Liquid Sprays for Heat Transfer Enhancements: A Review

REFERENCES

• Kim J., Spray Cooling Heat Transfer: The State of the Art, International Journal of Heat and Fluid Flow, vol. 28, pp. 753–767, 2010.
   Web of Science ®Google Scholar
• Lefebvre, A.H., Gas Turbine Combustion, 2nd ed., Taylor & Francis, Boca Raton, FL, 1999.
   Google Scholar
• Brenn, G., Helpio, T., and Durst, F., A New Apparatus for the Production of Monodisperse Sprays at High Flow Rates, Chemical Engineering Science, vol. 52, pp. 237–244, 1997.
   Web of Science ®Google Scholar
• Ashgriz, A., and Yao, S.C., Development of a Controlled Spray Generator, Reviews of Scientific Instruments, vol. 58, pp. 1291–1296, 1987.
   Web of Science ®Google Scholar
• Kohnen, B.T., Pieloth, D., Musemic, E., and Walzel, P., Characterization of Full Cone Nozzles, Atomization and Sprays, vol. 21, no. 4, pp. 317–325, 2011.
   Web of Science ®Google Scholar
• Webb, B.W., and Ma, C.F., Single-Phase Liquid Jet Impingement Heat Transfer, Advances in Heat Transfer, vol. 26, pp. 105–217, 1995.
   Google Scholar
• ASTM E1260-05, Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments, Annual Book of ASTM Standards, vol. , pp. 1–5, ASTM International, West Conshohocken, PA, 2005.
   Google Scholar
• ASTM E799-92, Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis, Annual Book of ASTM Standards, vol. , pp. 535–539, ASTM International, West Conshohocken, PA, 1996.
   Google Scholar
• Balakrishnan, N., and Chen, W.W. S., Handbook of Tables for Order Statistics from Lognormal Distributions With Applications, Kluwer, Amsterdam, The Netherlands, 1999.
   Google Scholar
• Bonacina, C., Del Giudice, S., and Comini, G., Dropwise Evaporation, Journal of Heat Transfer, vol. 101, no. 3, pp. 441–446, 1979.
   Web of Science ®Google Scholar
• Beckwith, T.G., Marangoni, R.D., and Lienhard, J.H., Mechanical Measurements, pp. 565–571, Pearson/Prentice Hall, Upper Saddle River, NJ, 2007.
   Google Scholar
• Estes, K.A., and Mudawar, I., Correlation of Sauter Mean Diameter and Critical Heat Flux for Spray Cooling of Small Surfaces, International Journal of Heat and Mass Transfer, vol. 38, no. 16, pp. 2985–2996, 1995.
   Web of Science ®Google Scholar
• Jia, W., and Qiu, H.-H., Experimental Investigation of Droplet Dynamics and Heat Transfer in Spray Cooling, Experimental Thermal & Fluid Science, vol. 27, pp. 829–838, 2003.
   Web of Science ®Google Scholar
• Cheng, W.-L., Han, F.-Y., Liu, Q.-N., Fan, H.-L., Spray Characteristics and Spray Cooling Heat Transfer in the Non-Boiling Regime, Energy, vol. 36, pp. 3399–3405, 2011.
   Web of Science ®Google Scholar
• Choo, Y., and Kang, B., Extraction of Sizes and Velocities of Spray Droplets by Optical Imaging Method, Journal of Mechanical Science & Technology, vol.18, pp. 1236–1245, 2004.
   Google Scholar
• Ireland, A.J., Hochreiter, L.E., and Cheung, F.-B., Droplet Size and Velocity Measurements in a Heated Rod Bundle, Paper No. TED-AJ03-624, in Proceedings 6th ASME-JSME Thermal Engineering Joint Conference, ASME, Hawaii, March 16–20, 2003.
   Google Scholar
• Glover, A.R., Skippon, S.M., and Boyle, R.D., Interferometric Laser Imaging for Droplet Sizing: A Method for Droplet-Size Measurement in Sparse Spray Systems, Applied Optics, vol. 34, no. 36, pp. 8409–8421, 1995.
   PubMed Web of Science ®Google Scholar
• Hardalupas, Y., Sahu, S., Taylor, A.M. K., and Zarogoulidis, K., Simultaneous Planar Measurement of Droplet Velocity and Size With Gas Phase Velocities in a Spray by Combined ILIDS and PIV Techniques, Experiments in Fluids, vol. 49, no. 2, pp. 417–434, 2010.
   Web of Science ®Google Scholar
• Zaidi, S.H., Difficulties in Measuring Liquid Droplet Size Distributions Using Laser Diffraction Technique, Atomization and Sprays, vol. 8, no. 4, pp. 439–452, 1998.
   Web of Science ®Google Scholar
• Martin, A.R., Gleske, J., Katz, I.M., Hartmann, M., Mullinger, B., Haussermann, S. Caillibotte, G., and Scheuch, G., Laser Diffraction Characterization of Droplet Size Distributions Produced by Vibrating Mesh Nebulization in Air and a Helium–Oxygen Mixture, Journal of Aerosol Science, vol. 41(12), pp. 1159–1166, 2010.
   Web of Science ®Google Scholar
• Dahl, H.D., and Muschelknautz, E., Atomization of Liquids and Suspensions With Hollow Cone Nozzle, Chemical Engineering & Technology, vol. 15, pp. 223–231, 1992.
   Google Scholar
• Qiao, Y.M., and Chandra, S., Experiments on Adding a Surfactant to Water Drops Boiling on a Hot Surface, Proceedings of the Royal Society of London, Series A, vol. 453, pp. 673–689, 1997.
   Web of Science ®Google Scholar
• F.A. Morrison, Data Correlation for Drag Coefficient for Sphere, www.chem.mtu.edu/∼fmorriso/DataCorrelationForSphereDrag2010.pdf (retrieved July 26, 2012).
   Google Scholar
• H. Schlichting, Boundary Layer Theory, 7th ed., McGraw-Hill, New York, NY, 1979.
   Google Scholar
• Lichtarowicz, A., Duggins, R.K., and Markland, E., Journal of Mechanical Engineering Science, vol. 7, pp. 210–219, 1965.
   Web of Science ®Google Scholar
• Giffen, E., and Muraszew, A., Atomization of Liquid Fuels, Chapman and Hall, London, UK, 1953.
   Google Scholar
• Abramovich, G.N., Theory of Turbulent Jets, MIT Press, Cambridge, MA, 1963.
   Google Scholar
• Rizk, N.K., and Lefebvre, A.H., Journal of Propulsion and Power, vol. 3, pp. 193–199, 1985.
   Web of Science ®Google Scholar
• Ghodbane, M., and Holman, J.P., Experimental Study of Spray Cooling With Freon-113, International Journal of Heat and Mass Transfer, vol. 34, pp. 1163–1134, 1991.
   Web of Science ®Google Scholar
• Triolet, N., Poelmans, K., Mabelly, P., and Le Papillon, Y., Prevention of Corner Cracks in Slab Continuous Casting, Revue de Metallurgie. Cahiers D’Informations Techniques, vol. 106(11), pp. 508–517, 2009.
   Google Scholar
• Zou, J., and Tseng, A.A., Microscopic Modeling of Fundamental Phase Transformation in Continuous Casting of Steel, Metallurgical Trans. A, vol. 23A, no. 2, pp. 457–467, 1992.
   Web of Science ®Google Scholar
• Nozaki, T., Matsuno, J., and Murata, K., Secondary Cooling Pattern for Preventing Surface Cracks of Continuous Casting Slab, Trans. ISIJ, vol. 18, pp. 330–338, 1978.
   Google Scholar
• Jacobi, H., Kaestle, G., and Wunnenberg, K., Heat Transfer in Cyclic Secondary Cooling During Solidification of Steel, Ironmaking & Steelmaking, vol. 11, no. 3, 132–145, 1984.
   Web of Science ®Google Scholar
• Ueta, H., Saito, T., Kimura, M., Kimura, T., Mine, T., and Nakata, H., Development of Uniform Secondary Mist Cooling Technology for Slab Continuous Casting, Revue de Métallurgie (Paris), vol. 87(6), pp. 573–580, 1990.
   Google Scholar
• Chaudhuri, S., Singh, R.K., Patwari, P., Majumdar, S., Ray, A.K., Singh, A.K. P., and Neogi, N., Design and Implementation of an Automated Secondary Cooling System for the Continuous Casting of Billets, ISA Trans., vol. 49, no. 1, pp. 121–129, 2010.
   PubMed Web of Science ®Google Scholar
• Boyle, R., and Frick, J.W., Audits of Secondary Cooling Systems in Existing Casters as a Method to Enhance Product Quality and Productivity, Iron & Steel Technology, vol. 3, no. 7, pp. 59–66, 2006. (Also, Modern Secondary Cooling Technology in Continuous Casting of Steel, La Metallurgia Italiana, 97, 49–52, 2005.)
   Google Scholar
• Matsukawa, T., Yuhara, S., Kojima, S., Fujiyama, T., Miyagawa, S., and Mabuchi, M., Analysis of Secondary Cooling Phenomena of Continuous Casting, Kawasaki Steel Technical Report (in Japanese), vol. 19, no. 1, pp. 7–11, 1987.
   Google Scholar
• Grothe, H., Radot, J.P., Shima, T., Watters, J., William, F., and Wolf, M., Optimized Strand Cooling and Straightening, in Continuous Casting ‘85, Proceedings of International Conf., Institute of Metal, London, UK, May 22–24, pp. 68.1–68.9, 1985.
   Google Scholar
• Yao, S.C., and Cox, T.L., A General Heat Transfer Correlation for Impacting Water Sprays on High-Temperature Surfaces, Experimental Heat Transfer, vol. 15, pp. 207–219, 2002.
   Web of Science ®Google Scholar
• Wendelstorf, J., Wendelstorf, R., and Spitzer, K.-H., Spray Cooling Heat Transfer and Calculation of Water Impact Density for Cooling of Steel Sheet Materials by Inverse Process Modelling, Steel Research International, vol. 80, no. 9, pp. 639–644, 2009.
   Web of Science ®Google Scholar
• Horsky, J., Raudensky, M., and Tseng, A.A., Heat Transfer Study of Secondary Cooling in Continuous Casting, AISTech 2005—Iron and Steel Technology Conference Proceedings, vol. 2, pp. 141–148, Association of Iron & Steel Technology, Warrendale, PA, 2005 (Iron and Steel Technology Conference & Exposition, May 9–12, 2004, Charlotte, NC).
   Google Scholar
• de Oliveira, M., Ward, J., Garwood, D.R., and Wallis, R.A., Quenching of Aerospace Forgings From High Temperatures Using Air-Assisted, Atomized Water Sprays, Journal of Materials Engineering & Performance, vol. 11, no. 1, pp. 80–85, 2002.
   Web of Science ®Google Scholar
• Wendelstorf, J., Spitzer, K.-H., and Wendelstorf, R., Spray Water Cooling Heat Transfer at High Temperatures and Liquid Mass Fluxes, International Journal of Heat and Mass Transfer, vol. 51, pp. 4902–4910, 2008.
   Web of Science ®Google Scholar
• Raudensky, M., and Horsky, J., Secondary Cooling in Continuous Casting and Leidenfrost Temperature Effects, Ironmaking and Steelmaking, vol. 32, no. 2, pp. 159–164, 2005.
   Web of Science ®Google Scholar
• de Toledo, G.A., Lainez, J., and Cirion, J.C., Model Optimization of Continuous Casting Steel Secondary Cooling, Materials Science & Engineering, vol. A173, pp. 287–291, 1993.
   Google Scholar
• Muller, H., and Jeschar, R., Investigation of Heat Transfer in a Simulated Secondary Cooling Zone in the Continuous Casting Process, Archiv fuer das Eisenhuettenwesen, vol. 44, no. 8, pp. 589–594, 1973.
   Google Scholar
• Santos, C., Cheung, N., Garcia, A., and Spin, J.A., Application of a Solidification Mathematical Model and a Genetic Algorithm in the Optimization of Strand Thermal Profile Along the Continuous Casting of Steel, Materials & Manufacturing Processes, vol. 20, pp. 421–434, 2005.
   Web of Science ®Google Scholar
• Zhang, J., Chen, D., Wang, S., and Long, M., Compensation Control Model of Superheat and Cool Water Temperature for Secondary Cooling of Continuous Casting, Steel Research International, vol. 82, no. 3, pp. 213–221, 2011.
   Web of Science ®Google Scholar
• Zhang, X., Wen, Z., Dou, R., Zhou, G., and Zhang, F., Applied Thermal Engineering, vol. 71, pp. 43–55, 2014.
   Web of Science ®Google Scholar
• Cheng, W.L., Zhang, W.W., Jiang, L.J., Yang, S.L., Hu, L., and Chen, H., Applied Thermal Engineering, vol. 80, pp. 160–167, 2015.
   Web of Science ®Google Scholar
• Bernardin, J.D., and Mudawar, I., International Journal of Heat and Mass Transfer, vol. 40, no. 11, pp. 2579–2593, 1997.
   Web of Science ®Google Scholar
• Thiagarajan, S.J., Narumanchi, S., and Yang, R., International Journal of Heat and Mass Transfer, vol. 69, pp. 493–505, 2014.
   Web of Science ®Google Scholar
• Xie, J.I., Gan, T.N., Duan, F., Yu, S.C. M., and Wu, Y.H., International Journal of Heat and Mass Transfer, vol. 73, pp. 130–140, 2014.
   Web of Science ®Google Scholar
• Tong, L.S., and Tang, Y.S., Boiling Heat Transfer and Two-Phase Flow, 2nd ed., Taylor & Francis, Washington, DC, 1997.
   Google Scholar
• Long, M., and Chen, D, Study on Mitigating Center Macro-Segregation During Steel Continuous Casting Process, Steel Research International, vol. 82, no. 7, pp. 847–856, 2001.
   Web of Science ®Google Scholar
• Long, M., Dong, Z., Chen, D., Liao, Q., and Ma, Y., Effect of Uneven Solidification on the Quality of Continuous Casting Slab, International Journal of Materials and Product Technology, vol. 47, pp. 216–232, 2013.
   Web of Science ®Google Scholar