Investigation of Combined Transpiration and Opposing Jet Cooling of Sintered Metal Porous Struts

References

• Peebles, C., Road to Mach 10: Lessons Learned from the X-43A Flight Research Program, AIAA, Reston, VA, pp. 273–274, 2008.
   Google Scholar
• Wright-Patterson Air Force Base, X-51 Waverider makes historic hypersonic flight,26 May 2010. [Online]. URL: http://www.wpafb.af.mil/new/story.asp?id=123206524.
   Google Scholar
• Gerlinger, P., Stoll, P., Kindler, M., Schneider, F., and Aigner, M., Numerical Investigation of Mixing and Combustion Enhancement in Supersonic Combustors by Strut Induced Streamwise Vorticity, Aerospace Science and Technology, vol. 12, no. 2, pp. 159–168, 2008.
   Web of Science ®Google Scholar
• Glawe, D. D., Saminy, M., Nejad, A. S., and Cheng, T. H., Effects of Nozzle Geometry on Parallel Injection from Base of an Extended Strut into a Supersonic Flow, AIAA Paper, pp. 95–0522, 1995.
   Google Scholar
• Tomioka, S., Kanda, T., Tani, K., Mitani, T., Shimura, T., and Chinzei, N., Testing of a Scramjet Engine with a Strut at M8 Flight Condition, AIAA Paper, pp. 98–3134, 1998.
   Google Scholar
• Tani, K., Kanda, T., and Kudo, K., Aerodynamic Performance of Scramjet Inlet Models with a Single Strut, Journal of Propulsion and Power, vol. 22, no. 4, pp. 905–912, 2006.
   Web of Science ®Google Scholar
• Ogawa, H., and Kodera, M., Physical Insight into Fuel/Air Mixing with Hypermixer Injectors for Scramjet Engines, Journal of Propulsion and Power, vol. 31, no. 5, pp. 1423–1435, 2015.
   Web of Science ®Google Scholar
• Pandey, K. M., Roga, S., and Choubey, G., Computational Analysis of Hypersonic Combustor Using Strut Injector at Flight Mach 7, Combustion Science and Technology, vol. 187, pp. 1392–1407, 2015.
   Web of Science ®Google Scholar
• Masuya, G., Komuro, T., Murakami, A., Shinozaki, N., Nakamura, A., Murayamall, M., and Ohwaki, K., Ignition and Combustion Performance of Scramjet Combustors with Fuel Injection Struts, Journal of Propulsion and Power, vol. 11, no. 2, pp. 301–307, 1995.
   Web of Science ®Google Scholar
• Desikan, S., and Job, K., Mixing Studies in Supersonic Flow Employing Strut Based Hypermixers, AIAA Paper, pp. 2005–3643, 2005.
   Google Scholar
• Tam, C., Hsu, K., Gruber, M., and Raffoul, C., Aerodynamic Performance of an Injector Strut for a Round Scramjet Combustor, AIAA Paper, pp. 2007–5403, 2007.
   Google Scholar
• Povinelli, L. A., Aerodynamic Drag and Fuel Spreading Measurements in a Simulated Scramjet Combustion Module, NASA TN D-7674, 1974.
   Google Scholar
• Duursma, G., Sefiane, K., Dehaene, A., Harmand, S., and Wang, Y., Flow and Heat Transfer of Single-and Two-Phase Boiling of Nanofluids in Microchannels, Heat Transfer Engineering, vol. 36, no. 14–15, pp. 1252–1265, 2015.
   Web of Science ®Google Scholar
• Salimpour, M. R., Sharifhasan, M., and Shirani, E., Constructal Optimization of Microchannel Heat Sinks with Noncircular Cross Sections, Heat Transfer Engineering, vol. 34, no. 10, pp. 863–874, 2013.
   Web of Science ®Google Scholar
• Kim, S. J., Methods for thermal optimization of microchannel heat sinks, Heat Transfer Engineering, vol. 25, no. 1, pp. 37–49, 2004.
   Web of Science ®Google Scholar
• Peng, W., and Jiang, P. X., Experimental and numerical study of film cooling with internal coolant cross-flow effects, Experimental Heat Transfer, vol. 25, no. 4, pp. 282–300, 2012.
   Web of Science ®Google Scholar
• Islami, S. B., Tabrizi, S. A., Jubran, B. A., and Esmaeilzadeh, E., Influence of Trenched Shaped Holes on Turbine Blade Leading Edge Film Cooling, Heat Transfer Engineering, vol. 31, no. 10, pp. 889–906, 2010.
   Web of Science ®Google Scholar
• Ming, Li, H., and Hassan, I., The Effects of Counterrotating Vortex Pair Intensity on Film-Cooling Effectiveness, Heat Transfer Engineering, vol. 36, no. 16, pp. 1360–1370, 2015.
   Web of Science ®Google Scholar
• Çuhadaroğlu, B., and Turan, O., Numerical Study on Heat Transfer Between Turbulent Flow and Porous Rectangular Cylinders with Uniform Injection or Suction, Heat Transfer Engineering, vol. 33, no. 15, pp. 1232–1245, 2012.
   Web of Science ®Google Scholar
• Gulli, S., Maddalena, L., Brune, A., and Hosder, S., Integrated Analysis of Reusable Thermal Protection Systems Based on Variable-Transpiration Cooling, Journal of Spacecraft and Rockets, vol. 51, no. 2, pp. 412–423, 2014.
   Web of Science ®Google Scholar
• Al-Hadhrami, L. M., Study of Heat Transfer Distribution in a Channel with Inclined Target Surface Cooled by a Single Array of Staggered Impinging Jets, Heat Transfer Engineering, vol. 31, no. 3, pp. 234–242, 2010.
   Web of Science ®Google Scholar
• Kandlikar, S. G., and Bapat, A. V., Evaluation of Jet Impingement, Spray and Microchannel Chip Cooling Options for High Heat Flux Removal, Heat Transfer Engineering, vol. 28, no. 11, pp. 911–923, 2007.
   Web of Science ®Google Scholar
• Arik, M., Local Heat Transfer Coefficients of a High-Frequency Synthetic Jet During Impingement Cooling Over Flat Surfaces, Heat Transfer Engineering, vol. 29, no. 9, pp. 763–773, 2008.
   Web of Science ®Google Scholar
• Motoyama, N., Mihara, K., Miyajima, R., Watanuki, T., and Kubota, H., Thermal Protection and Drag Reduction with Use of Spike in Hypersonic Flow, AIAA Paper, 2001–1828, 2001.
   Google Scholar
• Chandrasekhar, C., Ramanujachari, V., and Reddy, K. K. T., Experimental Investigations of Hydrocarbon Fueled Scramjet Combustor by Employing High Temperature Materials for the Construction of Fuel Injection Struts, International Journal of Science and Technology, vol. 1, no. 12, pp. 671–678, 2012.
   Google Scholar
• Sun, B., and Zheng, L. M., Research of Scramjet Strut Thermal Environment and Thermal Protection Scheme, Journal of Aerospace Power, vol. 21, no. 2, pp. 336–341, 2006.
   Google Scholar
• Zhu, Y. H., Jiang, P. X., Sun, J. G., and Xiong, Y. B., Injector Head Transpiration Cooling Coupled with Combustion in H-2/O-2 Subscale Thrust Chamber, Journal of Thermophysics and Heat Transfer, vol. 27, no. 1, pp. 42–51, 2013.
   Web of Science ®Google Scholar
• Wang, J. H., Zhao, L. J., Wang, X., Ma, J., and Lin, J., An Experimental Investigation on Transpiration Cooling of Wedge Shaped Nose Cone with Liquid Coolant, International Journal of Heat and Mass Transfer, vol. 75, pp. 442–449, 2014.
   Web of Science ®Google Scholar
• Bouchez, M., Scramjet Thermal Management, RTO-AVT-VKI lecture series RTO-EN-AVT-185, 2010.
   Google Scholar
• Xiong, Y. B., Zhu, Y. H., and Jiang, P. X., Numerical Simulation of Transpiration Cooling for Sintered Metal Porous Strut of the Scramjet Combustion Chamber, Heat Transfer Engineering, vol. 35, no. 6–8, pp. 721–729, 2014.
   Web of Science ®Google Scholar
• Huang, Z., Zhu, Y. H., Jiang, P. X., and Xiong, Y. B., Investigation of a Porous Transpiration-Cooled Strut Injector, Journal of Propulsion and Power, vol. 31, no. 1, pp. 278–285, 2014.
   Web of Science ®Google Scholar
• Warren, C. H. E., An Experimental Investigation of the Effect of Ejecting a Coolant Gas at the Nose of a Bluff Body, Journal of Fluid Mechanics, vol. 8, no. 3, pp. 400–417, 1960.
   Web of Science ®Google Scholar
• Meyer, B., Nelson, H. F., and Riggins, D. W., Hypersonic Drag and Heat Transfer Reduction Using a Forward Facing Jet, Journal of Aircraft, vol. 38, no. 4, pp. 680–686, 2001.
   Web of Science ®Google Scholar
• Hayashi, K., Aso, S., and Tani, Y., Experimental Study on Thermal Protection System by Opposing Jet in Supersonic Flow, Journal of Spacecraft and Rockets, vol. 43, no. 1, pp. 233–235, 2006.
   Web of Science ®Google Scholar
• Tomioka, S., Kanda, T., Tani, K., Mitani, T., Shimura, T., and Chinzei, N., Testing of a Scramjet Engine with a Strut at M8 Flight Condition, AIAA Paper, pp. 98–3134, 1998.
   Google Scholar
• Boyce, R. R., Paull, A., Stalker, R. J., Wendt, M., Chinzei, N., and Miyajima, H., Comparison of Supersonic Combustion between Impulse and Vitiation-Heated Facilities, Journal of Propulsion and Power, vol. 16, no. 4, pp. 709–717, 2000.
   Web of Science ®Google Scholar
• Génin, F., and Menon, S., Simulation of Turbulent Mixing Behind a Strut Injector in Supersonic Flow, AIAA Journal, vol. 48, no. 3, pp. 526–539, 2010.
   Web of Science ®Google Scholar
• Oevermann, M., Numerical Investigation of Turbulent Hydrogen Combustion in a Scramjet Using Flamelet Modelling, Aerospace Science and Technology, vol. 4, pp. 463–480, 2000.
   Web of Science ®Google Scholar
• Zheng, Y., and Zou, J., Partially Resolved Numerical Simulation for Supersonic Turbulent Combustion, AIAA Paper, pp. 2006–8040, 2006.
   Google Scholar
• National Institute of Standards and Technology (NIST), Standard Reference Database No. 69, June 2005, NIST Chemistry WebBook: http://webbook.nist.gov/chemistry/.
   Google Scholar
• Ergun, S., and Orning, A. A., Fluid Flow through Randomly Packed Columns and Fluidized Beds, Industrial & Engineering Chemistry, vol. 41, no. 6, pp. 1179–1184, 1949.
   Web of Science ®Google Scholar
• Wang, J. H., and Wang, H. N., A Discussion of Transpiration Cooling Problems Through an Analytical Solution of Local Thermal Non-equilibrium Model, Journal of Heat Transfer, vol. 128, no. 10, pp. 1093–1098, 2006.
   Web of Science ®Google Scholar
• Huang, Z., Zhu, Y. H., Xiong, Y. B., and Jiang, P. X., Investigation of Transpiration Cooling for Sintered Metal Porous Struts in Supersonic Flow, Applied Thermal Engineering, vol. 70, no. 1, pp. 240–249, 2014.
   Web of Science ®Google Scholar
• Liu, Y. Q., Jiang, P. X., Jin, S. S., and Sun, J. G., Transpiration Cooling of A Nose Cone by Various Foreign Gases, International Journal of Heat and Mass Transfer, vol. 53, no. 23, pp. 5364–5372, 2010.
   Web of Science ®Google Scholar
• Jiang, P. X., Ren, Z. P., and Wang, B. X., Numerical Simulation of Forced Convection Heat Transfer in Porous Plate Channels Using Thermal Equilibrium and Non-thermal Equilibrium Models, Numerical Heat Transfer: Part A: Applications, vol. 35, no. 1, pp. 99–113, 1999.
   Web of Science ®Google Scholar
• Spalart, P. R., and Allmaras, S. R., A One-equation Turbulence Model for Aerodynamic Flows, AIAA Paper, pp. 92–0439, 1992.
   Google Scholar
• Roncioni, P., Natale, P., Marini, M., Langener, T., and Steelant, J., Numerical simulations and performance assessment of a scramjet powered cruise vehicle at Mach 8, Aerospace Science and Technology, vol. 42, pp. 218–228, 2015.
   Web of Science ®Google Scholar
• Ambrosio, A., and Wortman, A., Stagnation Point Shock Detachment Distance for Flow around Spheres and Cylinders, ARS Journal, vol. 32, p. 281, 1962.
   Google Scholar