.A., A Numerical Evaluation on the Effect of Sister Holes on Film Cooling Effectiveness and the Surrounding Flow Field, Heat and Mass Transfer, vol. 45, no. 11, pp. 1435–1446, 2009.
   Web of Science ®Google Scholar
• Ely, M., and Jubran, B.A., A Numerical Study on Improving Large Angle Film Cooling Performance through the Use of Sister Holes, Numerical Heat Transfer, Part A: Applications, vol. 55, no, 7, pp. 634–653, 2009.
   Web of Science ®Google Scholar
• Ely, M., and Jubran, B.A., A Parametric Study on the Effect of Sister Hole Location on Active Film Cooling Flow Control, Proc. ASME Turbo Expo Conf., Glasgow, UK, GT2010-22060, pp. 1301–1311, 2010.
   Google Scholar
• Ely, M., and Jubran, B.A., Film Cooling From Short Holes With Sister Holes Influence, Proc. ASME Turbo Expo Conf., Copenhagen, Denmark, GT2012-68081, 2012.
   Google Scholar
• Haven, B.A., and Kurosaka, M., Kidney and Anti-Kidney Vortices in Cross Flow Jets, Journal of Fluid Mechanics, vol. 352, pp. 27–64, 1997.
   Web of Science ®Google Scholar
• Cain, D., and Duffy, J., An Experimental Investigation of Turbulent Flow in Elliptical Ducts, International Journal of Mechanical Sciences, vol. 13, no. 5, pp. 451–459, 1971.
   Web of Science ®Google Scholar
• Velusamy, K., Garg, V.K., and Vaidyanathan, G., Fully Developed Flow and Heat Transfer in Semi-Elliptical Ducts, International Journal of Heat and Fluid Flow, vol. 16, no. 2, pp.145–152, 1995.
   Web of Science ®Google Scholar
• Voronova, T.V., and Nikitin, N.V., Direct Numerical Simulation of the Turbulent Flow in an Elliptical Pipe, Computational Mathematics and Mathematical Physics, vol. 46, no. 8, pp. 1378–1386, 2006.
   Google Scholar
• Harrison, K., and Bogard, D., Comparison of RANS Turbulence Models for Prediction of Film Cooling Performance, Proc. ASME Turbo Expo Conf., Berlin, Germany, GT2008-51423, 2008.
   Google Scholar
• Hassan, J.S., and Yavuzkurt, S., Comparison of Four Different Two-Equation Models of Turbulence in Predicting Film Cooling Performance, Proc. ASME Turbo Expo Conf., Barcelona, Spain, GT2006-90860, 2006.
   Google Scholar
• Walters, D.K., and Leylek, J.H., A Detailed Analysis of Film-Cooling Physics: Part I—Streamwise Injection with Cylindrical Holes, Trans. ASME: Journal of Turbomachinery, vol. 122, no. 1, pp. 102–112, 2000.
   Web of Science ®Google Scholar
• Na, S., Zhu, B., Bryden, M., and Shih, T.I-P., CFD Analysis of Film Cooling, Proc. 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, AIAA 2006-0022, 2006.
   Google Scholar
• Sinha, A.K., Bogard, D.G., and Crawford, M.E., Film-Cooling Effectiveness Downstream of a Single Row of Holes with Variable Density Ratio, Trans. ASME Journal of Turbomachinery, vol. 113, no. 3, pp. 442–449, 1991.
   Web of Science ®Google Scholar
• Khajehhasani, S., and Jubran, B.A., Film Cooling from Circular and Elliptical Exit Shaped Holes with Sister Hole Influence, Proc. ASME Turbo Expo Conf., San Antonio, TX, GT2013-95138, 2013.
   Google Scholar
• Khajehhasani, S., and Jubran, B.A., Comparison of Various Turbulence Models to Predict Film Cooling Effectiveness from Different Exit Shaped Holes with Sister Holes Influence, Proc. 21st Annual Conference of the CFD Society of Canada, Sherbrooke, Quebec, Canada, 2013.
   Google Scholar
• Azzi, A., and Lakehal, D., Perspectives in Modeling Film Cooling of Turbine Blades by Transcending Conventional Two-Equation Turbulence Models, Trans. ASME Journal of Turbomachinery, vol. 124, no. 3, pp. 472–484, 2002.
   Web of Science ®Google Scholar
• Wilcox, D.C., Turbulence Modeling for CFD, vol. 37, DCW Industries, La Canada, CA, 1998.
   Google Scholar
• Daly, B.J., and Harlow, F.H., Transport Equation in Turbulence, Physics of Fluids Journal, vol. 13, no. 11, pp. 2634–2649, 1970.
   Web of Science ®Google Scholar
• Launder, B.E., and Spalding, D.B., Lectures in Mathematical Models of Turbulence, Academic Press, London, UK, 1972.
   Google Scholar
• ANSYS, Inc., 2011, ANSYS FLUENT User's Guide, ANSYS FLUENT 14.0.0, Cononsburg, PA.
   Google Scholar
• Yakhot, V., and Orszag, S., Renormalization Group Analysis of Turbulence. I. Basic Theory, Journal of Scientific Computing, vol. 1, no. 1, pp. 3–51, 1986.
   Google Scholar
• Shih, T.H., Liou, W.W., Shabbir, A., Yang, Z., and Zhu, J., A New k–ϵ Eddy Viscosity Model for High Reynolds Number Turbulent Flows, Computers & Fluids, vol. 24, no. 3, pp. 227–238, 1995.
   Web of Science ®Google Scholar
• Launder, B.E., and Spalding, D.B., The Numerical Computation of Turbulent Flows, Computer Methods in Applied Mechanics and Engineering, vol. 3, pp. 269–289, 1974.
   Google Scholar
• Wolfshtein, M. The Velocity and Temperature Distribution of One-Dimensional Flow With Turbulence Augmentation and Pressure Gradient, International Journal of Heat Mass Transfer, vol. 12, pp. 301–318, 1969.
   Web of Science ®Google Scholar
• Zhang, X.Z., and Hassan, I., Film Cooling Effectiveness for an Advanced-Louver Cooling Scheme for Gas Turbines, Journal of Thermophysics and Heat Transfer, vol. 20, no. 4, pp. 754–763, 2006.
   Web of Science ®Google Scholar
• Logan Jr., E., and Roy, R., Handbook of Turbomachinery,2nd ed., CRC Press, Marcel Dekker Inc., New York, NY, pp. 170–188, 2003.
   Google Scholar