467
Views
21
CrossRef citations to date
0
Altmetric
feature articles

Flow Boiling Phenomenological Differences Between Micro- and Macroscale Channels

&

REFERENCES

  • Peng, X.F., and Wang, B.-X., Forced Convection and Flow Boiling Heat Transfer for Liquid Flowing Through Microchannels, International Journal of Heat and Mass Transfer, vol. 36, no. 14, pp. 3421–3427, 1993.
  • Bowers, M.B., and Mudawar, I., High Flux Boiling in Low Flow Rate, Low Pressure Drop Mini-Channel and Micro-Channel Heat Sinks, International Journal of Heat and Mass Transfer, vol. 37, no. 2, p. 321–332. 1994.
  • Celata, G.P., Cumo, M., Marconi, V., Mcphail, S.J., and Zummo, G., Microtube Liquid Single-Phase Heat Transfer in Laminar Flow, International Journal of Heat and Mass Transfer, v. 49, p. 3538–3546. 2006.
  • Liu, Z.G., Liang, S.-Q., and Takei, M., Experimental Study on Forced Convective Heat Transfer Characteristics in Quartz Microtube, International Journal of Thermal Sciences, vol. 46, no. 2, pp. 139–148, 2007.
  • Tibiriçá; C.B., and Ribatski, G., Flow Boiling Heat Transfer of R134a and R245fa in a 2.3mm Tube, International Journal of Heat and Mass Transfer, vol. 53, pp. 2459–2468, 2010.
  • Tibiriçá, C.B.; Ribatski, G., and Thome, J.R., Flow Boiling Characteristics for R1234ze in 1.0 and 2.2 mm Circular Channels, ASME Journal of Heat Transfer, vol. 134, p. 020906, 2012.
  • Saraceno, L., Celata, G.P., Furrer, M., Mariani, A., and Zummo, G., Flow Boiling Heat Transfer of Refrigerant FC-72 in Microchannels, International Journal of Thermal Sciences, vol. 53, pp. 35–41, 2012.
  • Liu, Z., and Winterton, R.H. S. A., General Correlation for Saturated and Sub-Cooled Flow Boiling in Tubes and Annuli, Based on a Nucleate Pool Boiling Equation, International Journal of Heat and Mass Transfer, vol. 34, pp. 2759–2766, 1991.
  • Tibiriçá, C.B., and Ribatski, G., Two-Phase Frictional Pressure Drop and Flow Boiling Heat Transfer for R245fa in a 2.3mm Tube, Heat Transfer Engineering, vol. 32, no. 13–14, pp. 1139–1149, 2011.
  • Tibiriçá, C.B., Szczukiewicz, S., Ribatski, G., and Thome, J.R., Critical Heat Flux of R134a and R245fa in a 2.2 mm Circular Tube, Heat Transfer Engineering, vol. 34, pp. 492–499, 2013.
  • Arcanjo, A.A., Tibiriçá, C.B., and Ribatski, G., Evaluation of Flow Patterns and Elongated Bubble Characteristics During the Flow Boiling of Halocarbon Refrigerants in a Micro-Scale Channel, Experimental Thermal and Fluid Science, vol. 34, pp. 766–775, 2010.
  • Tibiriçá, C.B., A Theoretical and Experimental Study on Flow Boiling Heat Transfer and Critical Heat Flux in Microchannels, Doctorate Thesis, Escola de Engenharia de São Carlos (EESC), University of São Paulo, São Carlos, Brazil, 2011.
  • Suo, M., and Grifth, P., Two-Phase Flow in Capillary Tubes, Journal of Basic Engineering, vol. 86, pp. 576–582, 1964.
  • Damianides, C.A., and Westwater, J.W., Two-Phase Flow Patterns in a Compact Heat Exchanger and in Small Tubes, Proc. Second UK National Conference on Heat Transfer, Glasgow, Scotland, 14–16 September, Mechanical Engineering Publications, London, UK, pp. 1257–1268, 1988.
  • Fukano, T., and Kariyasaki, A., Characteristics of Gas–Liquid Two-Phase Flow in a Capillary, Nuclear Engineering Design, vol. 141, pp. 59–68, 1993.
  • Kew, P.A.; and Cornwell, K. Correlations for the Prediction of Boiling Heat Transfer in Small-Diameter Channels, Applied Thermal Engineering, vol. 17, pp. 705–715. 1997.
  • Triplett, K.A.; Ghiaasiaan, S.M.; Abdel-khalik, S.I.; and Sadowski, D.L., Gas-Liquid Two-Phase Flow in Microchannels. Part I: Two-Phase Flow Patterns, International Journal of Multiphase Flow, vol. 25, pp. 377–394, 1999.
  • Ullmann, A., and Brauner, N., The Prediction of Flow Pattern Maps in Mini Channels, Multiphase Science and Technology, vol. 19, pp. 49–73, 2007.
  • Celata, G.P., Cumo, M., Gervasi, M., and Zummo, G. Flow Pattern Analysis of Flow Boiling in Microgravity, Multiphase Science and Technology, vol. 19, pp. 183–210, 2007.
  • Harirchian, T., and Garimella, S.V., A Comprehensive Flow Regime Map for Microchannel Flow Boiling With Quantitative Transition Criteria, International Journal of Heat and Mass Transfer, vol. 53, pp. 2694–2702, 2010.
  • Ong, C.L., and Thome, J.R., Macro-to-Microchannel Transition in Two-Phase Flow: Part 1—Two-Phase Flow Patterns and Film Thickness Measurements, Experimental Thermal and Fluid Science, 35, 37–47, 2011.
  • Kandlikar, S.G., Scale Effects on Flow Boiling in Microchannels: A Fundamental Perspective, International Journal of Thermal Sciences, vol. 49, no. 7, pp. 1073–1085, 2010.
  • Hulburt, E., and Newell, T. Prediction of The Circumferential Film Thickness Distribution in Horizontal Annular Gas–Liquid Flow, Journal of Fluids Engineering, vol. 122, pp. 396–402, 2000.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.