Introducing Film Cooling Uniformity Coefficient

References

• Eckert, E. R. G. and Livingood, J. N. B., Comparison of Effectiveness of Convection, Transpiration, and Film-Cooling Methods with Air as Coolant, NASA-Report-1182, 1954.
   Google Scholar
• Goldstein, R. J., Film Cooling, Advances in Heat Transfer, vol. 7, pp. 321–379, 1971.
   Google Scholar
• Margason, R. J., Fifty Sources of Jet in Cross Flow Research, in Proceedings of the AGARD Symposium on Computational and Experimental Assessment of Jets in Cross Flow, Winchester, UK, April 1993, AGARD-CP-534.
   Google Scholar
• Garg, K. and Gaugler, R. E., Leading Edge Film Cooling Effects on Turbine Blade Heat Transfer, Numerical Heat Transfer, Part A, vol. 30, no. 2, pp. 165–187, 1996.
   Web of Science ®Google Scholar
• Bogard, D. G. and Thole, K. A., Gas Turbine Film Cooling, Journal of Propulsion and Power, vol. 22, no. 2, pp. 249–269, 2006.
   Web of Science ®Google Scholar
• Javadi, Kh., Taeibi-Rahni, M., and Darbandi, M., Jet-into-Crossflow Boundary-Layer Control: Innovation in Gas Turbine Blade Cooling, AIAA Journal, vol. 45, no. 12, pp. 2910–2925, 2007.
   Web of Science ®Google Scholar
• Haven, B. A. and Kurosaka, M., Kidney and Anti-Kidney Vortices in Crossflow Jets, Journal of Fluid Mechanics, vol. 352, pp. 27–64, 1997.
   Web of Science ®Google Scholar
• Bell, C. M., Hamakawa, H., and Ligrani, P. M., Film Cooling From Shaped Holes, ASME Journal of Heat Transfer, vol. 122, no. 2, pp. 224–232, 2000.
   Web of Science ®Google Scholar
• Gartshore, I., Salcudean, M., and Hassan, I., Film Cooling Injection Hole geometry: Hole Shape Comparison for Compound Cooling Orientation, AIAA Journal, vol. 39, no. 8, pp. 1493–1499, 2001.
   Web of Science ®Google Scholar
• Jovanovic, M. B., de Lange, H. C., and van Steenhoven, A. A., Influence of Hole Imperfection on Jet Cross Flow Interaction, International Journal of Heat and Fluid Flow, vol. 27, pp. 42–53, 2006.
   Web of Science ®Google Scholar
• Reddy, D. R. and Zaman, K. B. M. Q., Computational Study of Effect of Tabs on a Jet in a Cross Flow, Computers & Fluids, vol. 35, pp. 712–723, 2006.
   Web of Science ®Google Scholar
• Mahjoob, Sh. and Taeibi-Rahni, M., Parameter Affecting Turbulent Film Cooling, Reynolds-Averaged Navier-Stokes Computational Simulation, AIAA Journal of Thermophysics and Heat Transfer, vol. 20, no. 1, pp. 92–100, 2006.
   Web of Science ®Google Scholar
• Yiping, L., Allison, D., and Ekkad, S. V., Turbine Blade Showerhead Film Cooling: Influence of Hole Angle and Shaping, International Journal of Heat and Fluid Flow, vol. 28, no. 5, pp. 922–931, 2007.
   Web of Science ®Google Scholar
• Ghorab, M. G., Film Cooling Effectiveness and Heat Transfer Analysis of a Hybrid Scheme with Different Outlet Configurations, Applied Thermal Engineering, vol. 63, pp. 200–217, 2014.
   Web of Science ®Google Scholar
• Yang, C. F. and Zhang, J. Z., Experimental Investigation on Film Cooling Characteristics From a Row of Holes with Ridge-Shaped Tabs, Experimental Thermal and Fluid Science, vol. 37, pp. 113–120, 2012.
   Web of Science ®Google Scholar
• Nadali Najafabadi, H., Karlsson, M., Kinell, M., and Utriainen, E., Film-Cooling Performance of a Turbine Vane Suction Side: The Showerhead Effect on Film-Cooling Hole Placement for Cylindrical and Fan-Shaped Holes, Journal of Turbomachinery, vol. 137, pp. 091005–1, 2015.
   Web of Science ®Google Scholar
• Ana, B. T., Liua, J. J., Zhanga, X. D., Zhoua, S. J., and Zhang, C., Film Cooling Effectiveness Measurements of a Near Surface Streamwise Diffusion Hole, International Journal of Heat and Mass Transfer, vol. 103, pp. 1–13, 2016.
   Web of Science ®Google Scholar
• Zhou, W. and Hu, H., Improvements of film Cooling Effectiveness by Using Barchan Dune Shaped Ramps, International Journal of Heat and Mass Transfer, vol. 103, pp. 443–4359, 2016.
   Web of Science ®Google Scholar
• Wagner, G., Schneider, E., Von Wolfersdorf, J., Ott, P., and Weigand, B., Method for Analysis of Showerhead Film Cooling Experiments on Highly Curved Surfaces, Experimental Thermal and Fluid Science, vol. 31, no. 4, pp. 381–389, 2007.
   Web of Science ®Google Scholar
• Kohli, A. and Bogard, D., Adiabatic Effectiveness. Thermal Fields and Velocity Fields for Film Cooling with Large Angle Injection, Journal of Turbomachinery, vol. 119, pp. 352–358, 1997.
   Web of Science ®Google Scholar
• Kadotani, K. and Goldstein, R. J., Effect of MainstreamVariables on Jets Issuing from a Row of Inclined Round Holes, Journal of Engineering for Power, vol. 101, pp. 289–304, 1979.
   Google Scholar
• Bridges, A. and Smith, D. R., Influence of Orifice Orientation on a Synthetic Jet-boundary-layer Interaction, AIAA Journal, vol. 41, no. 12, pp. 2349–2402, 2003.
   Web of Science ®Google Scholar
• Azzi, A., Abidat, M., Jubran, B. A., and Theodoridis, G. S., Film Cooling Predictions of Simple and Compound Angle Injection from One and Two Staggered Rows, Numerical Heat Transfer, Part A., vol. 40, no. 3, pp. 273–294, 2001.
   Web of Science ®Google Scholar
• Jubran, B. A. and Maiteh, B. Y., Film Cooling and Heat Transfer from a Combination of Two Rows of Simple and/or Compound Angle Holes in Inline and/or Staggered Configurations, Journal of Heat and Mass Transfer, vol. 34, no. 6, pp. 495–502, 1999.
   Google Scholar
• Yuen, C. H. N. and Botas, M., Film Cooling Charateristics of a Single Round Hole at Various Streamwise Angles in a Crossflow: Part I Effectiveness, International Journal of Heat and Mass Transfer, vol. 46, pp. 221–235, 2003.
   Web of Science ®Google Scholar
• Burd, S. W., Kaszeta, R. W., and Simon, T. W., Measurements in Film Cooling Flows: Hole L/D and Turbulence Intensity, ASME Journal of Turbumachinary, vol. 120, no. 4, pp. 791–798, 1998.
   Web of Science ®Google Scholar
• Plesniak, M. W., Noncanonical Short Hole Jet-in-Crossflow for Turbine Film Cooling, Journal of Applied Mechanics, vol. 73, pp. 747–482, 2006.
   Web of Science ®Google Scholar
• Jubran, B. A. and Maiteh, B. Y., Film Cooling and Heat Transfer from a Combination of Two Rows of Simple and/or Compound Angle Holes in Inline and/or Staggered Configurations, Journal of Heat and Mass Transfer, vol. 34, no. 6, pp. 495–502, 1999.
   Google Scholar
• Ligrani, P. M., Wigle, J. M., Ciriello, S., and Jackson, S. M., Film-Cooling From Holes with Compound Angle Orientations: Part 1-Results Downstream of Two Staggered Rows of Holes with 3d Spanwise Spacing, ASME Journal of Heat Transfer, vol. 116, no. 2, pp. 341–352, 1994.
   Web of Science ®Google Scholar
• Ligrani, P. M. and Lee, J. S., Film Cooling from Two Staggered Rows of Compound Angle Holes at High Blowing Ratio, International Journal of Rotating Machinery, vol. 2, pp. 201–208, 1996.
   Google Scholar
• Li, X., Ren, J., and Jiang, H., Influence of Different film Cooling Arrangements on End Wall Cooling, International Journal of Heat and Mass Transfer, vol. 102, pp. 349–359, 2016
   Web of Science ®Google Scholar
• Miao, J. M. and Ching, H. K., Numerical Simulation of Film-Cooling Concave Plate as Coolant Jet Passes Through Two Rows of Holes With Various Orientations of Coolant Flow, International Journal of Heat and Mass Transfer, vol. 49, no. 3–4, pp. 557–574, 2006.
   Web of Science ®Google Scholar
• Ekkad, S. V., Gao, L., and Hebert, R. T., Effect of Jet-to-Jet Spacing in Impingement Arrays on Heat Transfer, ASME -IMECE2002–32108, pp. 237–244 New Orleans, Louisiana, USA, November 17–22, 2002.
   Google Scholar
• Saumweber, C., Interaction of Film cooling Rows: Effects of Hole Geometry and Row Spacing on the Cooling performance Downstream of the Second Row of Holes, ASME Journal of Turbomachinery, vol. 126, no. 2, pp. 237–246, 2004.
   Web of Science ®Google Scholar
• Petre, B., Dorignac, E., and Vullierme, J. J., Study of the Influence of the Number of Holes Rows on the Convective Heat Transfer in the Case of Full Coverage Film Cooling, International Journal of Heat and Mass Transfer, vol. 46, no. 18, pp. 3477–3496, 2003.
   Web of Science ®Google Scholar
• Goldstein, R. J. and Stone, L. D., Row-of-Holes Film Cooling of Curved Walls at Low Injection Angles, Transactions of ASME, vol. 119, no. 3, pp. 574–579, 1997.
   Google Scholar
• Sinha, A. K., Bogard, D. G., and Crawford, M. E., Film Cooling Effectiveness Downstream of a Single Row Of Holes With Variable Density Ratio, ASME, Int. Gas Turbine and Aeroengine Congress and Exposition, 35th, Brussels, Belgium, June 11–14, 1990.
   Google Scholar
• Goldstein, R. J., Eckert, E. R. G., and Burggraf, F., Effects of Hole Geometry and Density on Three-Dimensional Film Cooling, International Journal of Heat and Mass Transfer, vol. 17, pp. 595–607, 1974.
   Web of Science ®Google Scholar
• Hass, W., Rodi, W., and Schonung, B., The Influence of Density Difference Between Hot and Coolant Gas on Film Cooling by a Row of Holes: Prediction and Experiments, ASME Journal of Turbomachinery, vol. 114, pp. 747–755, 1992.
   Web of Science ®Google Scholar
• Ajersch, P., Zhou, J. M., Ketler, S., Salcudean, M., and Gartshore, I. S., Multiple Jets in a Crossflow: Detailed Measurements and Numerical Simulations, Journal of Turbomachinery, vol. 119, no. 2, pp. 330–342, 1997.
   Web of Science ®Google Scholar
• McGrath, L. E. and Leylek, J. H., Physics of Hot Crossflow Ingestion in Film Cooling, Journal of Turbomachiney, vol. 121, no. 3, pp. 532–541, 1999.
   Web of Science ®Google Scholar
• Rowbury, D. A., Oldfield, M. L. G., and Lock, G. D., A Method for Correlating the Influence of External Crossflow on the Discharge Coefficient of Film Cooling Holes, Journal of Turbomachinery, vol. 123, no. 2, pp. 258–265, 2001.
   Web of Science ®Google Scholar
• Burd, S. W., Kaszeta, R. W., and Simon, T. W., Measurements in Film Cooling Flows: Hole L/D and Turbulence intensity, ASME Journal of Turbumachinary, vol. 120, no. 4, pp. 791–798, 1998.
   Web of Science ®Google Scholar
• Mehendale, A. and Han, J. C., Influence of Mainstream Turbulence on Leading Edge Film Cooling Heat Transfer, ASME Journal of Turbomachinery, vol. 114, no. 10, pp. 705–715, 1992.
   Google Scholar
• Kohli, A. and Bogard, D., Effects of Very High Free-Stream Turbulence on the Jet-Mainstream Interaction in a Film Cooling Flow, ASME Journal of Turbomachinery, vol. 120, no. 4, pp. 785–790, 1998.
   Web of Science ®Google Scholar
• Jenkins, S., Varadarajan, K., and Bogard, D. G., The Effects of High Mainstream Turbulence and Turbine Vane Film Cooling on the Dispersion of a Simulated Hot Streak, ASME Journal of Turbomachinery, vol. 126, no. 1, pp. 203–211, 2004.
   Web of Science ®Google Scholar
• Kadotani, K. and Goldstein, R. J., Effect of Mainstream Variables on Jets Issuing from a Row of Inclined Round Holes, ASME Journal of Engineering for Power, vol. 101, pp. 298–304, 1979.
   Google Scholar
• Gomes, R. A. and Niehuis, R., Film Cooling on Highly Loaded Blades with Main Flow Separation—Part II: Overall Film Cooling Effectiveness, Journal of Turbomachinery, vol. 135, pp. 011044–1, 2013.
   Web of Science ®Google Scholar
• Aupoix, B., Mignosi, A., Viala, S., Boivier, F., and Gaillard, R., Experimental and Numerical Study of Supersonic Film Cooling, AIAA Journal, vol. 36, no. 6, pp. 915–923, 1998.
   Web of Science ®Google Scholar
• Ligrani, P. M., Saumweber, C., Schulz, A., and Wittig, S., Shock Wave–Film Cooling Interactions in Transonic Flows, ASME Journal of Turbomachinery, vol. 123, no. 4, pp. 788–797, 2001.
   Web of Science ®Google Scholar
• Ricklick, M., Claretti, R., and Kapat, J. S., Channel Height and Jet Spacing Effect on Heat Transfer and Uniformity Coefficient on an Inline Row Impingement Channel ASME Turbo Expo 2010: Power for Land, Sea, and Air, Volume 4: Heat Transfer, Parts A and B, Glasgow, UK, June 14–18, 2010.
   Google Scholar
• Gowreesh, V. K., Pravin, K. Rajagopal, and Veena, P. H., Thermal stresses investigation of a gas turbine blade Melaka, Malaysia, 3–4 October 2011, AIP Conf. Proc., vol. 1440, pp. 374–384, 2012.
   Google Scholar
• Pepe, D. M. and Ittleson, A. J., Laser Drill Hole for Film Cooling, U.S. Patent No. 6,744,010 B1, 2004.
   Google Scholar
• Zuniga, H. A., Study of Discharged Coefficient and Trends in Film Cooling Effectiveness of Conical Holes with Increasing Diffusion Angles, M.S. thesis, University of Central Florida Orlando, Florida, 2006.
   Google Scholar
• Cuong, Q., Nguyen, Perry, L. J., Bryan, C. B., Son, H. Ho, and Kapat, J. S., Comparison of Film Effectiveness and Cooling Uniformity of Conical and Cylindrical-Shaped Film Hole With Coolant-Exit Temperature Correction, Journal of Thermal Science and Engineering Applications, vol. 3, no. 3, 2011.
   Google Scholar
• Patil, A. A. and Shirsat, U. M., Study of Failure Analysis of Gas Turbine Blade, IOSR Journal of Engineering (IOSRJEN) ISSN: 2250–3021 ISBN: 2878–8719, pp. 37–43.
   Google Scholar
• Liaqat, A., Khalid, M. G., and Faizul, H., Cracking Failure in GAS-Turbine Blades, Pakistan Journal of Engineering & Applied Sciences, vol. 9, pp. 98–102, 2011.
   Google Scholar
• Sciubba, E., Air-Cooled Gas Turbine Cycles E Part 1: An analytical Method for the Preliminary Assessment of Blade Cooling Flow Rates, Energy, vol. 83, pp. 104–114, 2015.
   Web of Science ®Google Scholar
• Launder, B. E. and Shima, N., Second-Moment Closure for the Near-Wall Sublayer: Development and Application, AIAA Journal, vol. 27, no. 10, pp. 1319–1325, 1989.
   Web of Science ®Google Scholar
• Daly, B. J. and Harlow, F. H., Transport Equations of Turbulence, Physics of Fluids, vol. 13, pp. 2634–2649, 1970.
   Web of Science ®Google Scholar
• Hanjalic, K. and Launder, B. E., A Reynolds Stress Model of Turbulence and its Application to Thin Shear Layers, Journal of Fluid Mechanics, vol. 52, no. 4, pp. 609–638, 1972.
   Google Scholar
• Launder, B. E., Reece, G. J., and Rodi, W., Progress in the Development of a Reynolds-Stress Turbulence Closure, Journal of Fluid Mechanics, vol. 68, no. 3, pp. 537–566, 1975.
   Google Scholar
• Gibson, M. M. and Launder, B. E., Ground Effects on Pressure Fluctuations in the Atmospheric Boundary Layer, Journal of Fluid Mechanics, vol. 86, pp. 491–511, 1978.
   Web of Science ®Google Scholar
• Lumley, J. L. and Khajeh-Nouri, B. J., Computational Modeling of Turbulent Transport, Advances in Geophysics, vol. 18A, pp. 169–192, 1974.
   Google Scholar
• Fu, S., Launder, B. E., and Leschziner, M. A., Modeling Strongly Swirling Recirculating Jet Flow with Reynolds Stress Transport Closures, Symposium on Turbulent Shear Flows, 6th, Toulouse, France, Sept. 7–9, 1987.
   Google Scholar
• Hwang, R. R. and Jaw, S. Y., Second-Order Closure Turbulence Models: Their Achievements and Limitations, Proc. National Science Council, Republic China, vol. 22, no. 6, pp. 703–722, 1998.
   Google Scholar
• Menter, F. R., Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications, AIAA Journal, vol. 32, no. 8, pp. 1598–1605, 1994.
   Web of Science ®Google Scholar
• Feric, T. F. and Roshko, A., Vortical Structure in the Wake of a Transverse Jet, Journal of Fluid Mechanics, vol. 279, pp. 1–47, 1994.
   Web of Science ®Google Scholar
• Haven, B. A. and Kurosaka, M., Kidney and Anti-kidney Vortices in Crossflow Jets, Journal of Fluid Mechanics, vol. 352, pp. 27–64, 1997.
   Web of Science ®Google Scholar
• Smith, S. H. and Mungal, M. G., Mixing Structure and Scaling of the Jet in Crossflow, Journal of Fluid Mechanics, vol. 357, pp. 83–122, 1998.
   Web of Science ®Google Scholar
• Javadi, Kh, Taeibi-Rahni, M., and Darbandi, M., Evaluation of RANS Approach in Predicting the Physics of Incompressible Jet-into-Crossflows, paper No. IMECE2007–41114, November 11–15, Seattle, Washington USA, 2007.
   Google Scholar