Thermal Design of a Spray-Based Heat Sink Integrated With a Compact Vapor Compression Cooling System for Removal of High Heat Fluxes

REFERENCES

• Mudawar, I., Assessment of High-Heat-Flux Thermal Management Schemes, IEEE Transactions on Components and Packaging Technologies, vol. 24, no. 2, pp. 122–141, 2001.
   Web of Science ®Google Scholar
• Bar-Cohen, A., Completing the Inward Migration—The Transformative Nature of Embedded Cooling, Keynote lecture, ASME Summer Heat Transfer Conference, Minneapolis, MN, July 14–19, 2013.
   Google Scholar
• Mongia, R., Masahiro, K., Distefano, E., Barry, J., Chen, W., Izenson, M., Possamai, F., Zimmermann, A., and Mochizuki, M., Small Scale Refrigeration System for Electronics Cooling within a Notebook Computer, Proceedings of the ITHERM 2006, San Diego, CA, pp. 751–758, 2006.
   Google Scholar
• Ebadian, M.A., and Lin, C.X., A Review of High-Heat-Flux Heat Removal Technologies, Journal of Heat Transfer, vol. 133, no. 11, pp. 110801-1–10801-11, 2011.
   Web of Science ®Google Scholar
• Mancin, S., Zilio, C., Righetti, G., and Rossetto, L., Mini Vapor Cycle System for High Density Electronic Cooling Applications, International Journal of Refrigeration, vol. 36, no. 4, pp. 1191–1202, 2013.
   Web of Science ®Google Scholar
• Tigner, J., Sedeh, M.M., Sharpe, T., Bufford, A., and Floyd-Smith, T., Analysis of a Platform for Thermal Management Studies of Microelectronics Cooling Methods, Applied Thermal Engineering, vol. 60, no. 1–2, pp. 88–95, 2013.
   Web of Science ®Google Scholar
• Ortega, A., and Birle, J.R., The Evolution of Air Cooling in Electronic Systems and Observations About its Limits, Proceedings of the 18th National & 7th ISHMT-ASME Heat And Mass Transfer Conference, Guwahati, India, Paper K10, 2006.
   Google Scholar
• Cremaschi, L., Groll, E.A., and Garimella, S.V., Performance Potential and Challenges of Future Refrigeration-Based Electronics Cooling Approaches, Proceedings of THERMES 2007 Conference, Santa Fe, NM, pp. 119–128, 2007.
   Google Scholar
• Trutassanawin, S., Groll, E., Garimella, S.V., and Cremaschi, L., Experimental Investigation of a Miniature-Scale Refrigeration System for Electronics Cooling, IEEE Transactions on Components and Packaging Technologies, vol. 29, no. 3, pp. 678–687, 2006.
   Web of Science ®Google Scholar
• Heydari, A., Miniature Vapor Compression Refrigeration System for Active Cooling of High Performance Computers, Proceedings of the ITHERM 2002, San Diego, CA, pp. 371–378, 2002.
   Google Scholar
• Barbosa, J.R. , Jr., Ribeiro, G.B., and Oliveira, P.A., A State-of-the-Art Review of Compact Vapor Compression Refrigeration Systems and Their Applications, Heat Transfer Engineering, vol. 33, no. 4–5, pp. 356–374, 2012.
   Web of Science ®Google Scholar
• Bar-Cohen, A., Arik, M., and Ohadi, M., Direct Liquid Cooling of High Flux Micro and Nano Electronic Components, Proceedings of the IEEE, vol. 94, no. 8, pp. 1549–1570, 2006.
   Web of Science ®Google Scholar
• Agostini, B., Fabbri, M., Park, J.E., Wojtan, L., Thome, J.R., and Michel, B., State of the Art of Heat Flux Cooling Technologies, Heat Transfer Engineering, vol. 28, no. 4, pp. 258–281, 2007.
   Web of Science ®Google Scholar
• Kandlikar, S.G., and Bapat, A.V., Evaluation of Jet Impingement, Spray and Microchannel Chip Cooling Options for High Heat Flux Removal, Heat Transfer Engineering, vol. 28, no. 11, pp. 911–923, 2007.
   Web of Science ®Google Scholar
• Anandan, S.S., and Ramalingam, V., Thermal Management of Electronics: A Review of Literature, Thermal Science, vol. 12, no. 2, pp. 5–26, 2008.
   Web of Science ®Google Scholar
• Tullius, J.F., Vajtai, R., and Bayazitoglu, Y., A Review of Cooling in Microchannels, Heat Transfer Engineering, vol. 32, no. 7–8, pp. 527–541, 2011.
   Web of Science ®Google Scholar
• Marcinichen, J.B., Olivier, J.A., Lamaison, N., and Thome, J.R., Advances in Electronics Cooling, Heat Transfer Engineering, vol. 34, no. 5–6, pp. 434–446, 2013.
   Web of Science ®Google Scholar
• Ribeiro, G.B., Barbosa, J.R. , Jr., and Prata, A.T., Mini-Channel Evaporator/Heat Pipe Assembly for a Chip Cooling Vapor Compression Refrigeration System, International Journal of Refrigeration, vol. 33, no. 7, pp. 1402–1412, 2010.
   Web of Science ®Google Scholar
• Shedd, T.A., Next Generation Spray Cooling: High Heat Flux Management in Compact Spaces, Heat Transfer Engineering, vol. 28, no. 2, pp. 87–92, 2007.
   Web of Science ®Google Scholar
• Kim, J., Spray Cooling Heat Transfer: The State of the Art, International Journal of Heat and Fluid Flow, vol. 28, no. 4, pp. 753–767, 2007.
   Web of Science ®Google Scholar
• Duursma, G., Sefiane, K., and Kennedy, A., Experimental Studies of Nanofluid Droplets in Spray Cooling, Heat Transfer Engineering, vol. 30, no. 13, pp. 1108–1120, 2009.
   Web of Science ®Google Scholar
• Wang, Y., Liu, M., Liu, D., and Xu, K., Heat Flux Correlation for Spray Cooling in the Nonboiling Regime, Heat Transfer Engineering, vol. 32, no. 11–12, pp. 1075–1081, 2011.
   Web of Science ®Google Scholar
• Xie, N., Hu, X., and Tang, D., Visualization of Microbubble Dynamics Behavior in Rectangular Capillary Microgrooves Under Spray Cooling Condition, Heat Transfer Engineering, vol. 32, no. 11–12, pp. 1019–1025, 2011.
   Web of Science ®Google Scholar
• Fabris, D., Escobar-Vargas, S., Gonzalez, J.E., Sharma, R., and Bash, C., Monodisperse Spray Cooling of Small Surface Areas at High Heat Flux, Heat Transfer Engineering, vol. 33, no. 14, pp. 1161–1169, 2012.
   Web of Science ®Google Scholar
• Pereira, R.H., Bandarra Filho, E.P., Braga, S.L., and Parise, J.A. R., Nucleate Boiling in Large Arrays of Impinging Water Sprays, Heat Transfer Engineering, vol. 34, no. 5–6, pp. 479–491, 2013.
   Web of Science ®Google Scholar
• Yan, Z.B., Toh, K.C., Duan, F., Wong, T.N., Choo, K.F., Chan, P.K., and Chua, Y.S., Experimental Study of Impingement Spray Cooling for High Power Devices, Applied Thermal Engineering, vol. 30, no. 10, pp. 1225–1230, 2010.
   Web of Science ®Google Scholar
• Chunqiang, S., Shuangquan, S., Changqing, T., and Hongbo, X., Development and Experimental Investigation of a Novel Spray Cooling System Integrated in Refrigeration Circuit, Applied Thermal Engineering, vol. 33–34, pp. 246–252, 2012.
   Web of Science ®Google Scholar
• Sung, M.K., and Mudawar, I., CHF Determination for High-Heat Flux Phase Change Cooling System Incorporating Both Micro-Channel Flow and Jet Impingement, International Journal of Heat and Mass Transfer, vol. 52, no. 3–4, pp. 610–619, 2009.
   Web of Science ®Google Scholar
• Joshi, S.N., Rau, M.J., and Dede, E.M., An Experimental Study of a Single-Device Jet Impingement Cooler with Phase Change Using HFE-7100 and a Vapor Extraction Manifold, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition (IMECE2013), San Diego, CA, pp. 1–10, 2013.
   Google Scholar
• Joshi, S.N., Rau, M.J., Dede, E.M., and Garimella, S.V., An Experimental Study of a Multi-Device Jet Impingement Cooler with Phase Change Using HFE-7100, Proceedings of the ASME 2013 Heat Transfer Summer Conference (HT2013), Minneapolis, MN, pp. 1–9, 2013.
   Google Scholar
• Ribeiro, G.B., Development of a High Ambient Temperature Cooling Unit for Based on Microcompressor Technology, Proceedings of the International Refrigeration and Air Conditioning Conference at Purdue, Paper 1255, July 16–19, 2012.
   Google Scholar
• Morriesen, A., Resende, F.E., Ramos, L.W. S. L., Couto, P.R. C., and Ribeiro, G.B., Personal Cooling System Based on Vapor Compression Cycle for Stock Car Racing Drivers, Proceedings of the International Refrigeration and Air Conditioning Conference at Purdue, Paper 1239, July 16–19, 2012.
   Google Scholar
• Takemori, C.K., and Fagotti, F., Numerical Evaluation of Performance Curves of a High Frequency Microcompressor, Proceedings of the International Compressor Engineering Conference at Purdue, Paper 2131, July 16–19, 2012.
   Google Scholar
• Ghiaasiaan, S.M., Two-Phase Flow, Boiling, and Condensation in Conventional and Miniature Systems, Cambridge University Press, New York, NY, 2008.
   Google Scholar
• Hermes, C.J. L., Melo, C., and Knabben, F.T., Algebraic Solution of Capillary Tube Flows: Part I: Adiabatic Capillary Tubes, Applied Thermal Engineering, vol. 30, pp. 449–457, 2010.
   Web of Science ®Google Scholar
• Awad, M.M., and Muzychka, Y.S., Effective Property Models for Homogeneous Two-Phase Flows, Experimental Thermal and Fluid Science, vol. 33, no. 1, pp. 106–113, 2008.
   Web of Science ®Google Scholar
• Hsieh, S.-S., Fan, T.-C., and Tsai, H.-H., Spray Cooling Characteristics of Water and R-134a, Part I: Nucleate Boiling, International Journal of Heat and Mass Transfer, vol. 47, no. 6, pp. 5703–5712, 2004.
   Web of Science ®Google Scholar
• Rybicki, J.R., and Mudawar, I., Single-Phase and Two-Phase Cooling Characteristics of Upward-Facing and Downward-Facing Sprays, International Journal of Heat and Mass Transfer, vol. 49, no. 1–2, pp. 5–16, 2006.
   Web of Science ®Google Scholar
• Chien, L.-H., Wu, T.-L., and Lee, S.-C., A Study of Spray-Impingement Cooling on Smooth and Pin-Finned Surfaces Using FC-72, Journal of Enhanced Heat Transfer, vol. 18, no. 5, pp. 375–387, 2011.
   Web of Science ®Google Scholar
• Tan, Y.B., Xie, J.L., Duan, F., Wong, T.N., Toh, K.C., Choo, K.F., Chan, P.K., and Chua, Y.S., Multi-nozzle Spray Cooling for High Heat Flux Applications in a Closed Loop System, Applied Thermal Engineering, vol. 54, no. 2, pp. 372–379, 2013.
   Web of Science ®Google Scholar
• Estes, K.A., and Mudawar, I., Correlation of Sauter Mean Diameter and Critical Heat Flux for Spray Cooling of Small Surfaces, International Journal of Heat and Mass Transfer, vol. 38, no. 16, pp. 2985–2996, 1995.
   Web of Science ®Google Scholar
• Mudawar, I., and Estes, K.A., Optimizing and Predicting CHF in Spray Cooling of a Square Surface, Journal of Heat Transfer, vol. 118, no. 3, pp. 672–678, 1996.
   Web of Science ®Google Scholar
• Chien, L.-H., and Chang, C.-Y., An Experimental Study of Two-Phase Multiple Jet Cooling on Finned Surfaces Using a Dielectric Fluid, Applied Thermal Engineering, vol. 31, no. 11–12, pp. 1983–1993, 2011.
   Web of Science ®Google Scholar
• Şeşen, M., Demir, E., Izci, T., Khudhayer, W., Karabacak, T., and Koşar, A., Submerged Jet Impingement Cooling using Nanostructured Plates, International Journal of Heat and Mass Transfer, vol. 59, pp. 414–422, 2013.
   Web of Science ®Google Scholar
• Lee, H.S., Thermal Design: Heat Sinks, Thermoelectrics, Heat Pipes, Compact Heat Exchangers, and Solar Cells, Wiley, Hoboken, NJ, 2010.
   Google Scholar
• Shah, R.K., and Sekulić, D.P., Fundamentals of Heat Exchanger Design, John Wiley & Sons, Hoboken, NJ, 2003.
   Google Scholar
• Press, W.H., Flannery, B.P., Teukolsky, S.A., and Vetterling, W.T., Numerical Recipes: The Art of Scientific Computing (FORTRAN Version), Cambridge University Press, New York, NY, 1989.
   Google Scholar
• Ferziger, J.H., and Perić, M., Computational Methods for Fluid Dynamics, 3rd ed., Springer, Berlin, 2002.
   Google Scholar
• Lemmon, E.W., Huber, M.L., and McLinden, M.O., NIST Reference Fluid Thermodynamic and Transport Properties—REFPROP, Version 8.0, National Institute of Standards and Technology, Boulder, CO, 2007
   Google Scholar
• Prasher, R., and Chiu, C.-P., Materials for Advanced Packaging, Springer Science+Business Media, New York, NY, 2009.
   Google Scholar
• Ulson de Souza, A.G., and Barbosa, J.R. , Jr., Spray Cooling of Plain and Copper-Foam Enhanced Surfaces, Experimental Thermal and Fluid Science, vol. 39, pp. 198–206, 2012.
   Web of Science ®Google Scholar
• Ulson de Souza, A.G., and Barbosa, J.R. , Jr., Experimental Evaluation of Spray Cooling of R-134a on Plain and Enhanced Surfaces, International Journal of Refrigeration, vol. 36, no. 2, pp. 527–533, 2013.
   Web of Science ®Google Scholar
• Gosney, W.B., Principles of Refrigeration, Cambridge University Press, Cambridge, UK, 1982.
   Google Scholar
• Hou, Y., Liu, X., Liu, J., Li, M., and Pu, L., Experimental Study on Phase Change Spray Cooling, Experimental Thermal and Fluid Science, vol. 46, pp. 84–88, 2013.
   Web of Science ®Google Scholar
• Park, W.H., and Yang, C.-K. K., Effects of Using Advanced Cooling Systems on the Overall Power Consumption of Processors, IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 21, no. 9, pp. 1644–1654, 2013.
   Web of Science ®Google Scholar
• Sathe, A., Groll, E., and Garimella, S., Experimental Evaluation of a Miniature Rotary Compressor for Application in Electronics Cooling, Proceedings of the International Compressor Engineering Conference at Purdue, Paper 1929, July 14–17, 2008.
   Google Scholar