Heat Transfer Design Methodology Treating a Heat Exchange Device and Its Fluid-Mover Partner as a Single System

References

• Hui, Z., and Xin, Y., Design and Simulation of the CPU Fan and Heat Sinks, IEEE Transactions on Components and Packaging Technologies, vol. 31, no. 4, pp. 890–903, 2008.
   Google Scholar
• Wei, X., Campbell, L., Cruz, E., and Kelly, P., Modeling Blower Flow Characteristics and Comparing to Measurements, IEEE 30th Annual Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM), pp. 224–229, 2014.
   Google Scholar
• Fukue, T., Koizumi, K., Ishizuka, M., and Nakagawa, S., Effects of Electronic Enclosure and Inlet Area on P-Q Curves of Installed Axial Cooling Fans, Journal of Environment and Engineering, vol. 6, no. 3, pp. 650–664, 2011.
   Google Scholar
• Fukue, T., Ishizuka, M., Hatakeyama, T., Nakagawa, S., and Koizumi, K., Study on PQ Curves of Cooling Fans for Thermal Design of Electronic Equipment (Effects of Opening Position of Obstructions Near a Fan), ASME–JSME–KSME 2011 Joint Fluids Engineering Conference, pp. 737–745, 2011.
   Google Scholar
• Lin, S. C., and Chou, C. A., Blockage effect of axial-flow fans applied on heat sink assembly, Applied Thermal Engineering, vol. 24, no. 16, pp. 2375–2389, 2004.
   Web of Science ®Google Scholar
• Park, K., Choi, D. H., and Lee, K. S., Numerical Shape Optimization For High Performance of a Heat Sink With Pin-Fins, Numerical Heat Transfer, Part A: Applications, vol. 46, no. 9, pp. 909–927, 2004.
   Web of Science ®Google Scholar
• Agonafer, D., and Free, A., Conjugate Model of a Pin-Fin Heat Sink Using a Hybrid Conductance and CFD Model Within an Integrated MCAE Tool, Thermal Management of Electronic Systems II, Springer, Dordrecht, The Netherlands, pp. 53–62, 1997.
   Google Scholar
• Sanyal, A., Srinivasan, K., and Dutta, P., Numerical Study of Heat Transfer From Pin-Fin Heat Sink Using Steady and Pulsated Impinging Jets, IEEE Transactions on Components and Packaging Technologies, vol. 32, no. 4, pp. 859–867, 2009.
   Google Scholar
• Ledezma, G., Morega, A. M., and Bejan, A., Optimal Spacing Between Pin Fins With Impinging Flow, ASME Journal of Heat Transfer, vol. 118, no. 3, pp. 570–577, 1996.
   Web of Science ®Google Scholar
• Sathe, S., Kelkar, K. M., Karki, K. C., Tai, C., Lamb, C., and Patankar, S. V., Numerical Prediction of Flow and Heat Transfer in an Impingement Heat Sink, Journal of Electronic Packaging, vol. 119, no. 1, pp. 58–63, 1997.
   Web of Science ®Google Scholar
• Wirtz, R. A., Sohal, R., and Wang, H., Thermal Performance of Pin-Fin Fan-Sink Assemblies, Journal of Electronic Packaging, vol. 119, no. 1, pp. 26–31, 1997.
   Web of Science ®Google Scholar
• Zheng, N., and Wirtz, R. A., Cylindrical Pin-Fin, Fan-Sink Heat Transfer and Pressure Drop Correlations, IEEE Transactions on Components and Packaging Technologies, vol. 25, no. 1, pp. 15–22, 2002.
   Google Scholar
• El-Sayed, S. A., Mohamed, S. M., Abdel-latif, A. A., and Abdel-hamid, E. A., Experimental Study of Heat Transfer and Fluid Flow in Longitudinal Rectangular-Fin Array Located in Different Orientations in Fluid Flow, Experimental Thermal and Fluid Science, vol. 29, no. 1, pp. 113–128, 2004.
   Web of Science ®Google Scholar
• Sparrow, E. M., and Larson, E. D., Heat Transfer From Pin-Fins Situated in an Oncoming Longitudinal Flow Which Turns to Crossflow, International Journal of Heat and Mass Transfer, vol. 25, no. 5, pp. 603–614, 1982.
   Web of Science ®Google Scholar
• El-Sheikh, H. A., and Gurimella, S. V., Enhancement of Air Jet Impingement Heat Transfer Using Pin-Fin Heat Sinks, IEEE Transactions on Components and Packaging Technologies, vol. 23, no. 2, pp. 300–308, 2000.
   Google Scholar
• Menter, F., Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications, AIAA Journal, vol. 32, pp. 1598–1605, 1994.
   Web of Science ®Google Scholar
• Sparrow, E. M., Gorman, J. M., and Abraham, J. P., Quantitative Assessment of the Overall Heat Transfer Coefficient U, ASME Journal of Heat Transfer, vol. 135, no. 6, pp. 061102, 2013.
   Web of Science ®Google Scholar
• Bayazit, Y., Sparrow, E. M., and Joseph, D. D., Perforated Plates for Fluid Management: Plate Geometry Effects and Flow Regimes, International Journal of Thermal Sciences, vol. 85, pp. 104–111, 2014.
   Web of Science ®Google Scholar
• Li, A., Chen, X., and Chen, L., Numerical Investigations on Effects of Seven Drag Reduction Components in Elbow and T-Junction Close-Coupled Pipes, Building Services Engineering Research and Technology, vol. 36, pp. 295–310, 2014.
   Web of Science ®Google Scholar
• Engdar, U., and Klingmann, J., Investigation of Two-Equation Turbulence Models Applied to a Confined Axis-Symmetric Swirling Flow, ASME 2002 Pressure Vessels and Piping Conference, pp. 199–206, 2002.
   Google Scholar
• Clausen, P. D., Koh, S. G., and Wood, D. H., Measurements of a Swirling Turbulent Boundary Layer Developing in a Conical Diffuser, Experimental Thermal and Fluid Science, vol. 6, pp. 39–48, 1993.
   Web of Science ®Google Scholar
• Sparrow, E. M., Tong, J. C. K., and Abraham, J. P., Fluid Flow in a System With Separate Laminar and Turbulent Zones, Numerical Heat Transfer, Part A: Applications, vol. 53, pp. 341–353, 2008.
   Web of Science ®Google Scholar
• Churchill, S. W., A Reinterpretation of the Turbulent Prandtl Number, Industrial & Engineering Chemistry Research, vol. 41, pp. 6393–6401, 2002.
   Web of Science ®Google Scholar
• Kays, W. M., Turbulent Prandtl Number—Where Are We?, ASME Journal of Heat Transfer, vol. 116, no. 2, pp. 284–295, 1994.
   Web of Science ®Google Scholar
• Dogruoz, M. B., and Shankaran, G., Advances in Fan Modeling: Issues and Effects on Thermal Design of Electronics, ASME 2012 International Mechanical Engineering Congress and Exposition, pp. 1515–1522, 2012.
   Google Scholar